General talk regarding our HTPC-software MediaPortal 1 takes place here.
I have a similar question.
I would prefer not to PIN my movie files, rather, dedicate a simple client in the grandkids playroom to JUST play the age appropriate movies. The main client in the living room would have parental consent required to operate at all. Is there a way to dictate, within "MediaPortal Configuration" on the kid...
I have a similar question.
I would prefer not to PIN my movie files, rather, dedicate a simple client in the grandkids playroom...
Maybe it's something I'm overlooking.
I can set the movie rating in the database for each movie but I can't seem to find where I...
Is there a keyboard shortcut for mymusic and mymovies and tv. Then I can teach my remote if i dont get it it to work as a mce remote
Is there a keyboard shortcut for mymusic and mymovies and tv. Then I can teach my remote if i dont get it it to work as a mce remote
Is there a plugin or something I can use to make my Logitech 525 go directly to mymusic and myvideo when I press these buttons...
There is no more need for downloading. TVE3 distro contains now a new DVBC file with the same entries.
Scanning with this file gives me the following results:
- 100 radio channels found
- 155 tv channels found
- all HD channels are playing (HDTV package)
My setup: FloppyDTV and PowerDVD h.264 codec
There is no more need for downloading. TVE3 distro contains now a new DVBC file with the same entries.
Scanning with this file...
I just created a new The Netherlands-casema-2008.dvbc reflecting the last channel changes. Perhaps somebody can add this to the...
I have found the solution by myself.
After installing the xface skin I have no more troublers.
I have found the solution by myself.
After installing the xface skin I have no more troublers.
I have update My Dreambox TV plugin to version 0.4.1.
In the configuration I have recieved all the bouquets.
When I started...
Such feature isn't possible with MP1 (or it would require a quite huge changes in the skinning engine). So better to wait for MPII.
Such feature isn't possible with MP1 (or it would require a quite huge changes in the skinning engine). So better to wait for MPII.
Hello,
i was wondering if there's any way in mediaportal to auto-switch the display's hertz by the media source fps? By example...
did you disable user account control before installing/configuring
I had this problem with my card
1. Launch MSCONFIG by from the Run menu.
2. Click on the Tools tab. Scroll down till you find "Disable UAP" (this should probably change to UAC in next Vista beta builds and in the RTM version). Click on that line...
did you disable user account control before installing/configuring
I had this problem with my card
1. Launch MSCONFIG...
hi guys!
could anybody help me in setting up media portal with vista business!
It has been installed successfully but there are...
I'll try it tomorrow, never done it personally, there's always a first :)
I'll try it tomorrow, never done it personally, there's always a first :)
Hi guys
I cant find the key in mce remote to use to enter movie info page,
if I use the F3 key I get the page but how can I...
Yes the SQL server does take as much as it gets but it will free it up as the systems needs it. So no need to limit the amount.
Yes the SQL server does take as much as it gets but it will free it up as the systems needs it. So no need to limit the amount.
Hi,
I think I have a problem with my SQL-server.
1. It uses 900MB RAM! Is this normal??
2. Data gets overrided!
example...
Probleam solved
It's not enough to disable UAC during plugin installation, but you must reinstall MP with UAC disabled if it was installed with UAC enabled.
So UAC is causing this problem.
Probleam solved
It's not enough to disable UAC during plugin installation, but you must reinstall MP with UAC disabled if it was...
Hello,
I have a really strange problem that I'm not able to sort out.
I also searched on the fourm but I don't found similar...
I couldn't open your graph though.. if you read my previous post about the "&a mp" see the space.. verify that that space is removed in your config. Something about the forum board or the explorer puts the space there.
You should also check the revision inside of graphedit in the end of the line "&rev_d0"
I hope that is...
I couldn't open your graph though.. if you read my previous post about the "&a mp" see the space.. verify that that space is...
The PCTV 310i card has had a lot of problems being found by Media Portal
I've fought with the card and MP since I bought the...
I just have to add the LNB setting is not something you suppose to guess. You can read your LNB frequencies from the LNB itself.
