Thks, for your information ;
Ninite can launch in service mode ?
Thks, for your information ;
Ninite can launch in service mode ?
Hi, Community
i have found an great software for update all* software installed in your HTPC without requiring user interaction. (...
RDP from 2nd system, do it all the time (installed DLL patch - bingo).
Beware!!! If you have MePo set to autostart on login, when you manage it remotely via RDP, the 2nd user account start up is then also set to autostart MePo on login - which is a pain in RDP session:-) Remember to run msconfig before you log out and untick...
RDP from 2nd system, do it all the time (installed DLL patch - bingo).
Beware!!! If you have MePo set to autostart on login...
Hi,
I'm interested in discovering other software to run on my HTPC. Specifically I'm looking for solutions that are easy to...
I would like to have a Roku channel created for Mediaportal, so I can watch my OTA broadcasts on all of the tvs in my house. I use PlayOn to stream all of my media to my Rokus, but PlayOn does not support OTA. I also do not want to purchase more HTPCs for my home, so I am sure a Roku channel can be created that will do this because...
I would like to have a Roku channel created for Mediaportal, so I can watch my OTA broadcasts on all of the tvs in my house. I use...
I would like to have a Roku channel created for Mediaportal, so I can watch my OTA broadcasts on all of the tvs in my house. I use...
Hi etheesdad,
I have a stable undervolt but it took multiple non-default settings to get there;
- Disabling spread spectrum
- Changing the "transition state" to "single" instead of "multi step"
I run it now with 3 p-states because that was already a pain in the ass to figure out getting stable. I noticed that half multipliers are...
Hi etheesdad,
I have a stable undervolt but it took multiple non-default settings to get there;
- Disabling spread spectrum
-...
Hi guys,
my first post ever here and not a noob but no pro either with RightMarks RMClock.
For all my system specs please see...
Just to put my hat in the ring.
I put all the TV-box sets I buy I use DVD Decrypter to rip the discs to hdd. I then use handbrake to convert them h264/ac3 passthru.
A 42 minute episode takes between 900mb and 1200mb with no loss of quality - a 8gb disc of CSI ends up as 4gb.
I normally run them through with 424 width and...
Just to put my hat in the ring.
I put all the TV-box sets I buy I use DVD Decrypter to rip the discs to hdd. I then use...
Any recommendations about what applications or codecs give the best results? I'm thinking I'm going to use handbrake.fr and either...
Hi,
I use DVDFab. If you rip 3D SBS (side by side) to an MKV file, MP will play it back fine. Just set your 3D TV to view "3D SBS" and your TV will do the necessary to display it in 3D for you.
Cheers,
Colin
Hi,
I use DVDFab. If you rip 3D SBS (side by side) to an MKV file, MP will play it back fine. Just set your 3D TV to view "3D SBS"...
Is there a good way to rip 3D movies for playback in mediaportal? Looking to be able to play them back in 3D.
Thanks,
MP1
MP2
Tools and other software
Ripped DVDs do not fill screen, but downloads do. Ripper Settings?
DE
Hi
It sounds like you don't mind what container the file is in. I'm afraid I haven't used that software to help you with the settings, but I can offer an alternative that works well for me.
Perhaps try doing a DVD with makemkv instead? There is no loss of quality as it simply extracts the film to the mkv container in the original...
Hi
It sounds like you don't mind what container the file is in. I'm afraid I haven't used that software to help you with the...
Mediaportal v1.1.3:
Windows 7:
Codecs
DMO Mpeg4s Decoder DMO mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50...
Hey Guys,
I am using MediaPortal with MediaSlayer to import my movies from inside MediaPortal, is there a way to import tv series using MediaSlayer but have it spit the episodes into seperate files.
Rich
Hey Guys,
I am using MediaPortal with MediaSlayer to import my movies from inside MediaPortal, is there a way to import tv...
Hey Guys,
I am using MediaPortal with MediaSlayer to import my movies from inside MediaPortal, is there a way to import tv...
renameIT: - rename your TV series & movies on your Mac.
Features:
Simple Drag n Drop interface.
Makes use of theTVDB.com & TV.com to get episode names for your shows.
Supports multi-episode files.
Renames both TV Series & Movies.
Lets you add Definition and Quality to your filenames i.e. HD, SD, 480p, 720p
Screenshots...
renameIT: - rename your TV series & movies on your Mac.
Features:
Simple Drag n Drop interface.
Makes use of theTVDB.com &...
renameIT: - rename your TV series & movies on your Mac.
Features:
Simple Drag n Drop interface.
Makes use of theTVDB.com &...
Hello!
I was wondering if anyone knows if there is a way to remap the default keys in PowerDVD? For example, I don't want spacebar to be the pause button I want Tab. I am running PowerDVD Version 6 (Old I know) and I can't seem to find the option anywhere, so I thought maybe the newer versions allowed you to do so or maybe i'm just...
