General Support (149 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
Thanks. Still no direct response from my contact so I've now submitted a ticket. :)
Thanks. Still no direct response from my contact so I've now submitted a ticket. :)
Some channels won't display (seems to tune, but can't find audio/video) with MP, but DO tune/display with WMC The attached log...
Replies
22
Views
5K
Still: Did you ever install a custom/test version of MP? Your Windows application event logs is showing errors: "2014-07-12 14:24:45";".NET Runtime";"(0)";"Error";"Tillämpningsprogram: MediaPortal.exe Framework-version: v4.0.30319 Beskrivning: Processen avslutades på grund av ett ohanterat undantag. Undantagsinformation...
Still: Did you ever install a custom/test version of MP? Your Windows application event logs is showing errors: "2014-07-12...
Just upgraded 1.7.1. hotfix to 1.8.0. final and now I can't start MP (nothing happens when I double click the icon, simple as...
Replies
3
Views
2K
Hi Every one, before upgrade any scheduled recording was in red in the tv guide. now i only see the red dot on the right side of it. is this by design or is it just me? I use the default wide skin. also tested titan and it is the same.
Hi Every one, before upgrade any scheduled recording was in red in the tv guide. now i only see the red dot on the right side of...
Hi Every one, before upgrade any scheduled recording was in red in the tv guide. now i only see the red dot on the right side of...
Replies
0
Views
638
MP1 MP2 Audio Issue DE
Hi guys I hope someone can help me squash a little bug (n) When I go from playing music to watching a TV series or a movie i have no sound! In the case of TV series if I stop the episode and go to play it again it sops straight away and skips to the next episode showing the previous one as watched. If I restart MP all is fine...
Hi guys I hope someone can help me squash a little bug (n) When I go from playing music to watching a TV series or a movie i have...
Hi guys I hope someone can help me squash a little bug (n) When I go from playing music to watching a TV series or a movie i have...
Replies
0
Views
639
Yes, at 19:28 an episode of Master Chef started to be watched (sorry, yes, that was playing at the time of the incident - was not playing in the morning incident), then in the Recorded TV we were trying to select a different episode. After I kill the process and restart I then log in to the machine on RDP to kick off the debug zip...
Yes, at 19:28 an episode of Master Chef started to be watched (sorry, yes, that was playing at the time of the incident - was not...
At seemingly random times of the day the Client freezes - not responding to any input. Process has to be killed and restarted...
Replies
5
Views
2K
I've never tried a ramdisk, just use a dedicated 2TB WD "green drive" for recordings and timeshift with up to 5 simultaneous recordings and watching 1 program. I figure there is not a big difference between disk WR/RD activity for recordings/watching and using the same drive, same type of traffic for timeshifting. Have you looked at...
I've never tried a ramdisk, just use a dedicated 2TB WD "green drive" for recordings and timeshift with up to 5 simultaneous...
Hi Multiseat MediaPortal 1.8 with DVB-C through 50 mbit fibrebox with COAX output from router (IP-TV -> DVB-C). No matter what I...
Replies
8
Views
1K
Thanks Homey. So I got up this morning and turned on mediaportal. It started with out a problem. I was doing other things aroudn the house and then 5-10 minutes after starting, came back. I navagated using the arrow keys on my remote (left arrow 5-6 times) and that is when it crashed. I tried looking in the logs but only came up...
Thanks Homey. So I got up this morning and turned on mediaportal. It started with out a problem. I was doing other things aroudn...
Hello everyone, I have been playing mediaportal and using the pandora plugin with stream skin and I am getting a lot of crashes...
Replies
8
Views
1K
Perfect, exactly what I was looking for. Cheers.
Perfect, exactly what I was looking for. Cheers.
Hi, is there a way to continue to show live TV full screen in the background while viewing the full EPG, using 1.8? Cheers.
Replies
2
Views
1K
I´m on release 1.8 and i have got the same issues.
I´m on release 1.8 and i have got the same issues.
Since MP 1.6 i have the problem that MP freezes after standby. Meanwhile, I have 1.7.1 and still remains the same problem, every...
Replies
7
Views
1K
I have already tested a lower quality. When I play movies via UPnP, I have no problems with playback. Is there a tutorial how i use and set up Web MediaPortal? Do I need a DynDNS? My Router is unable to handle it. :( janemann
I have already tested a lower quality. When I play movies via UPnP, I have no problems with playback. Is there a tutorial how i use...
Hello, I want to stream my videos on my PC with ampdroid to my handy. I select the stream Quality "HTTP Live streaming medium"...
