This can be set in MP Config: go to the Audio Settings tab of the TV Client and activate "Prefer AC3-Sound"
However, this setting also forces AC3 when better sound is available. For example DVD's will also play as AC3 instead of DTS and you will nedd to activate the latter manually.
Regards, HTPC_Sourcer
This can be set in MP Config: go to the Audio Settings tab of the TV Client and activate "Prefer AC3-Sound"
However, this setting...
New to Media Portal, long time WMC user. I've been converting all my DVDs to m4v using basically Handbrake's AppleTV 2 preset...
I have been using the client now for a few weeks and it still continues to play really well using RTSP. I will be sure not to allow windows to update any of the drivers as I suspect Ray is correct about this being the cause of the problem.
I have been using the client now for a few weeks and it still continues to play really well using RTSP. I will be sure not to allow...
After some investigation I found in the general > software encoder section that the TV server things there are no software encoders installed. The whole list is flagged 'no'. I then checked GraphEdit and found the now four mpeg encoders i installed (intervideo, mainconcept, avermedia and some more) so they are on my system. I...
After some investigation I found in the general > software encoder section that the TV server things there are no software encoders...
Dear all,
Since I recently found out about the TV server functionality of mediaportal and because I am a opensource fan, I wanted...
Hello
I am using LAV with DXVA2 native via a SAF 6.1.0 installation, on my AMD E350 client.
When i play a video, the section in the lav settings that says 'Active Decoder' always says <inactive>.
I guess i would have expected this to change when playing a video. Processor is around 30-35% on a full bluray mkv rip, and goes to 100%...
Hello
I am using LAV with DXVA2 native via a SAF 6.1.0 installation, on my AMD E350 client.
When i play a video, the section in...
Hello
I am using LAV with DXVA2 native via a SAF 6.1.0 installation, on my AMD E350 client.
When i play a video, the section in...
https://forum.team-mediaportal.com/threads/tvlibrary-tvexception-unable-to-add-unable-to-connect-audio-compressor-muxer.107440/#post-860924
there are some links to trials. And you can find ATI AVIVO DirectShow encoder version in Google (be aware that new ATI Media encoders are for Media Foundation and do not supported by MP) :)
Hi guys,
I get this error msg sometimes simply by playing recorded videos and restarting the client solves it.
Because I had different other issues as well, I did a clean install of v1.2.3 - after having uninstalled server & client completely + LAV filters.
Now I'm running MP almost with default settings and no plugins because I...
Hi guys,
I get this error msg sometimes simply by playing recorded videos and restarting the client solves it.
Because I had...
Hi guys,
I get this error msg sometimes simply by playing recorded videos and restarting the client solves it.
Because I had...
Thanks a million for providing such a quick and helpful response! I now have audio on the HD channels
Much appreciated and the link to logs will be handy should I encounter any more issues
Thanks again
Thanks a million for providing such a quick and helpful response! I now have audio on the HD channels
Much appreciated and the...
MediaPortal Version: 1.2.1
MediaPortal Skin: wide blue or pure vision HD
Windows Version: W 7 x64
CPU Type: Intel I3-2100
HDD...
Hi Guys,
The ability to play certain file types only in an external player has now been added to Deda's "MyVideos rework" build in Area 51 (https://forum.team-mediaportal.com/threads/my-videos-rework-for-mp-1-3-0.97254/) if you want to try it.
See ScreenShot004.jpg in the first post to see the configuration screen.
Cheers,
Mick.
Hi Guys,
The ability to play certain file types only in an external player has now been added to Deda's "MyVideos rework" build...
Hello.
I have read several posts that you can configure the external player to play only specific files, but I have not found is...
du redest hier über kauf-br?
das wird mit dem bdhandler alleine nicht funktionieren (kopierschutz),
es würde dann noch der fuchs benötigt, ob es mit dem funktioniert kann ich aber auch nicht wirklich sagen.
zweite und legale möglichkeit ist den pdvd als externen player einzubinden...
du redest hier über kauf-br?
das wird mit dem bdhandler alleine nicht funktionieren (kopierschutz),
es würde dann noch der fuchs...
Sehr verehrtes Forum,
bisher konnte ich mir immer selbst helfen, muss jedoch erstmalig eure Hilfe in Anspruch nehmen.
Ich habe...
Try going into MP config\music\music extensions and try removing .mp4, does this change things.
After that really think the MX4 is way underpowered both graphically and in its memory to create a gui and play a h.264 file, even if it is SD.
Sorry
Try going into MP config\music\music extensions and try removing .mp4, does this change things.
After that really think the MX4...
Hi there,
I am running MP 1.1.2, Win XP, SAF 4.0 and I have upgraded Media Player Classic the 1.6.1.
My issue is that I can run...
Hi,
I have a stereo only installation, and I'm looking for the best audio quality in both music and videos (I have a lot of DVD/Bluray rips concerts)
I'm using the intel mainboard spdif output, that is connected to my stereo DAC.
So I'm a little bit confused with choosing the best settings.
Bit-Perfect, asio, wasapi, exclusive...
Hi,
I have a stereo only installation, and I'm looking for the best audio quality in both music and videos (I have a lot of...
Hi,
I have a stereo only installation, and I'm looking for the best audio quality in both music and videos (I have a lot of...
