TV-Cards (44 Viewers)

Discussions about TV-Cards and their drivers in here
Hi all I'm contemplating building a new HTPC. My current one is a hacked up and beaten up HP Pavilion Slimline with a full size Pinnacle 7010ix card fitted (not very well I may add) internally. I am looking to build a more permanent solution on a not-too-extravagant budget. As most of the Mini ITX cases out there only seem to...
Hi all I'm contemplating building a new HTPC. My current one is a hacked up and beaten up HP Pavilion Slimline with a full size...
Hi all I'm contemplating building a new HTPC. My current one is a hacked up and beaten up HP Pavilion Slimline with a full size...
Replies
0
Views
1K
  • Locked
Sorry kohle - no help with MDAPI related topics on this forum. https://forum.team-mediaportal.com/threads/mdapi-softcam-support-again.12620/
Sorry kohle - no help with MDAPI related topics on this forum...
ich habe da ein Problem mit der acamd wenn ich die einschalte dann kann ich nur 3 tuner benutzen, wenn ich den 4 ten anspreche...
Replies
1
Views
2K
Okay, I understand. I will find out, what I have.
Okay, I understand. I will find out, what I have.
Which external TV-Card can you recommend for a notebook? I want to record / schedule cable junction TV programs. Watch the...
Replies
6
Views
2K
Thanks for all the support mm! I have now ordered TT 3200 in order to keep it simple and cheap to start with when switching from cable to satellite. Still need a second card and those TBS cards are looking extremely good both in terms of performance and prices, so I'm looking forwards for news about official CAM support. Any...
Thanks for all the support mm! I have now ordered TT 3200 in order to keep it simple and cheap to start with when switching from...
Hi all, After 6+ years with MePo and DVB-C I will be switching to DVB-S and need some advice on a choice of card. Only real...
Replies
9
Views
3K
Hello again bafikk So if you delete that key I think it should fix the problem on the first PC. Note that the key could be registered more than once. mm
Hello again bafikk So if you delete that key I think it should fix the problem on the first PC. Note that the key could be...
Dear MP users, I bought Technisat SS USB 2 HD with CI module a few days back, I tried tune channels over ProgDVB/DVBViewer and...
Replies
9
Views
7K
It depends, if he is connected to an analog cable, he would use the analog part.
It depends, if he is connected to an analog cable, he would use the analog part.
Was attempting to set up media portal today and was notified that my card is not supported and to report it to the forum. The card...
Replies
2
Views
1K
That clears is up. Thank you.
That clears is up. Thank you.
I have been using MP for about 2 years now and it has become my main source for music, videos and online movies/tv series. Thank...
Replies
13
Views
2K
...its time again :) DVB-T card is now 5 euro - http://www.kjell.com/sortiment/ljud-bild/tv-tillbehor/digitalboxar/for-datorn/plexgear-micro-dvb-t-p98698 /tompa
...its time again :) DVB-T card is now 5 euro -...
Hi! I just want to report that the USB DVB-T receiver from Kjell & Company named Plexgear works just fine with mp and win 7 (I...
Replies
7
Views
7K
Hi Erichzann, The only channels that I know of where a CAM is needed for additional channels is for access to Sky, the satellite broadcaster. As far as I know this needs a valid subscription to work, and discussion relating to this is frowned upon in this forum. A source of information relating to CAM's and access can be found...
Hi Erichzann, The only channels that I know of where a CAM is needed for additional channels is for access to Sky, the satellite...
Hello again, apologies for any spelling mistakes in this, sleepless nights make me do silly things and my brain is a bit fuzzy...
Replies
8
Views
2K
if not on this forum.... where? :-)
if not on this forum.... where? :-)
Hi, Does anyone know of a CI solution for Cablecom in Switzerland? I have a TechoTrend Budget C-1501 which worked fine with...
Replies
6
Views
2K
yes it was my TV-card that was damaged by overheating
yes it was my TV-card that was damaged by overheating
Hi I have a TC-card that have a DTV-DVBT 878 card that I have been very happy with. But now I start have to have strange problem...
