Post problems you have when using MediaPortal,
or pre installation questions in here.
RESOLVED - Turns out that anything with an Intel chip since about 2009 has what seems to be an OS subsytem called Intel Management Engine. This led me to update my BIOS and hey presto my recordings are now working without video breakup. The last Intel ME update was around April, and that's about the time I first noticed issues...
RESOLVED - Turns out that anything with an Intel chip since about 2009 has what seems to be an OS subsytem called Intel Management...
Hi Guys
I have discussed this issue before but I never got to the bottom of it. Entirely my fault as I wanted to test more, to try...
Here are some log files I am not sure if they are the correct one.
Here are some log files I am not sure if they are the correct one.
Happened a lot on a particular channel TEN.
When I tried to watch the same channel at the same time on the server it is fine, only...
So now my server goes to sleep as it should it seems. What's cool is that when a client starts up it wakes up the server through WOL most likely. Awesome stuff!
So now my server goes to sleep as it should it seems. What's cool is that when a client starts up it wakes up the server through...
After years of running my single sit MP1 24/7 I decided to save myself some money and make sure it goes to sleep whenever it needs...
"when the night has come - do do do,
And World Weather Lite ain't dark - do do do
And the moon is the only light you see..."
:D
"when the night has come - do do do,
And World Weather Lite ain't dark - do do do
And the moon is the only light you see..."
:D
Minor issue but I have noticed over the last few days that World Weather Lite is showing its nighttime view in the early evening...
Many thanks that was it, all is playing good now.(y)(y):):)
Many thanks that was it, all is playing good now.(y)(y):):)
I receive the German broadcaster Das Erste via DVBT2 antenna and the audio only ever seems to be in stereo despite some programs...
The thread is about MediaPortal 2, not MP 1, and is dealing with the Movie/Series importer, not EPG.
The thread is about MediaPortal 2, not MP 1, and is dealing with the Movie/Series importer, not EPG.
Can some developer please respond to this thread:
XMLTVImport duplicate item error
I have tried everything in my power to get it...
A frequent cause is a wrongly configured EPG grabber that is working in endless cycles. You should grab EPG from only one channel, which is providing program information for its complete program bouquet. If you configured your grabber in such way that every channel is grabbing and storing, you probably have a situation where the...
A frequent cause is a wrongly configured EPG grabber that is working in endless cycles. You should grab EPG from only one channel...
Hello
I have setup a mediaportal tv server together with file server, htpc and router at a single PC (windows 10)
This PC stays...
Yep if you use madvr you need to install madvr from madshi. You look at the wiki for help :)
Tapatalk
Yep if you use madvr you need to install madvr from madshi. You look at the wiki for help :)
Tapatalk
Hello,
I'll try to explain my issue.
I have MePo on an htpc running windows 7 e and connected to my tv on hdmi1 input. MePo starts...
Even more weirdness
Changing to no sound problem goes away as well - seems cursor.wav or click.wav have issue
But vol+ or vol- also make the recording happen as well as changing the volume.
<ok> which is select (RTN in notepad) seems to have a double action as well
This is definitely a bug as was working fine 1.18 - I'm going to...
Even more weirdness
Changing to no sound problem goes away as well - seems cursor.wav or click.wav have issue
But vol+ or vol-...
This is on my Parents System
Arrows keys work normally till I get to the upcoming episode menu
It which point something weird...
Good afternoon,
Are there Suspend and Power Off actions that don't create the yes/no dialog box? I want to create shutdown and standby buttons that just require a single keypress on the GUI with a defined button. Obviously actions 992 and 991 (which I currently use) don't do the job.
This is where a SEND KEYPRESS function might have...
Good afternoon,
Are there Suspend and Power Off actions that don't create the yes/no dialog box? I want to create shutdown and...
Good afternoon,
Are there Suspend and Power Off actions that don't create the yes/no dialog box? I want to create shutdown and...
On my Sony TV, one of the HDMI sockets supports "Audio Return Channel" (ARC). I think that this means that I could connect the system like this:
HTPC > (HDMI) > TV > (HDMI/ARC) > AV-AMPLIFIER > LOUDSPEAKERS
If your TV supports HDMI/ARC, re-arranging the connections as above might bypass the problem. The disadvantage is that it...
On my Sony TV, one of the HDMI sockets supports "Audio Return Channel" (ARC). I think that this means that I could connect the...
Hi,
maybe you have some advice for me. I have MP 1.19 installed on a Win10 X64 machine using an Intel i3 with integrated Intel HD...
When you installed MP, did you use the "Run as administrator" option (either from "Windows Explorer" or from the "Command Prompt")?
Does the user account that runs MP (client and TV server) have administrator privileges? If not, try changing that user account into an administrator account.
(This is just guesswork based on the...
When you installed MP, did you use the "Run as administrator" option (either from "Windows Explorer" or from the "Command Prompt")...
Hi guys,
I use Windows 10 x64 and noticed that MPTray does not start anymore with windows.
The checkbox in the MP Config is set...
this seems to be related to the Ares skin. It can be somewhat fixed by replacing the mytvrecordedtv.xml with the one found in the DefaultWide skin. It really messes up the overlays though.
this seems to be related to the Ares skin. It can be somewhat fixed by replacing the mytvrecordedtv.xml with the one found in the...
For the past year or so I have not been able to get into my TV recordings menu. MediaPortal wont crash, but it just hangs and...
I've attempted setting up the IRSS Suite blaster software and on most attempts it will not learn any codes. On the initial setup attempt I got 0-4 buttons learned from my STB remote and then it just stopped giving me the ability to learn and the notification would just change directly to IR code not learned immediately. Subsequent...