Hello!
I was wondering if anyone knows if there is a way to remap the default keys in PowerDVD? For example, I don't want...
Hello!
I was wondering if anyone knows if there is a way to remap the default keys in PowerDVD? For example, I don't want...
MyFilms, MovingPicture or MyVideos...
i have switched from MovingPicture to MyVideos because MyVideos in MP 1.3 is very good and i don't need another pluign :)
MyFilms, MovingPicture or MyVideos...
i have switched from MovingPicture to MyVideos because MyVideos in MP 1.3 is very good and i...
Hi all.
Before starting this thread i did do a check through the archives but found that they were 2 to 3 years old and due to it...
Recommend two players, you should try VidOn player and VLC player, they support to collect movie info online when you put movie files in your media library. Hope this helps.
Recommend two players, you should try VidOn player and VLC player, they support to collect movie info online when you put movie...
I have a iPhone and I often watch movies with it. I'm looking for a player that can collect movie info online when I put movie...
Downgrade to NVIDIA display driver 190.62 solved the issue.
Downgrade to NVIDIA display driver 190.62 solved the issue.
Hi,
I'am using PowerDVD 7.3 for over 1 year now to play Blu-ray Discs. As long as I used MP 0.2.3 there where no problems to...
Hi,
I have just reinstalled MP and the whole operating system for that fact (now have windows 7). I had this working before but I can't get it set up right now for the life of me!
Basically all I want to do is exit MPC with the escape key. I have my back button mapped to escape and I set the key map in MPC for exit to escape...
Hi,
I have just reinstalled MP and the whole operating system for that fact (now have windows 7). I had this working before but...
Hi,
I have just reinstalled MP and the whole operating system for that fact (now have windows 7). I had this working before but...
i have a problem with Imon and PDVD9.
when i play a blu ray in PDVD9 ultra and Imon manager is running then i have a horrible stutter and no sound.
then i found out that when i close imon manager that the problem is gone.
then i can play blu ray without any problem.
but then i have no remote.
i didn't try this with a dvd or...
i have a problem with Imon and PDVD9.
when i play a blu ray in PDVD9 ultra and Imon manager is running then i have a horrible...
i have a problem with Imon and PDVD9.
when i play a blu ray in PDVD9 ultra and Imon manager is running then i have a horrible...
I did some searching but didn't find much on this in the forums. I imagine there is someone else that has done this, because its really not so hard to use if you know a little powershell and XML.. but consider the following situation:
1. USA user, running Mediaportal on Windows 10 (so you have to use a 3rd party source to get new...
I did some searching but didn't find much on this in the forums. I imagine there is someone else that has done this, because its...
I did some searching but didn't find much on this in the forums. I imagine there is someone else that has done this, because its...
Hi All,
I've just installed PDVD9 Ultra (after getting a new HD TV). Blu Rays seem to work fine, although I have no idea if it is using DXVA (CPU usage ~25%). I have set DXVA to 'enabled' in the PDVD configuration but Paranoid Delusion quoted ~7% so I am not sure if my setup is using hardware acceleration. Is there any other way...
Hi All,
I've just installed PDVD9 Ultra (after getting a new HD TV). Blu Rays seem to work fine, although I have no idea if it...
I just saw that Cyberlink released PowerDVD 9. There is also a Free Trial available.
Has someone tried it already?
DVD Player...
hi guys,
I did have a working version of pdvd8, its h264 codec was working fine with MP1.0.
today I bought a new Bluray (bond, quantum of solace), this said it wouldn't play without a pdvd update. so I let pdvd update. The bluray now plays fine.
but my h.264 code has vanished in mediaportal :growl: . I tried to manually regsvr32 /i...
hi guys,
I did have a working version of pdvd8, its h264 codec was working fine with MP1.0.
today I bought a new Bluray (bond...
Hi,
there's an update for PWDVD!
Hopefully it solves my Problems with some BlueRays (Hulk, Horton hears...)...
I want to have DVDFab passkey auto-load to allow MP to play protected DVD's, which works but I also have a separate account on the PC which I login to via RDP and I need to be able to rip DVD's using that as well, which I do by loading Passkey under that account as well.
The problem is that if Passkey is running, ImgBurn throws up...
I want to have DVDFab passkey auto-load to allow MP to play protected DVD's, which works but I also have a separate account on the...
I want to have DVDFab passkey auto-load to allow MP to play protected DVD's, which works but I also have a separate account on the...
I use Acronis software. Never had problem with it. Even Raid0 drives were possible to mirror from a bootable CD.
ps: Shaun is coool lol
I use Acronis software. Never had problem with it. Even Raid0 drives were possible to mirror from a bootable CD.
ps: Shaun is...