Replies
2
Views
1K
Just for information, I have a 6280 card (dual tuner) and recently had problems with poor signal. It appears that the card was getting too hot (we've actually had a bit of warm weather - the card certainly felt hot). Moving it to a higher PCI-e slot with better cooling got things back to normal, although I'll be adding some more...
Just for information, I have a 6280 card (dual tuner) and recently had problems with poor signal. It appears that the card was...
I feel the time has come to experience some dvb-t2 HiDef goodness, so I'm looking for a suitable TV card. The TBS 6284 caught my...
Replies
13
Views
6K
Well, I can't for the life of me figure this out properly... I modified the files in the guide as it said, except I replaced each instance of eth0 with wlan0 and each eth1 with eth0, since those are the network adapters I would be using. I think I placed the STB's MAC address in all the places it should be but I was unclear on a few...
Well, I can't for the life of me figure this out properly... I modified the files in the guide as it said, except I replaced each...
I'm lacking knowledge regarding TV cards and before I go about looking into buying one for my HTPC (which is still in the mail) I'd...
Replies
20
Views
3K
Excellent! Cheers for reporting back. :)
Excellent! Cheers for reporting back. :)
First time media portal user, but expericend self employed computer service technician. On my personal HTPC, I have not been...
Replies
4
Views
1K
Hi and welcome b1ll This reply is probably so late as to be irrelevant, but just in case - I suspect your LNB settings ("band type") did not match the actual LNB that you have. mm
Hi and welcome b1ll This reply is probably so late as to be irrelevant, but just in case - I suspect your LNB settings ("band...
Hi, I'm continuously failing to get my TV Card working in MP. (In Windows 7 Mediacenter and DVBViewer it works just perfect) In...
Replies
3
Views
3K
Hello and welcome schwarzrz You will need to stick with 1.2.1 or 1.2.2 for the moment. It would help if you could post your logs so that I can check exactly what the TV Server is doing: http://wiki.team-mediaportal.com/Forum/How_to_post_logs mm
Hello and welcome schwarzrz You will need to stick with 1.2.1 or 1.2.2 for the moment. It would help if you could post your logs...
Just got one of these to replace my pair of s2-3200 cards since they are flaky under win7 and support from tt seems to be non...
Replies
102
Views
14K
Maybe people could also mention whether they have any reception problems with their card(s) and if they've noticed any continuity errors in the logs, but I'd mainly like to see a comparison of signal strength/quality by card for users to refer to.
Maybe people could also mention whether they have any reception problems with their card(s) and if they've noticed any continuity...
I thought it would be useful to have some information on what signal strength users are getting with UK Freeview DVB-T (now that...
Replies
11
Views
5K
Hmm, I'm going to try that. I rarely need two tuners at the same time, although it would be nice to have such an option. Thanks for the tip! :)
Hmm, I'm going to try that. I rarely need two tuners at the same time, although it would be nice to have such an option. Thanks for...
I'm currently looking for a replacement for my FireDTV-cards, and I contacted a webshop that specialises in HTPC-parts here in...
Replies
3
Views
3K
I guess I`m not in the right forum ... :( But. thanks for the views!
I guess I`m not in the right forum ... :( But. thanks for the views!
Hello, I need some help here, please. I have a Cinergy C PCI HD installed in my PC. Windows x64 shows that the driver are installed...
Replies
1
Views
2K
In Australia I'm using a DigitalNow DVB-T Quad under ForTheRecord & a friend uses one under MP TV Server - both fine. The DN Quad uses Realtek tuners & does DAB/DAB+ too (not in MP though).
In Australia I'm using a DigitalNow DVB-T Quad under ForTheRecord & a friend uses one under MP TV Server - both fine. The DN Quad...
Has anyone tried the new BGT3650 yet? Looking to upgrade my Nebula cards for something HD, plus the quad capabilities are of...