The recent versions of LAV video decoder support DXVA, so that's another alternative to FFDShow DXVA.
If you press shift+1 (!) on the keyboard when video is playing it will display the render stats screen - it can't tell you if DXVA is in use, but it does list the codecs in use so you can check if they are what you expect....
Tony
The recent versions of LAV video decoder support DXVA, so that's another alternative to FFDShow DXVA.
If you press shift+1 (!) on...
In the past I used ffdshow DXVA and could get hardware acceleration when playing MPEG4 avi files, but recently I installed...
thread closed for obvious reasons. Please move to private conversation.
And while where at it: a warning for .de-users not to download that stuff for testing. That TWD-crap is heavily logged.
thread closed for obvious reasons. Please move to private conversation.
And while where at it: a warning for .de-users not to...
apologies if this is in the wrong place.
last few (final 3) episodes of walking dead (series2) cause MP to hang for me. I also...
I have the same problem, I want to set the gain separately, for example, if I play the video with mp3 track no gain needed, but if I play the video with ac3 or DTS track the codec will auto check it and set the gain +3db in automatic mode.
if i set the gain in ffdshow, this gain is for all type of track and the mp3 will be too high.
I have the same problem, I want to set the gain separately, for example, if I play the video with mp3 track no gain needed, but if...
hi all,
is there a solution for increase volume in videos ?
there is a large difference between MP3 and Divx and MKV audio.
is...
You read my mind, I ended up pulling the Xonar completly and I'm just using the onboard optical now. So far, it works fantastic. I ended up putting the Xonar into another PC I have running MP in my bedroom which is very similar to this one, but it seems to work perfectly there, too. Go figure.
You read my mind, I ended up pulling the Xonar completly and I'm just using the onboard optical now. So far, it works fantastic...
MediaPortal Version: 1.2.1
MediaPortal Skin: STreamedMP
Windows Version: XP
CPU Type: Q9400
HDD: lots
Memory: 4gb ddr2\800...
LAV video filter used to be separate from LAV CUVID video filter but now they are all in one filter
go to the properties page inside the filter(use graphstupidnext [in SAF 6.0]) there u can set which video filter it should use
nvidia uses CUVID, ati does not
LAV video filter used to be separate from LAV CUVID video filter but now they are all in one filter
go to the properties page...
Hi Guys,
I am having problems trying to open the LAV Video Configuration. When I click on it (under the programs list), nothing...
go to audio renderer in the configuration app - make sure its set to "default sound device" .. if that doesnt work try the name of the device you are using
go to audio renderer in the configuration app - make sure its set to "default sound device" .. if that doesnt work try the name of...
Hi everyone,
Ive recently discovered that my HTPC doesnt appear to be outputting stereo sound on MKV's. DTS/Dolby work...
I'm pretty sure that your problem is your onboard x4500HD. I Had an onboard ATI HD4250 and was not able to play 1080i60 materials properly. Onboard graphic is only good for progressive materias IMHO.
Videocard recommandation : I have a geforce 420 GT with a small score of 562 here http://www.videocardbenchmark.net/high_end_gpus.html...
I'm pretty sure that your problem is your onboard x4500HD. I Had an onboard ATI HD4250 and was not able to play 1080i60 materials...
MediaPortal Version: 1.2.1.0
MediaPortal Skin: Xfade
Windows Version: Windows 7 32Bit
CPU Type: Intel E2180 2GHz DualC.
HDD...
Similar to this thread, but the dll offered therein doesn't fix the problem.
All mkvs that have subtitles (or marked closed captioned) do not play. All other ones play with no issue.
Screen doesn't change on fail. Can press stop and continue with MP as normal.
Any fix or setting to change?
Similar to this thread, but the dll offered therein doesn't fix the problem.
All mkvs that have subtitles (or marked closed...
Similar to this thread, but the dll offered therein doesn't fix the problem.
All mkvs that have subtitles (or marked closed...
Hi Spooky, I'm using Panasonic PT-AE3000 projector.
It seems to me that no matter output RGB or YCrCb, it will always be converted to RGB first inside the graphics card. The luma expansion and chroma upscale are both carried out when during this stage, and this causes low PQ IMO.
I actually set pixel forma to RGB to avoid another...
Hi Spooky, I'm using Panasonic PT-AE3000 projector.
It seems to me that no matter output RGB or YCrCb, it will always be converted...
Hi,
Is there a recommanded settings of LAVF that works best with ATI graphics card?
The EVR renderer does a pretty bad job...
There is a equivalent here called SAF6, unlocked version supplies PDVD filters.
I used shark007 pack for a couple of years nd they were very good on XP and Vista, but since Windows 7 and the Lav filters became available, i just use those now and they meet all my needs.
There is a equivalent here called SAF6, unlocked version supplies PDVD filters.
I used shark007 pack for a couple of years nd...
Im not trying to sell you any codecspackage here. My question is for those who use shark007 codecs - How do they work out for you...
Hi ... I increased the number of virtual drives in virtualclonedrive to a larger number than 1 and the issue went away. You do that in the settings for VirtualCloneDrive.
Hi ... I increased the number of virtual drives in virtualclonedrive to a larger number than 1 and the issue went away. You do that...
Hi all,
I would be so grateful of any help...
I have run this set-up for over a year and all has been ok. I recently changed from...