Problems with the TV-Server or MyTV frontend? Post them in here.
I've get the TV-function works very fine, but I've some problems with a few TV channels, so I do a rescan.
After that I can not see any channel.
The TV Server finds every channel, but when I try to see it, it seem like MePo hangs for a short while but I don't see something after that (same with the channel preview in config).
Make a...
I've get the TV-function works very fine, but I've some problems with a few TV channels, so I do a rescan.
After that I can not see...
I've get the TV-function works very fine, but I've some problems with a few TV channels, so I do a rescan.
After that I can not see...
Update - I realised the previous setup had a fixed IP address. I went into the IPv4 settings and put a fixed IP there and restarted, and it worked! Jeeez! :confused: I have spent 7 hours on this last night and this morning!
Update - I realised the previous setup had a fixed IP address. I went into the IPv4 settings and put a fixed IP there and...
Hi Guys,
I have done a complete new install on my faithful lounge HTPC. This is now a client only and feeds from the dedicated TV...
Thx man! You really saved my day!
For those of you who suddenly have no TV or Recordings avilable. and who are told to enter the correct Servername or IP... here is my story. For some reason my HDD was completly full. After clearing about 300 GB my TV didnt work although other clients could use the TV server without problems. I...
Thx man! You really saved my day!
For those of you who suddenly have no TV or Recordings avilable. and who are told to enter the...
MediaPortal Version: 1.1.0 final
MediaPortal Skin: STREAMED MP 1.3
Windows Version: XP SP3
CPU Type: Intel 2*3.0GHZ
HDD: WD 1...
Just a small update. I went over to UNC and noticed a small change in zapping speed.
Just a small update. I went over to UNC and noticed a small change in zapping speed.
This weekend updated my server (MP TV server and file share) from XP to W7 Ultimate 64bit (to able to use a new 3TB HDD).
This...
Hi Guys,
Sorry for the slow response. I upgraded to 1.3 and it fixed the problem. Been running on the Alpha release since Friday and not seen any that's causing me any problems either! Only watch out is loosing logo's and some set-up setting after upgrade.
Thanks all for your assistance.
Regards,
Andy
Hi Guys,
Sorry for the slow response. I upgraded to 1.3 and it fixed the problem. Been running on the Alpha release since Friday...
Hi,
I have setup post processing as per the wiki guide to up-scale my TV picture. This works fine when I first start to watch...
Hi,
finally set up my MediaPortal box to work fine. There is just one issue: when watching live TV while recording on the same transponder video/audio hangs sometimes with a few artefacts. Doing the same on different transponders works perfectly. Each tuner-CAM is set to only decrypt one channel as the Cine C/T cannot decode multiple...
Hi,
finally set up my MediaPortal box to work fine. There is just one issue: when watching live TV while recording on the same...
Hi,
finally set up my MediaPortal box to work fine. There is just one issue: when watching live TV while recording on the same...
Hello,
sudenly tv is not possible. First on some day and now all the time watching tv is not possible.
I get some lightnings on the screen and sound artifacts. tiny pieces.
I dont know why. Maybe it is a power lan issue.
I would be nice to get some detailed informations from the logs. Every Help is welcome.
regards,
epsilon2
Hello,
sudenly tv is not possible. First on some day and now all the time watching tv is not possible.
I get some lightnings on...
Hello,
sudenly tv is not possible. First on some day and now all the time watching tv is not possible.
I get some lightnings on...
"cured" the problem by reverting to my old router.
ps gentle config correctly identified the host names on all machines and even changed all for ip address to no avail.
"cured" the problem by reverting to my old router.
ps gentle config correctly identified the host names on all machines and even...
When trying to watch live TV on either of my 2 clients I always get the connection to tvservice lost message and nothing more. All...
Had LAV, but re-installed it.
Selected LAV in all the playback settings where it's allowed.
Working now, thanks!
Had LAV, but re-installed it.
Selected LAV in all the playback settings where it's allowed.
Working now, thanks!
I've been using my HDHomerun successfully with both the quick watch app and VLC.
However, when setting it up under tv-server I have...
Hello mr_si
You need to configure codecs in MP configuration:
I suggest you use the MP extension installer to install the LAV codecs.
mm
Hello mr_si
You need to configure codecs in MP configuration:
I suggest you use the MP extension installer to install the LAV...