Replies
3
Views
3K
No problem! Good to know it works now. =)
No problem! Good to know it works now. =)
Hello, I have a Digital Devices Cine S2 V5.4. The card works in Windows Media Center and the TV-Server Configuration from...
Replies
7
Views
2K
I'd go for a used Hauppauge card from eBay. You can get dual tuner cards for relatively cheap in both PCI and PCI-e.
I'd go for a used Hauppauge card from eBay. You can get dual tuner cards for relatively cheap in both PCI and PCI-e.
Hi, I am just discovering MediaPortal and it looks to be a great fit for me. I have an older PC that I have setup to experiment...
Replies
2
Views
2K
Ok, I finally bought this card. I also confirm that it has 2x DVB-T and 1x DVB-C tuner. Not worth to use the CD, because it has an older driver on it, which does not support the DVB-C tuner, so download the latest! I was able to record all TV stations on one transponder frequency! And watch one of them of course! This is good news...
Ok, I finally bought this card. I also confirm that it has 2x DVB-T and 1x DVB-C tuner. Not worth to use the CD, because it has an...
The Terratec Cinergy T PCIe Dual works fine with Mediaportal (for example on resume from standby S3/S4)? It is a good choice for...
Replies
18
Views
10K
Just got my Technisat CableStar HD2 :) I will tell you if it is good for MP. For now I'm testing it without CAM but fta channels still not showing ("all cards are busy" popup and "channel encrypted but card has no cam" message in log ). But in "manual control" page during epg grabbing i see "Scrambled: no". As I remember FTA detection...
Just got my Technisat CableStar HD2 :) I will tell you if it is good for MP. For now I'm testing it without CAM but fta channels...
Hi Guys, Im looking for a good DVB-C card for my second HTPC. My 1st HTPC has a FIreDTV Card but as they are no longer in...
Replies
11
Views
5K
oops :oops: i imagined that because it does PIP it was dual tuner. Obviously didn't look hard enough at it. Thanks.
oops :oops: i imagined that because it does PIP it was dual tuner. Obviously didn't look hard enough at it. Thanks.
Hi all I have a Leadtek DTV Gold USB DVB-T dongle which has dual digital tuners. MediaPortal's TV Streamer v 1.2.2.0 can only...
Replies
2
Views
2K
Hi, I need a analog card, preferable with a hardware encoder and PCIe interface. Are the wintv hvr 1700 / 2200 cards supported in Media portal? Any recommendations for another analog card? Should work under win7/64bit. Thanks!
Hi, I need a analog card, preferable with a hardware encoder and PCIe interface. Are the wintv hvr 1700 / 2200 cards supported...
Hi, I need a analog card, preferable with a hardware encoder and PCIe interface. Are the wintv hvr 1700 / 2200 cards supported...
Replies
0
Views
898
Hi, Ive got a Compro VideoMate E700F and I was wondering if anyone can suggest a better low profile dual-tuner, this one is absolutely crap.... it continuously freezes and you just cant watch or record TV shows.. its unbearable.. Any suggestions on hardware or ideas would be great
Hi, Ive got a Compro VideoMate E700F and I was wondering if anyone can suggest a better low profile dual-tuner, this one is...
Hi, Ive got a Compro VideoMate E700F and I was wondering if anyone can suggest a better low profile dual-tuner, this one is...
Replies
0
Views
933
it would be nice if there is a feature that allow you to view all the channel on the same transponder at once. instead of going through multiple channels one by one. audio could be switchable as well when you press on the relevant channel. this would be a really cool thing to have
it would be nice if there is a feature that allow you to view all the channel on the same transponder at once. instead of going...
Hi, I am looking to buy my first tv card (DVB-S2): 1- cheaper the better. dont have huge budget 2- I am NOT interested in...
Replies
10
Views
5K
I have this problem with trying to scan for channels. I can give you any information you need, just tell me how
I have this problem with trying to scan for channels. I can give you any information you need, just tell me how
I have this problem with trying to scan for channels. I can give you any information you need, just tell me how
Replies
0
Views
1K
Top Bottom