As it was old Foxtel installation the LNB can be single, not universal and frquency might be 10600 or 10700.
Anyway, the best thing you can do for yourself is to check the actual LNB spec you are dealing with.
I just have to add the LNB setting is not something you suppose to guess. You can read your LNB frequencies from the LNB itself...
Hi Guys
i have a firedtv dvb-s card.. an i cannot get it to lock or find any signal in TVE3
has anyone got any settings they...
Is anyone working on a process/plugin to keep all client databases syncrohnised. I was thinking of writing something that would store all the info in the TVE3 SQL database and then the clients would get updates from that instead of each client updating from the internet all the time.
The way I was thinking was, One client would be...
Is anyone working on a process/plugin to keep all client databases syncrohnised. I was thinking of writing something that would...
Is anyone working on a process/plugin to keep all client databases syncrohnised. I was thinking of writing something that would...
From the TV side, YES MP can stream the same channel to multiple clients at the same time (there may be a slight difference between each client (1 second or so). Note that each client must select this channel and only one TV card will be used. The server as far as I am aware, can not force the clients to switch the that channel.
As...
From the TV side, YES MP can stream the same channel to multiple clients at the same time (there may be a slight difference between...
I am new to MP. I had tried for several months to get a Myth box working..... don't know enough LINUX I guess. I then tried GB-PVR...
i'll search the internet for info about it, it comes over FTA, i dont subscribe to top up tv but the boxes get the data so its being broadcast to all. So far theres a couple of neat things about the top up tv box but the WAF prefers the mediaportal at the moment :) which means the topup tv box could be going back and i'll have more...
i'll search the internet for info about it, it comes over FTA, i dont subscribe to top up tv but the boxes get the data so its...
my topup tv box downloads series link information, are there any plans for MP to extract this info and use it? aparently its...
You could have two capture cards that have twin analogue tuners each such as http://www.newegg.com/Product/Product.aspx?Item=N82E16815116628
that would take up two PCI slots in your server. That would allow you to have up to 4 set top boxes connected with 4 streams at once.
Then you can have small HTPC clients at each tv and...
You could have two capture cards that have twin analogue tuners each such as...
Hey guys, I'm fairly new to tv capturing and tuning, I've been trying to do a lot of research though. Are my conclusions based on...
Does a keyboards up\down work, if so uninstall ehome receiver under device manager, unplug receiver, reboot and then plug back in, should reinstall itself.
If changing batteries, leave them out for 20 minutes prior to fitting new.
Does a keyboards up\down work, if so uninstall ehome receiver under device manager, unplug receiver, reboot and then plug back in...
Hi
I installed MP on Windows Vista,
But the Microsoft Remote control doesn't work even though i configured it in the configuration...
Read this thread
https://forum.team-mediaportal.com/change_channel_channelnumber_sid_w_code-t25614.html?t=25614&highlight=sql+channel+number
Channel entry works from the guide screen after this, but as the end of the above thread says, channel entry from fullscreen TV won't work unless a dev picks up the code from the last...
Read this thread...
I'm using media portal as my main device on my AV system...my config is only HTPC , HD TV and receiver with speakers....so far for...
- Poll
Thanks for shedding light on the two TV Engines
Thank you for the comparison. I must say I did not realize the power of TV Server over TV that comes with MP 0.2.3.0! Once I receive my new Pinnacle DVB-T Dual I will be installing the Server TV Engine. Thanks for the work for those of us did not consider comparing the two engines....
Thanks for shedding light on the two TV Engines
Thank you for the comparison. I must say I did not realize the power of TV...
The question is: Do you use MyTV in MediaPortal? And if yes, how do you use it?
note by infinityloop:
most ppl have been...
I use it because i can record in mpg format instead of dvr-ms..
Heres a link to a page that shows the differences.. http://wiki.team-mediaportal.com/TV-Engine_0.3/overview
I use it because i can record in mpg format instead of dvr-ms..
Heres a link to a page that shows the differences...
Sorry to ask such a simple question but I am trying to understand the benefits of using TVEngine&MP (single seat) over MP on its...
