Hi again
I have to say that it is not looking promising. Just to confirm:
1. You have one hybrid card group containing all three Cinergy HTC tuners. The Cinergy is not a dual tuner so you need only *one* hybrid group.
2. You are not using the tuner in other software at the same time as you're testing in MP.
If that is the case...
Hi again
I have to say that it is not looking promising. Just to confirm:
1. You have one hybrid card group containing all...
Hello,
thanks for reading this.
I know, this toppic might be boring for most of your, but it is a hazzle.
I did several...
Hi rsbrux
Theoretically, yes - only one CAM needed. The tuners share the CAM and each tuner can decrypt one channel. The thing that I have noticed from people's comments on the forum is that some CAMs don't work well. If you get a good CAM then it will work nicely; if you get a bad CAM then you will have trouble. I'm not able to...
Hi rsbrux
Theoretically, yes - only one CAM needed. The tuners share the CAM and each tuner can decrypt one channel. The thing...
I'm about to set up a 4 dvb-c tuner system with mediaportal, and am wondering what the best option for dual dvb-c tuner is?
Can...
on your head may it be "mm"...i have taken the plunge and ordered the TBS 8920...and if it turns out to rubbish, i know who to point the finger at!!!! :rolleyes:
only joking mate...i appreciate the advice...and for the short term...i think that the card will do us just fine. and when the blackgold does finally arrive (09/01/12...
on your head may it be "mm"...i have taken the plunge and ordered the TBS 8920...and if it turns out to rubbish, i know who to...
hi all....
i am in need of a little help with which tv tuner card i should get....
basically, this is my very first HTPC...
Hi Pietertje
So just to clarify: you have physically installed the tuner and then installed the drivers but there are no tuners listed (apart from the DVB-IP and radiowebstream tuners) when you look at the tuner list in TV Server configuration?
Have you checked whether the tuner is listed in device manager? If it is installed...
Hi Pietertje
So just to clarify: you have physically installed the tuner and then installed the drivers but there are no tuners...
My system (XPPro Sp3) Pavilion m 7680.nl-a Media Center has on board an Asustek LNA Tiger Hybryd Tv card. This card is not...
Hi lukjod
Sorry I can't test. The list of CAMs that you found is only the ones that TBS have tested. Many others would probably also work. Since these devices are so new you might need to take a risk and buy a CAM without certain confirmation - might be wise to buy from a place where you can return and get a refund if it doesn't...
Hi lukjod
Sorry I can't test. The list of CAMs that you found is only the ones that TBS have tested. Many others would probably...
Hi,
i recently bought TBS 5980 qbox with ci-slot for streaming with dvbviewer pro 4.5 over lan to their online store.
Receiving...
to come back to original topic of the post. I continued my investigation there:
https://forum.team-mediaportal.com/tv-cards-333/cine-s2-ci-does-not-work-102198/index2.html#post818379
to come back to original topic of the post. I continued my investigation there...
Hi,
I am thinking getting rid or m'y floppy-dtv s2 and m'y nova-CI to get a new dual tuner dvbs2 card that would décode...
Thank you mm1352000!!!
This is still early testing, but by the looks of it it seems very promising. Good work.
I´m now testing the tvlibrary.dll.exp.
I´ll post later with a more detailed report.
Cheers,
bluebear.
Thank you mm1352000!!!
This is still early testing, but by the looks of it it seems very promising. Good work.
I´m now testing...
Hi!
Just installed a TBS-6922. I used my old scanned channels and mapped it to the TBS card.
They were scanned with LNB A set to...
An update for anybody reading in the future...
I've just posted a patch -->here<-- that should greatly improve our support for new TBS products.
mm
:)
An update for anybody reading in the future...
I've just posted a patch -->here<-- that should greatly improve our support for new...
TBS DVB-S2 Quad tuner TV Card, PCIe x1 (6984).
I know that this card is pretty new (and pretty expensive), but was wondering...
Hi and welcome dominionman :)
I guess my first comment would be that a capture setup is very different to a DVB-S/S2 setup. I think you kinda need to decide which option you want to choose there. From an MP perspective we don't support any "pure" capture cards except the Hauppauge HD-PVR and Colossus. We do support capture inputs on...
Hi and welcome dominionman :)
I guess my first comment would be that a capture setup is very different to a DVB-S/S2 setup. I...
I am looking to possibly build an HTPC and subscribing to satelite in the US. I have been using XBMC for years and am looking at...
Thanks, I did understand that Chuck, what I meant to say is that the resolution that is presented to the plasmascreen is not important because it is looked at from a distance, that is also why I want it to be fulscreen.
I am still steamin' around so just a short message and I am off again.
Please do not mistake my timeshortage for...