Replies
2
Views
848
Here is an update on this issue. I uninstalled MP1.8. I then installed MP1.7 and upgraded to 1.8. This did'nt not work either. I ended up with reinstalling windows 8.1 and after installing mp1.8 everything worked fine. I have no qlue of what whent wrong the first time /Teeo
Here is an update on this issue. I uninstalled MP1.8. I then installed MP1.7 and upgraded to 1.8. This did'nt not work either. I...
Hello! I did a new W8.1 installation (new bigger hd) and with it a new MP1.8 installation (did have a working MP1.8 before hd...
Replies
3
Views
1K
Oh wow I have my own beautiful installer! The last error - fatal error LNK1123: failure during conversion to COFF - required VS2010 SP1 to be installed. After that, the NSIS script compiled successfully. Now all I have to do is actually do something!
Oh wow I have my own beautiful installer! The last error - fatal error LNK1123: failure during conversion to COFF - required...
Hi, Still stumbling around. Thought I was getting somewhere - I'm really just trying to compile and build MP 1.8.0 as a starting...
Replies
10
Views
2K
Hi Since version 1.6, I have a problem with my Irtrans remote. When the system wakes up for a recording, audio and video is muted. That's okay so far. But I can't enable it with my Irtrans remote anymore. I have to press a key on the keyboard to enable display and audio. That was not the case with the previous 1.2.3 installation. I...
Hi Since version 1.6, I have a problem with my Irtrans remote. When the system wakes up for a recording, audio and video is...
Hi Since version 1.6, I have a problem with my Irtrans remote. When the system wakes up for a recording, audio and video is...
Replies
0
Views
866
@regeszter: running those commands manually has fixed it. Thank you :) @seco: Record counts in my system are as follows: canceledschedule 2 card 11 cardgroup 0 cardgroupmap 0 channel 2075 channelgroup 4 channellinkagemap 0 channelmap 2881 conflict 0 diseqcmotor 0 favorite 0 groupmap 1827 history 1616 keyword 0 keywordmap 0...
@regeszter: running those commands manually has fixed it. Thank you :) @seco: Record counts in my system are as follows...
After updating to 1.8.0 final I can't run TVServer Config. It gives an error "failed to update database". The TV Server itself...
Replies
9
Views
2K
Popped an improvement request here; https://forum.team-mediaportal.com/threads/bulk-delete-tv-recordings.126645/
Popped an improvement request here; https://forum.team-mediaportal.com/threads/bulk-delete-tv-recordings.126645/
Been using MP for a while now but there are a couple of tasks that I cannot figure out how to do. I'm on MP 1.6 with ArgusTV back...
Replies
3
Views
961
you nailed it thanks mm !
you nailed it thanks mm !
Update from 1.7.1 hotfix to 1.8 FINAL on my SingleSeat and everything went well. On client side, MP hangs after update from 1.7.1...
Replies
2
Views
1K
Thank you for all the help. I will mark this topic as closed.
Thank you for all the help. I will mark this topic as closed.
Hi, Like I mentioned in the release thread: https://forum.team-mediaportal.com/threads/mediaportal-1-8-0-final.126618/#post-1088964...
Replies
22
Views
5K
OK so I'll try having both the Timeshift and Recording folders on the HDD. Does anyone have any comment on whether an i5-4440 will be sufficient for video transcoding? I know that my Celeron G1610 isn't quite good enough for the transcoding options in MPExtended, so I'm hoping that having an extra two cores and a higher clock speed...
OK so I'll try having both the Timeshift and Recording folders on the HDD. Does anyone have any comment on whether an i5-4440 will...
I currently have two PCs in my home entertainment setup: Home Digital Assistant Intel Celeron G1610 (Ivy Bridge @ 2.6 GHz) 60 GB...
Replies
6
Views
2K
No clue, maybe a hiccup in the update/install for afc2007, since lazlong fixed his issue by upgrading to 1.7.1 HotFix.
No clue, maybe a hiccup in the update/install for afc2007, since lazlong fixed his issue by upgrading to 1.7.1 HotFix.
I recently upgraded from 1.6 direct to 1.7.1 hotfix. I have a regular computer screen plugged to HTPC via DVI, then HDMI out to a...
Replies
7
Views
2K
This is great, but for me the AC3 audio on BBC 1 HD is noticably quieter than all other channels. Is there a way of boosting the volume by default?
This is great, but for me the AC3 audio on BBC 1 HD is noticably quieter than all other channels. Is there a way of boosting the...