I guess using HW accelerated analogue cards is the real way to go, why use expensive CPU if a relativly cheap encoder can be used?
I guess using HW accelerated analogue cards is the real way to go, why use expensive CPU if a relativly cheap encoder can be used?
Hi Guy's :)
just a quick question, does anyone know what the limitation would be with tvserver and number of connected clients...
Is there anyway I could fast forward to like half way through a track when using the winamp plugin?
Is there anyway I could fast forward to like half way through a track when using the winamp plugin?
Is there anyway I could fast forward to like half way through a track when using the winamp plugin?
I have a question about how TV server handles Radio, is it able to share the radio off of the tv card and send it out to the clients like the TV? I tried searching through the wiki documents and forums but haven't found anything reguarding this.
I am only asking because I havn't purchased any equpiment yet as I want to make sure...
I have a question about how TV server handles Radio, is it able to share the radio off of the tv card and send it out to the...
I have a question about how TV server handles Radio, is it able to share the radio off of the tv card and send it out to the...
Delete the contents of the cached folder.
c\program files\team-mediaportal\mediaportal\cached or Vista c\program data\team-mediaportal\mediaportal\cached
Delete the contents of the cached folder.
c\program files\team-mediaportal\mediaportal\cached or Vista c\program...
I made a picture called folder.jpg , and it displayed as supposed.
However i changed the picture ( same name) , and it still...
Problem so far repaired, which I had stopped in such a way the TV server, which does not go to these into the hybernate mode, as long as the service is more sqlbrowser started. This is started over the Client by batch file with to start by MP on the server, and with MP terminate again terminated. The Diest more sqlbrowser is not...
Problem so far repaired, which I had stopped in such a way the TV server, which does not go to these into the hybernate mode, as...
Hello,
my English is not very good.
How one can adjust the Media portal server or MediaPortal Client in such a way, which...
thx, but a screenshot would more help. but i will read it and i hope it can help.
other problem with ffdshow, if i use the zoom-mode, i see small stripes in the pictures, is that normal ?
thx, but a screenshot would more help. but i will read it and i hope it can help.
other problem with ffdshow, if i use the...
hello,
can anyone tell me, what are the best video-settings for ffdshow? i use a 16:9 TV with 1280x720 point. problem is, i have...
Great news on MPII :D
And thanks for the hint, should've found that myself :(
Great news on MPII :D
And thanks for the hint, should've found that myself :(
Evening,
I've found a handfull of plugins I really enjoy and try to keep up to date, aswell as a few skins I prefer.
What's...
Yeah all we'd need after this is mkv plugins to autoconvert after record is done, and its a WINNAR!!!
Anyone have anything new on this? specs maybe, I'm still looking and hope to updated here as we get closer to release. stay tuned
Yeah all we'd need after this is mkv plugins to autoconvert after record is done, and its a WINNAR!!!
Anyone have anything new on...
http://www.ehomeupgrade.com/entry/4604/hauppauge_demonstrates_new
If we could get support for this baby....we'd be all set, HD...
I think there may be i'll take a look. thanks
i cant seem to find it. i'm looking for one to play the video clips on my computer though.
I think there may be i'll take a look. thanks
i cant seem to find it. i'm looking for one to play the video clips on my computer...
I was Wondering if any one who has experience in writing a plugin could write a "My Video Clips" Plugin for all those random mini...
Go to your graphics card properties and set the out put to tv or which ever port you want.
Go to your graphics card properties and set the out put to tv or which ever port you want.
Hi!
My problem is not actually mediaportal related but I thought to give a try because someone here probably knows the answer :)...
Hi,
is it possible to change a entry in my basic home screen, that i can start a windows programm?
i want change reboot and shutdown (i mean the entry if i push the OFF Button), both shall start a *.exe.
Hi,
is it possible to change a entry in my basic home screen, that i can start a windows programm?
i want change reboot and...
Hi,
is it possible to change a entry in my basic home screen, that i can start a windows programm?
i want change reboot and...