Thanks, I did understand that Chuck, what I meant to say is that the resolution that is presented to the plasmascreen is not...
I guess I have one of the simplest questions but I cannot find an answer after Google-ing all night.
I have a yellow plug and I...
The dvbs2patch broke also channels that where working so I deleted the drivers and sat reg settings(from the patch) and installed dvbviewer. DVBviewer had the channels already installed. I found a free HD channel (1080P ) that worked. I didn`t get the softcam working so I don`t know if the Canal digitaal channels work.
I also...
The dvbs2patch broke also channels that where working so I deleted the drivers and sat reg settings(from the patch) and installed...
I could n`t react on this topic...
Hi BAMxi i do use the HVR-2250 and it's working like charms. Go for it ! Great pictures and easy to setup.
Hi BAMxi i do use the HVR-2250 and it's working like charms. Go for it ! Great pictures and easy to setup.
Hi!
So I'm trying my hardest to get up to speed with all of you pros. I'm currently researching tv tuners, and am looking at...
It looks like the Peak website is no longer accessible. I managed to find and download the relevant file DVBT-w7.exe from a Czech file sharing site (fortunately I was using Google chrome as a browser so it translated it for me)
For those who may need it in future here is the link >>>here<<<
They are the proper Peak drivers for...
It looks like the Peak website is no longer accessible. I managed to find and download the relevant file DVBT-w7.exe from a Czech...
Hi Guys,
I'm just getting all my stuff together before I do a clean install of Win 7 x64.
I cannot seem to access...
it was mostly codec settings.
it was mostly codec settings.
im having trouble getting media portal to work with win2k8 server r2. the bgt 3600 works fine with win7 x64. i installed the same...
Thank You for your help mm1352000. I have attached my logs.
I found the fix. I'm on server 2008 r2 and didn't install the BDA drivers. Thanks anyway.
Thank You for your help mm1352000. I have attached my logs.
I found the fix. I'm on server 2008 r2 and didn't install the...
Hi, I'm a noob to mediaportal and trying to get my tvserver working. I followed the wiki and some posts, but can't get my...
Hi, and welcome :)
Please post your log files.
See: How to gather log files - MediaPortal Manual Documentation for instructions.
Btw, you might wanna remove your e-mail address.
Hi, and welcome :)
Please post your log files.
See: How to gather log files - MediaPortal Manual Documentation for instructions...
DONT KNOW IF THIS IS THE RIGHT PLACE FOR TECH SUPPORT BUT,
I have a happauge HVR 950 TUNER installed on my dell, Win XP operating...
What about this card:
AVERTV VOLAR HD PRO
Is it good for using with MP ??
What about this card:
AVERTV VOLAR HD PRO
Is it good for using with MP ??
Hi guys,
I´m a user of mediaportal for arround 3 years and I´m very pleased with this software,for me that´s the best for htpc...
Hi and welcome PJBonoVox :)
This is definitely a Windows or Peak driver issue. You could try to write a devcon script that disables one of the tuners just before shutdown and re-enables it and then starts TV Server 30 seconds after boot (after the other tuner instance has been assigned a PCI device path). That may help to ensure a...
Hi and welcome PJBonoVox :)
This is definitely a Windows or Peak driver issue. You could try to write a devcon script that...
Hi all,
I'm currently using two identical Peak DVB-T dual tuners in my MediaPortal machine. The two cards function fine, and all...
Hi Brian
Yes, I would say it will very likely be included in 1.3.0a.
If you ask me, the entire MP EPG system needs an overhaul. That might be part of it. We'll have to see what happens. As always, the shortage is in developers.
mm
Hi Brian
Yes, I would say it will very likely be included in 1.3.0a.
If you ask me, the entire MP EPG system needs an overhaul...
Hi all,
I've seen some similar posts to this but can find nothing for sale. There is a Geniatech X8000T PCI card in Amazon but...
Hi pheonixsingh
No, not that I know of.
mm
Hi pheonixsingh
No, not that I know of.
mm
Is there currently any way to get mediaportal to use a dreambox as a tuner?
Hi everyone
BSODs generally indicate hardware or driver issues, but they can be triggered by software doing things in specific ways that the drivers don't like.
I have a version 2.0. It looks quite similar to version 2.1 - just lower quality capacitors I think. Works fine.
I understand that you are frustrated, however blaming...
Hi everyone
BSODs generally indicate hardware or driver issues, but they can be triggered by software doing things in specific...
Is the TeVii S480 Dual DVB-S2 HDTV PCIe supported by MediaPortal?
TeVii S480 Dual DVB-S2 HDTV PCIe Diseqc 1.2/2.0 Low profile -...
