Problems with the TV-Server or MyTV frontend? Post them in here.
Thanks for clarification.
I'm still confused but on a higher level now.
:D
Thanks for clarification.
I'm still confused but on a higher level now.
:D
Seems that there are now two places where you can set identical properties for the TVPlugin.
1.) Under the TV section on the...
That is correct, I've been using it for a couple months now. Make sure you use the latest driver from the silicondust site. Jafa updated it a month or so ago, he changed how the driver defined something, so that the TV Engine finds the card.
It works great. Get the driver here...
That is correct, I've been using it for a couple months now. Make sure you use the latest driver from the silicondust site. Jafa...
http://www.oshinetworks.com/HDHomeRun/TvBusinessLayer.zip
Replace the TvBusinessLayer.dll in the TVServer directory with the one...
I have now a very quick channel change without the last second framt the last channel :D :D :D, but i do not see any frames if i rewind a recorded or a timeshift tv show... (!)
I have tryed the MS MPG2 Codec, MPV, Cyberlink 7.3 and the ATI MPEG Codec without success.
How can i rewind and fast forward and see the the frames from...
I have now a very quick channel change without the last second framt the last channel :D :D :D, but i do not see any frames if i...
Hi, after changing a channel always the last second (or 2 seconds) from timeshiftbuffer is displayed before new channel is...
Hi,
Seems that after standby my Floppy DTV-S2 doesn't work anymore, my Terratec 2400DT will work and I can view the channels that are on the DVB-T network. If I try and select a DVB-S channel I will get a "unknown error occured" message and the only way to fix it is to restart the PC.
What is strange though is that sometimes...
Hi,
Seems that after standby my Floppy DTV-S2 doesn't work anymore, my Terratec 2400DT will work and I can view the channels...
Hi,
Seems that after standby my Floppy DTV-S2 doesn't work anymore, my Terratec 2400DT will work and I can view the channels...
Hi Hans,
I checked your suggestion and I had the same issue. For some reason MP has two IP's listed for my PC. One is a rubbish IP (0.1.0.4 or something). I changed it to the correct IP and that fixed part of my errors.
The client still could not play recorded TV or live TV, but when I used system restore to return to a previous...
Hi Hans,
I checked your suggestion and I had the same issue. For some reason MP has two IP's listed for my PC. One is a rubbish...
TV-Server Version: 0.3
MediaPortal Version: 0.2.3RC2
MediaPortal Skin: Wide blue
Windows Version: MCE 2005
CPU Type: Athlon X64...
After looking into it a bit more, i notice that the DVB-S settings dialog in the TVserver does not have an option to enter PMT PID and PCR PID like the built in TVengine does.
If i export the channel(s) to XML, change those id's from -1 to the correct values, and then import the channel back, it works!
Are these values supposed to...
After looking into it a bit more, i notice that the DVB-S settings dialog in the TVserver does not have an option to enter PMT PID...
TV-Server Version: tvengine3-10-16-2007--01-24h--Rev16239
MediaPortal Version: RC2
MediaPortal Skin:
Windows Version: xp SP2...
This is now working properly, thanks to you guys who fixed it :thx: :thx: :thx: :thx: :thx: :thx: :thx: :thx:
This is now working properly, thanks to you guys who fixed it :thx: :thx: :thx: :thx: :thx: :thx: :thx: :thx:
Is it possible to change the audio stream on the client pc's?
I'm watching Toon Disney now on the master and on a client at the...
This is now working properly, thanks to you guys who fixed it :thx: :thx: :thx: :thx: :thx: :thx: :thx: :thx:
This is now working properly, thanks to you guys who fixed it :thx: :thx: :thx: :thx: :thx: :thx: :thx: :thx:
Hi,
it is not possible to change the audio track in myTV! It doesn't matter what I select I have only the first track.
OK, now I have managed to get CoreAVC as the codec used when watching SVT HD, by changing the DirectShow Control merit in ffdshow from default to preferred. However, the HD stream still doesn't play well. I get only about half of the picture. It looks as if it id enlarged and runs outside of the right and lower borders of the screen...
OK, now I have managed to get CoreAVC as the codec used when watching SVT HD, by changing the DirectShow Control merit in ffdshow...
TV-Server Version: Rev15769
MediaPortal Version: 0.2.3 RC2
MediaPortal Skin: BlueTwo Wide
Windows Version: XP Home SP2
CPU...
Hi shacknasty
How did you configure the streaming? Was it a problem on the server or client?
I experience the same problem as you.
T
Hi shacknasty
How did you configure the streaming? Was it a problem on the server or client?
I experience the same problem as you.