TV-Server Version: 1.0 MediaPortal Version: 1.0 Hi Everyone, I have a question about different audio streams being broadcast...
Replies
7
Views
6K
To be clear: video support should already work fine with LAV. TV support is a different story.
To be clear: video support should already work fine with LAV. TV support is a different story.
Hi all, I have just built my first 4K capable HTPC with Intel's D54250WYK NUC with HD 5000 graphics. Armed with my first handful...
Replies
4
Views
6K
1: Yes it was Windows 8/.1 and the way they did their crap USB3 Hub driver etc. Which they did not fix in 8, 8.1 or 8.1 Update 1. Slack pricks! 2: Do not try the method above on Windows 8.1 as it will screw your all your USB ports and you will have to use repair mode to do a restore point :( lol 3: Re did the system (sigh so time...
1: Yes it was Windows 8/.1 and the way they did their crap USB3 Hub driver etc. Which they did not fix in 8, 8.1 or 8.1 Update 1...
First time poster here. Has anyone has issues with Mediaportal TVserver and their USB Tuners? Windows 8.1 picks them up and...
Replies
7
Views
3K
It's a pain in the ass to configure the whole thing, but it works really nice. You can setup more profiles. One for Media portal and one for steam by example
It's a pain in the ass to configure the whole thing, but it works really nice. You can setup more profiles. One for Media portal...
Are XInput gamepads supposed to work out of the box with MP? My Logitech F710 apparently isn't.
Replies
4
Views
1K
That's great! Thanks so much for pursuing this. Really appreciate the help!
That's great! Thanks so much for pursuing this. Really appreciate the help!
I just installed MP 1.7.1 on a new WIN 7 32 bit machine. When I am playing back recorded TV and press the skip forward (15...
Replies
26
Views
4K
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/Troubleshooting/TV/Repairing_database_(MySQL) If you are using MySQL 5.6 the default path is: cd C:\Program Files\MySQL\MySQL Server 5.6\bin
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/Troubleshooting/TV/Repairing_database_(MySQL) If you are using MySQL...
I have had a look through the forum and see similar type issues,but not the same. I installed 1.7.1 onto my Window 7 32bit...
Replies
7
Views
1K
I messed up last night. Started "Record Now" to record a program I had forgotten to put on my recordings list, and forgot that I had done so. Watched several other programs that were recorded, then went to bed. Today when I went to "Recorded Programs" MediaPortal locked up and I had to ctrl-alt-delete to kill it and after rebooting...
I messed up last night. Started "Record Now" to record a program I had forgotten to put on my recordings list, and forgot that I...
I messed up last night. Started "Record Now" to record a program I had forgotten to put on my recordings list, and forgot that I...
Replies
0
Views
708
Just a follow-up email to anyone else who may come across this thread and find it useful. Based on Sebastii's advice (above post) I added a 10 sec delay setting upon the MP Client resume and all the problems went away! I did have a 5 sec delay already set, but obviously this wasn't long enough for my system. My Sony TV is listed in...
Just a follow-up email to anyone else who may come across this thread and find it useful. Based on Sebastii's advice (above post) I...
I am having a problem with MP resuming from sleep properly. I have read the other threads regarding this but have not been able to...
Replies
3
Views
1K
Bingo. I cured the problem with an entry in the hosts file on each client machine. Interesting, because nothing else has trouble resolving the address. No matter - it works now. Thanks heaps!
Bingo. I cured the problem with an entry in the hosts file on each client machine. Interesting, because nothing else has trouble...
I'm trying to stream TV (live and recorded) from my server to my laptop. I did a new installation of MP on my laptop and in the...
Replies
5
Views
2K
Do you see the browser window open? Have you filled in your 4od credentials in the site setup? I think you have to do this from OV's configuration. If you haven't got a 4od account you need to create one at their site.
Do you see the browser window open? Have you filled in your 4od credentials in the site setup? I think you have to do this from...
Trying to watch The Widdower on ITV Player via Online Videos - latest build. Its crashed numerous times, cant figure out why...
Replies
18
Views
3K
Now that's a sneaky one, glad you solved it - that's one that could have circled for long long time otherwise(y) TTFN - JCMP
Now that's a sneaky one, glad you solved it - that's one that could have circled for long long time otherwise(y) TTFN - JCMP
I have installed MediaPortal 1.7.1 on a Core2Duo computer here with Windows7 x64. I have enabled Scheduler in the server of...
Replies
6
Views
1K
Top Bottom