I have no problems anymore with 2x floppydtv+astoncrypt 2.18 and 2.23 firmware. Multidecode on both cards.
Have you seen this topic: https://forum.team-mediaportal.com/television-mytv-frontend-tv-server-90/floppydtv-fix-propblems-cam-stop-working-89726/
Greetings,
Wouter
I have no problems anymore with 2x floppydtv+astoncrypt 2.18 and 2.23 firmware. Multidecode on both cards.
Have you seen this...
Hello,
I want to use my dutch Canal Digitaal card with my new Digital Devices Cine S2 with CI-module.
The problem I'm facing...
I am having the most difficult time getting the media portal to work with the hauppage hdpvr that I just brought. I can't get it to detect the channels, or to play live tv, or record tv(schedule) in mediaportal. I really like the program and am trying to get off of mce.. but can't make this work. Does anyone have a walkthrough or can...
I am having the most difficult time getting the media portal to work with the hauppage hdpvr that I just brought. I can't get it to...
I am having the most difficult time getting the media portal to work with the hauppage hdpvr that I just brought. I can't get it to...
Hi again Matt
Thanks for following up! :thx:
TV Server only detects tuners on start up (which usually happens on Windows startup) so that could have had something to do with it too. If you plug in the PlayTV after TV Server has started then you can always use the "manual control" section of TV Server configuration to stop and then...
Hi again Matt
Thanks for following up! :thx:
TV Server only detects tuners on start up (which usually happens on Windows startup)...
Hello all.
I have been using my PS3 PlayTV USB Tuner in Windows Media Center without any problem. I've tried installing...
Thanks for info, still seems overkill and availability seems to suck :(
Thanks for info, still seems overkill and availability seems to suck :(
Hallo,
I want to buy a new TV card for my HTPC project. I am looking for a DVB-S2 (HDTV) dual tuner card. So I found this product...
Okay.
"Auto" in DVBViewer is probably "not defined" or "not set".
For the 3650 people have been recommending 1.0.2.20, but I don't have the tuner so I can't confirm. Other drivers might be better - most people would not have tried the drivers from the other resellers.
Take the example of switching to SAT.1 in your logs. Deciding...
Okay.
"Auto" in DVBViewer is probably "not defined" or "not set".
For the 3650 people have been recommending 1.0.2.20, but I...
Hello everybody, and especially the ones with a technisat cablestar combo, a terratec H7 or Technotrend TT-connect CT-3650.
1...
Just for info, this tuner is WAY more sensitive on both DVB-S and -T than my old ones (Hauppauge HVR3000 and Twinhan 3020C). I can now pick up all DVB-S FTA channels, including ones on Eurobird - I spent ages fiddling with my dish positioning before to try to get channels like Scuzz and the Zone ones to work reliably, now they just...
Just for info, this tuner is WAY more sensitive on both DVB-S and -T than my old ones (Hauppauge HVR3000 and Twinhan 3020C). I can...
I'm trying to install a BlackGold BGT3600 in my HTPC, which is running XP Home SP3. The driver claims to support XP, but as soon...
Unfortunately not - right now I'm using it to connect to my cable provider's unencrypted DVB-C service. I bought this unit because if I move then I might need to use a card to get access to some channels using DVB-T however this won't be happening anytime soon.
Unfortunately not - right now I'm using it to connect to my cable provider's unencrypted DVB-C service. I bought this unit because...
Do you have any recomendation for a dvb-t card with CI-slot that works with MP?
DVB-T2 would be nice, but a requirement.
I've...
An update on my findings so far.
Ihave now got the t500 in my possesion and have tried it in my work machine:
Foxcom MCP61M2MA
OS Name Microsoft Windows XP Home Edition 32bit
Version 5.1.2600 Service Pack 3 Build 2600
AMD 4000+ 64bit dual core 2.11ghz
Total Physical Memory 3,072.00 MB
Graphics Nvidia GeForce 9800gt
Seagate baracuda...
An update on my findings so far.
Ihave now got the t500 in my possesion and have tried it in my work machine:
Foxcom MCP61M2MA
OS...
Has anyone tried the following cards in combination.
Hauppauge t500, TD500 and hvr1110.
I have all three cards each work...
Great :)
These are quite old threads. I don't think the first thread has anything to do with this problem, but the second one might so I have commented there and updated the wiki (here). If you turn on preloading then you have to be aware of the potential consequences - if TV Server attempts to load the tuner before the driver is...
Great :)
These are quite old threads. I don't think the first thread has anything to do with this problem, but the second one...
Hi anybody,
just setup a new HTPC with Windows XP prof. en 32bit and a TechnoTrend tt-budgert S2-1600 DVB-S Card.
After spending...