T
TV-Server Version: Rev15780
MediaPortal Version: Rev15757
Windows Version: xp sp2
1. TV Card: skystar 2
1. TV Card Type: dvb-s
2...
In the German part of the forum, there was someone who was using one card with the BDA drivers and one with the WDM drivers. But if I remember correctly it is a little bit complicated, because it isn't standard case.
The WDM drivers support DiseqC and should support more than one card. I think the limit was 4 cards, but it could be...
In the German part of the forum, there was someone who was using one card with the BDA drivers and one with the WDM drivers. But if...
Hi there,
I got a SkyStar2 with the newest BDA beta driver, latest MediPortal RC and latest TV Server Engine V3. I installed the...
The tuner driver has not started correctly, prior to the TVServer connecting to it, strangely no error shown here.
As you state, if you stop tvservice and then restart it connects correctly, i am having this problem with both powerscheduler and pvrscheduler, frustrating because it works fine 100% in vista mce.
The tuner driver has not started correctly, prior to the TVServer connecting to it, strangely no error shown here.
As you state...
TV-Server Version: latest SVN
MediaPortal Version: 0.2.3.0 RC2 + SVNs
MediaPortal Skin: Foofaraw
Windows Version: Windows XP SP2...
good job.
//Lasse
good job.
//Lasse
Hi
I just bought another dvb-t card and I set the old one to Prio ONE in TVE3. When I schedule a recording the service always...
EPG problem
Have the same problem - though mine have been working, but now has stopped working.
Also using XmlTv2 and get this error in the log :
15-10-2007 21:18:12 16 plugin:xmltv import failed
15-10-2007 21:18:12 16 Exception :System.FormatException: Input string was not in a correct format.
at...
EPG problem
Have the same problem - though mine have been working, but now has stopped working.
Also using XmlTv2 and get this...
[TV-Server Version: TVE3
MediaPortal Version: 0.2.3.0 RC2
MediaPortal Skin: XFACE
Windows Version: MCE 2005
CPU Type: Intel...
North American Satelite scan problem
Hello,
Another question... I have a problem with my MP tvserver3 and North america satellite scan. My MP and TVServer are correctly installed and seems to work. So, in the TvServer setup, I configured my single LNB with no switch. I have some signal..good. But wwhen I want to scan channel...
North American Satelite scan problem
Hello,
Another question... I have a problem with my MP tvserver3 and North america...
I just want post how I get bev scanning correctly , so much easy you will not beleive it. ( I simply used mytheatre Ku-fin...
North American Sattelite scan problem
Hello,
I have a problem with my MP tvserver3 and North america satellite scan. My MP and TVServer are correctly installed and seems to work. So, in the TvServer setup, I configured my single LNB with no switch. I have some signal..good. But wwhen I want to scan channel, tvserver has found...
North American Sattelite scan problem
Hello,
I have a problem with my MP tvserver3 and North america satellite scan. My MP and...
Hi, in MediaPortal 0.2.2.0 there was a way to set the LOF1, LOFSwitch and LOF2 settings in the tuning parameters. Is there a way...
Hello,
I have a problem with my MP tvserver3 and North america satellite scan. My MP and TVServer are correctly installed and seems to work. So, in the TvServer setup, I configured my single LNB with no switch. I have some signal..good. But wwhen I want to scan channel, tvserver has found 14 channel on the first transponder...
Hello,
I have a problem with my MP tvserver3 and North america satellite scan. My MP and TVServer are correctly installed and...
Hello,
I have a problem with my MP tvserver3 and North america satellite scan. My MP and TVServer are correctly installed and...
fixed.... by deleting existing groups in MP-Client, and adding Radio Group to Server config.
All channels show up properly.
cheers
joystick
fixed.... by deleting existing groups in MP-Client, and adding Radio Group to Server config.
All channels show up properly...
TV-Server Version: TVE3 RC2 (10.10.07)
MediaPortal Version: 0.2.3.RC2 (10.10.07)
MediaPortal Skin: Foofaraw 16:9 1.07
Windows...
***pushup***
***pushup***
TV-Server Version: TVE3 RC2
MediaPortal Version: 0.2.3.RC2
MediaPortal Skin: Foofaraw 16:9 1.07
Windows Version: WinXP SP2
CPU...
You can add this in the table Recordings on the SQL database, check what is entered for a still having new record and enter your old recordings on the same way manually there.
this should work.
MoPhat
You can add this in the table Recordings on the SQL database, check what is entered for a still having new record and enter your...
Hey There
Not sure if this is the right place to ask a question about TV-Server
I have Changed from normal Mediaportal...
Thanks Paranoid, but don´t worry... I have only installed a one antivirus.