My last HTPC went tits-up for some reason (my last post reported random freezes - the whole machine is doing it).
Clean-ish XP...
I have the same problem.
I could be nice if anyone have a patch / workaround.
Thanks
I have the same problem.
I could be nice if anyone have a patch / workaround.
Thanks
Hi team,
I would like to avoid installing a full blown DB server (either MS or MySQL) just to have TV Server running.
Is it...
Hello RickCOH,
Good luck with the search for a new TV card.
Have you tried to use your smartcard without a CAM and with the anysee viewer software?
http://www.anyseedirect.eu/product-downloads/anysee-downloads.html.
If that works powermarcel his instructions should work.
Jean
Hello RickCOH,
Good luck with the search for a new TV card.
Have you tried to use your smartcard without a CAM and with the anysee...
Hello Mediaportal forum,
I am using an Anysee E7PTC which is an internal card with a cam slot for DVB-C.
Link here (Sorry...
Yeah I don't understand SAF since LAV is all you need as far as I can tell.
Yeah I don't understand SAF since LAV is all you need as far as I can tell.
MediaPortal Version: 1.2.1
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 x64 SP1
CPU Type: Intel Celeron G530 (2.4...
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/15_Customization/TV-Server/Ramdisk_for_Timeshifting/Suggested_Ramdisk_Settings
I found ntfs + win7 overhead was about 55mb on my 4096mb ram drive.
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/15_Customization/TV-Server/Ramdisk_for_Timeshifting/Suggested_Ramdisk_Settings
I...
Hi all,
i know this has been asked before, but we never got a definitive answer....
What would be the best way of configuring...
Hello Geoff
It sounds like a codec issue, but could you please post log files using the watchdog tool:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files
If the problem is reproducible, follow the instructions for reproducible problems and just attempt to play one or more recordings for 15 seconds or...
Hello Geoff
It sounds like a codec issue, but could you please post log files using the watchdog tool...
when i go to watch recorded TV it plays but i can't see the picture or the picture takes 5 or more seconds to appear.
If i push...
Hello
As has been said, I suggest you have a read of the linked wiki page and possibly a quick search of the forum.
You don't add it to a card directly. Rather, you install a software package (often provided by your tuner vendor) that includes the required encoders. If the encoders are MP-compatible, they can then be used by any...
Hello
As has been said, I suggest you have a read of the linked wiki page and possibly a quick search of the forum.
You don't...
How on earth do you add a software encoder to a card?
The issue is the HDD/SSD. It probably doesn't matter how fast it is: if MSE is trying to rescan the timeshift or recording files at the same rate that TV Server is spitting them out then there is a problem. :)
The issue is the HDD/SSD. It probably doesn't matter how fast it is: if MSE is trying to rescan the timeshift or recording files at...
After working fine for a few weeks MP is suddenly not able anymore to play TV. Even the timeshift files show the mentioned error...
I've solved exactly this with a IRSS Macro which
send "Stop" twice (to get of this popup windows)
then key "H" for homescreen
mapped it to Stop butten
and waf increased :D
I've solved exactly this with a IRSS Macro which
send "Stop" twice (to get of this popup windows)
then key "H" for homescreen...
As I come from Windows Media Center there is one (actually two) thing that I find a bit difficult to get used too (as do my kids...
Hello,
I just connected my AVR Receiver (back from repair) via HDMI. Bevor repair TV was fine and without it direct conected to TV, too.
Everythin is doing fine like BluRay (via PWDVD), Music, DVD & videos. Just live TV has a black screen.
If I go back to Menu, I can see livetsbuffer thing is runnig.
I have no idea what has...
Hello,
I just connected my AVR Receiver (back from repair) via HDMI. Bevor repair TV was fine and without it direct conected to...
Hello,
I just connected my AVR Receiver (back from repair) via HDMI. Bevor repair TV was fine and without it direct conected to...
I have two problems which have surfaced recently after yet another 'waking from sleep' corruption issue (!!!).
a) I have numerous Recorded TV programs on the hard disk AND I have imported them in via the TV Server configuration, however, when I go into Recorded TV, none of the recorded programs are showing up. However, if I then...
I have two problems which have surfaced recently after yet another 'waking from sleep' corruption issue (!!!).
a) I have...