Hello,
I have just one HDD in my single seat HTPC, with the OS and MP on the C partition, and all the media files, recordings...
I almost had my HTPC the other day to a state where I had everything covered.
The last issue I was having I could not resolve (ANYDVD locking up the system) and attempts at fixing it only broke Windows MCE 2005 more.
I ended up reinstalling Windows only this time Windows XP Professional.
A couple of things I just cannot get...
I almost had my HTPC the other day to a state where I had everything covered.
The last issue I was having I could not resolve...
I almost had my HTPC the other day to a state where I had everything covered.
The last issue I was having I could not resolve...
- Locked
mmmm, I just saw you posted same question to the relevant thread.
As cross posting is against out forum rules, I will rather close this thread.
mmmm, I just saw you posted same question to the relevant thread.
As cross posting is against out forum rules, I will rather close...
I have a problem I was hoping someone could help me with.
How does the Dynamic Refresh Rate feature in MP identify the frame rate...
MP1
MP2
Tools and other software
MusicBrainz Picard - Script renaming/moving files ( no help / sharing only )
DE
I am doing that with my own MPTagThat
I am doing that with my own MPTagThat
Hello,
i want to share my script for rename/move Audio files using Musicbrainz Picard.
for information, an portable is available...
MP1
MP2
Tools and other software
Movie Preparer - A tool to batch- tag mkv files with given XML Tagfiles.
DE
Hi.
As I've started development of MKV Buddy "Movie Preparer" is obsolete. So no more support or development for this program. I want to thank all who had used this tiny tool and I hope it was useful at least a bit.
MKV Buddy did not need extra .xml tag files, it tags directly from the existing .nfo files. I believe this is a step...
Hi.
As I've started development of MKV Buddy "Movie Preparer" is obsolete. So no more support or development for this program. I...
Hi.
I've done a little Tool named Movie Preparer to tag MKV Video Files with given XML Tagfiles. You can use Tiny Media Manager to...
Dear community,
please find the latest version 1.2.4 of my Monitoring Collection in the first post of this thread, appropriate installer files are available on my homepage here or in the Heise download archive. According to a personal feedback you will find attached a license key for evaluation purposes, which is valid for 30 days...
Dear community,
please find the latest version 1.2.4 of my Monitoring Collection in the first post of this thread, appropriate...
Tools to monitor your machine devices, activities and performance
These are not specific MediaPortal related tools, but maybe it's...
MP1
MP2
Tools and other software
MkvTagger: Edit tags MKV tags (incl. MP-TVSeries, TheTvDB.com, TheMovieDB, MusicVideos ...)
DE
Hi.
The easiest way to have 100% match for movies is to use the tt number as video name. E.G. a video with name tt0111282.mkv is 100% secure identified as "Stargate (1994)" MKV-Buddy renames the finished videos automatically to your like, so this input- name is no problem at all.
Series are a bit more to do. You need a sub-folder for...
Hi.
The easiest way to have 100% match for movies is to use the tt number as video name. E.G. a video with name tt0111282.mkv is...
Which tagger do you use for modifying the tags of your music files (MP3 ID3, ....)?
Mp3tag? MusicBrainz Picard? MPTagThat? foobar...
I apologize for my novice question but can it convert from ISO to MKV lossless?
I apologize for my novice question but can it convert from ISO to MKV lossless?
Introducing MkvBatcher
http://www.mkvbatcher.com/
MkvBatcher Free is a fully automatic Blu-ray/DVD ripper and video batch...
- Locked
Hi.
I'll close this post as MKV Buddy is history The future is here:
Media-Buddy - the MKV Buddy successor.
Hi.
I'll close this post as MKV Buddy is history The future is here:
Media-Buddy - the MKV Buddy successor.
Hi.
I like to introduce you a tool I've developed. It's called "MKV Buddy" . The main goal of MKV Buddy is to simplify and speed up...
Hi all
I am searching for Software/Driver for the:
Megtron LCD Modul 240x128 Pixel - intern
Version:1.3.01 or an other
Happy Hollidays Mathmos
Hi all
I am searching for Software/Driver for the:
Megtron LCD Modul 240x128 Pixel - intern
Version:1.3.01 or an other
Happy...
Hi all
I am searching for Software/Driver for the:
Megtron LCD Modul 240x128 Pixel - intern
Version:1.3.01 or an other
Happy...
i have Eset Antivirus only, not tried the V8 yet.
i have exclude all MP folder, from scanning, due to TS timeshift bufer.
i have Eset Antivirus only, not tried the V8 yet.
i have exclude all MP folder, from scanning, due to TS timeshift bufer.
Hi,
I'm using ESET Smart Security and recently updated to version 8. Since this update after the start of MP the very first...