This afternoon I´ve tested NOD32 and I can start tvservice with windows boot.
I take your advice with winpatrol
Thanks a lot and good luck
Cheers
Thanks Paranoid, but don´t worry... I have only installed a one antivirus.
This afternoon I´ve tested NOD32 and I can start...
TV-Server Version: 3 svn16098
MediaPortal Version: 02.3.0RC2 svn16098
MediaPortal Skin: BlueTwo Wide
Windows Version: XP Pro SP2...
Is it possible to get subtitles in mediaportal without using TVE3? I saw the thread about "testning new filter" but that solution seems to need TVE3.
Subtitles im talking about is for tv-channels.
For now im using MP 0.2.3RC2. Channels and EPG works its just subtitles im missing.
Oops! Posted in wrong "section". Plz delete...
Is it possible to get subtitles in mediaportal without using TVE3? I saw the thread about "testning new filter" but that solution...
Is it possible to get subtitles in mediaportal without using TVE3? I saw the thread about "testning new filter" but that solution...
I have the same problem here. Could anyone please explain what it the priority between "channel number" and frequency? Or alternatively how to translate channel number s12 e.g. to the number that has to be entered in the config?
Much appreciated! Thanks!
I have the same problem here. Could anyone please explain what it the priority between "channel number" and frequency? Or...
Hey
I am trying to manually add the channels for danish cable tv - using the official frequencies provided by danish cable tv...
Yes the signal is fine, the same problem comes from 2 different sources (DVB T and S) and only has appeared recently.
Yes the signal is fine, the same problem comes from 2 different sources (DVB T and S) and only has appeared recently.
Ok this is a silent video but you get the idea, not all channel changes are this bad but 50% of the time it is.
Happens on...
On mine when I hit the volume up and down on my TV remote Media Portal starts doing forward or reverse skips in the video I'm watching. Funny thing is the Hauppauge remote has no effect on the TV no matter what button I push....
On mine when I hit the volume up and down on my TV remote Media Portal starts doing forward or reverse skips in the video I'm...
Since a month or so ago when I started to update MP with newer SVN's I've been hit with the following problem;
Whilst pressing...
I have an EMP switch 9 In 4 out. These are the settings I used in mytheatre, and they worked perfectly.
SW: 12200000 <-- 22KHz ON
SW: 12700000 <-- 22KHz OFF
Nimiq 1 - Commited LNB 1 LOF = 11250000 SW= 12200000 LOF2 = 11250000
Nimiq 2 - Commited LNB 1 LOF = 11250000 SW= 12700000 LOF2 = 11250000
Echostar 7 - Commited LNB 2...
I have an EMP switch 9 In 4 out. These are the settings I used in mytheatre, and they worked perfectly.
SW: 12200000 <-- 22KHz...
I have an EMP switch 9 In 4 out. These are the settings I used in mytheatre, and they worked perfectly.
SW: 12200000 <-- 22KHz...
If the devs need more information, you can find them in the bugreport thread: https://forum.team-mediaportal.com/hybrid_card_unknown_channel-t23721p2.html
There other users have tested the patch succesfully and I also explained the reason for these problems. The reason is as Pretoriano guessed something like a timing problem. The...
If the devs need more information, you can find them in the bugreport thread...
TV-Server Version: TV-Server 0.3 rev.16108
MediaPortal Version:MediaPortal v0.2.3.0-RC2 rev.16108
MediaPortal Skin:Blue Two Wide...
Hi all,
I ran into a problem (unfortunately I am not yet able to provide logs, but maybe you can check if this happens at your system aswell)
When stoping a divx File, that was played out of MyVideos, MP freezes.
Like I said, I will provide logs later on.
cheers
joystick
btw: is there a better thread for posting the...
Hi all,
I ran into a problem (unfortunately I am not yet able to provide logs, but maybe you can check if this happens at your...
Hi,
I have this issue sine the last two svn versions.
I just installed the actual svn from today, and still have no sound when...
I am seing the exact same problem on Vista with SQLServer Express 2005 SP2.
I tried uninstalling and then removing the TV Server directory completely as well as the database but still no database settings dialog. I have the right configuration of SQL Server and prior to the upgrade to a later TV server build everything was working...
I am seing the exact same problem on Vista with SQLServer Express 2005 SP2.
I tried uninstalling and then removing the TV Server...
TV-Server Version: 16081
MediaPortal Version: SVN 16081
MediaPortal Skin: Default
Windows Version: XP SP2 Pro
CPU Type: Intel...
Up! Up1
there's any news about that?
Up! Up1
there's any news about that?
Hi!
At today i can't put and resume to hibernation Mp with my Technotrend S-1500 CI, i tried to follow other people instruction...