I have two problems which have surfaced recently after yet another 'waking from sleep' corruption issue (!!!).
a) I have...
Thanks for that hint with the MediaPortal.xml file.
I just opened that file in notepad, saved and closed it. That did the trick.
Thanks for that hint with the MediaPortal.xml file.
I just opened that file in notepad, saved and closed it. That did the trick.
Hello Forum,
Some days ago my MP SQL database crashed an I had to rebuilt it.
Until then my TV client did remember the last...
So some more testing this weekend. I had the problem most @HD Channels. So since i have disabled this service ... no sporadic timeouts anymore :)
Is it possible to add this "solution" to the wiki for Multiseatusers ?
So some more testing this weekend. I had the problem most @HD Channels. So since i have disabled this service ... no sporadic...
Hello people,
for a very long time I have a problem with wathcing live television.. The problem is that live tv stopped working...
btw - I'm pretty sure you can also adjust cropping on the fly using the remote. It's via the F9/info button -> video settings -> croping.
btw - I'm pretty sure you can also adjust cropping on the fly using the remote. It's via the F9/info button -> video settings ->...
Is there any way to get MediaPortal to apply some cropping only to SD channels and not HD ones? I want the full 1920x1080 pixels...
OK, i will try it when i have time
EDIT:
So here are the new Log-Files.
I have initialised every single tuner separately. It worked flawlessly.
Then by 100 tunings under "Test Channels" i've got 7 tunings ignored.
Again, thanks for your help mm1352000 and sorry for spamming you with so many Logs. :whistle:
OK, i will try it when i have time
EDIT:
So here are the new Log-Files.
I have initialised every single tuner separately. It...
Hi,
Using a Hauppauge HVR4400, when I try to tune a channel, I get "No Signal".
If I look into the log file, I see
Hauppauge...
Hi Knobby,
I connect to my Lounge-based HTPC via my laptop all the time. Shouldn't be difficult.
A few questions first..... sorry... :oops:
I take it MP runs OK on your main HTPC?
Can you 'ping' your HTPC from your laptop, so you know they can talk to each other?
Is your HTPC showing up on the network in your Laptops file...
Hi Knobby,
I connect to my Lounge-based HTPC via my laptop all the time. Shouldn't be difficult.
A few questions first...
MediaPortal Version: 1.2.3
MediaPortal Skin: StreamedMP
Windows Version: Vista SP2
CPU Type: AMD Athlon x2
HDD: 500gb Samsung...
Thanks so much for the reply - I will update the drivers and report back.
Thanks so much for the reply - I will update the drivers and report back.
hi all
i am running MP 1.2.3 on Windows 7 64 bit ultimate. my tv server crashes around every 15 min when watching live tv and i...
I had the same issue. If you've recently installed Power Scheduler, make sure you stop then start the TV Service again:
TV Server COnfig> Manual Control> Stop Service> then Start Service
I had the same issue. If you've recently installed Power Scheduler, make sure you stop then start the TV Service again:
TV Server...
I'm using MP1.23 TV Server as an OTA Live TV front-end for XBMC 11. It is working reall well, including the EPG. The only thing not...
All fixed....
I removed the UNC path entries on the client...and it now works :)
J.
All fixed....
I removed the UNC path entries on the client...and it now works :)
J.
Hi there,
I know its an "experimental" feature, but I am using UNC with multiseat.
I have a problem with recorded TV. On the...
***bump***
https://forum.team-mediaportal.com/threads/cablecard-tuner-support-for-mediaportal-1.112585/
***bump***
https://forum.team-mediaportal.com/threads/cablecard-tuner-support-for-mediaportal-1.112585/
MediaPortal: Version: 1.2.1
MediaPortal Skin : Defalut
Windows Version : 7 Pro
CPU Type: AMD
HDD Segate : 2Tb
Memory : 4 Gb...
Okay, I changed my mind - I'm going to bump my other priorities for the moment.
https://forum.team-mediaportal.com/threads/cablecard-tuner-support-for-mediaportal-1.112585/
Please come and help! :)
Okay, I changed my mind - I'm going to bump my other priorities for the moment...
Hey everyone, just got my Ceton TV tuner installed and working today. Problem I have now is that MediaPortal TV Server does not...