I've attempted setting up the IRSS Suite blaster software and on most attempts it will not learn any codes. On the initial setup...
I've attempted setting up the IRSS Suite blaster software and on most attempts it will not learn any codes. On the initial setup...
I've moved the fix on to the 'request merge' stage in Jira, as it's probably had all the testing it's going to get from this thread, so it should go into 1.21 pre-release.
I've moved the fix on to the 'request merge' stage in Jira, as it's probably had all the testing it's going to get from this...
I've downloaded and installed MP 1.19, everything seemed to be fairly nice... I scanned the frequencies I wanted: DVB-T (514MHz)...
i don't know.
i don't know.
I develope my RAW images to adobeRGB JPG. If i enable WCG and HDR in windows 10 control panel, the photo dispalyed on my Oled TV...
Hi,
is it ok because the server creates a record as type once from the always record on this channel if times to be recording.
Hi,
is it ok because the server creates a record as type once from the always record on this channel if times to be recording.
This seems to have happened to me since upgrading to 1.20
I go into the TV guide and search for a show as normal. I set it to...
Hi Jasmeet_181, perfect answer, all back running how week like it!
Cheers
Groove
Hi Jasmeet_181, perfect answer, all back running how week like it!
Cheers
Groove
Crashing after 30 secs, wifi remote disabled but showing as error for some reason, logs attached, any help would be greatly...
Thanks so much guys. I'm good now.
I did install graphics drivers from the English version of that page, but apparently they were the wrong ones.
Thanks so much guys. I'm good now.
I did install graphics drivers from the English version of that page, but apparently they were...
I recently purchased a computer with Win 10 pre-installed. Downloaded Mediaportal and it came up on the first shot. I've been...
Guys,
I have added a bin here: MP hangs after suspend or TV off based on 1.20Final to try to see if it's not related to a wrong GUI SUSPENDING call not resumed by a RUNNING call.
So you need to reproduce it with debug level :)
Guys,
I have added a bin here: MP hangs after suspend or TV off based on 1.20Final to try to see if it's not related to a wrong GUI...
I have been running 1.12 for many years. Thought I would give a newer version a try. Basic functions all work and not issue tuning...
Hey Guys,
I'm on MP 1.20 and I am trying to import channels from a m3u playlist file - this seems to work until MPTVService configuration crashes midway through the import without any error message. I'd appreciate any help you can provide. Logs attached
Hey Guys,
I'm on MP 1.20 and I am trying to import channels from a m3u playlist file - this seems to work until MPTVService...
Hey Guys,
I'm on MP 1.20 and I am trying to import channels from a m3u playlist file - this seems to work until MPTVService...
1.20 seems to work ok now
1.20 seems to work ok now
Upgraded from 1.17 to 1.19 and the pause button no longer pauses video when using MadVR renderer. It used to work fine. It still...
Oops. I found a thread with a working solution for my problem:
Dynamic refresh rate not working
Bye!
Enviado desde mi Pixel mediante Tapatalk
Oops. I found a thread with a working solution for my problem:
Dynamic refresh rate not working
Bye!
Enviado desde mi Pixel...
Hi all,
I come from this thread:
Freezing after some time running
There you can see that I've been running MP 1.17 with no...
Hi! MP crashed a few times the last day. Any ideas? The logfile says it is the devicecensus.exe
Thanks!
Hi! MP crashed a few times the last day. Any ideas? The logfile says it is the devicecensus.exe
Thanks!
Hi! MP crashed a few times the last day. Any ideas? The logfile says it is the devicecensus.exe
Thanks!
look my signature for watchdog .
look my signature for watchdog .
Can anyone either help/tell me how to look for errors in the errors-logs, or can I upload the log file from watchdog and can anyone...
Thank you for taking the time to reply
If you close the MediaPortal Client and use windows explorer file browser, open networking, can you access the \\Server-PC\D\Media Portal Timeshiftfolder? Yes
on the problem system, can you watch recorded videos in your recording folder? No
Just to confirm, the other 2 MP1 Clients work...
Thank you for taking the time to reply
If you close the MediaPortal Client and use windows explorer file browser, open networking...
New client set up. Cannot play Live TV or recordings. Logs attached.
Checked forums and cannot see a fix, please can someone help...
For years I've been using an earlier version of that Cine S2 V7 from Digital Devices and it has always served me well.
For years I've been using an earlier version of that Cine S2 V7 from Digital Devices and it has always served me well.
For some years have had success with MP1.....using TBS 6922 card in i3 (2nd Gen) system.
Have now 'upgraded' (ha-ha!!) to i5 (8th...
Anyone have any idea what may be causing this error? A window pops up asking me to Continue or Quit. MP still is operating behind this window as if nothing was wrong, except for the spinning 'Wait' wheel. If I click "Continue", my GPU usage (as seen via Windows 10 Task Manager) goes through the roof, and the spinning 'Wait' wheel...
Anyone have any idea what may be causing this error? A window pops up asking me to Continue or Quit. MP still is operating behind...
Anyone have any idea what may be causing this error? A window pops up asking me to Continue or Quit. MP still is operating behind...
I have a problem with one file. restart does not help. in other players it shows good.
--
WBR, ajs :):whistle::coffee:
I have a problem with one file. restart does not help. in other players it shows good.
--
WBR, ajs :):whistle::coffee:
This error is frustrating.
When we try to open a videos, they do not play. Video file are on network server. We have correct...
If you want help, ask on the (German) EPG-Buddy thread and I will try to explain it as simple as possible. It really isn't hard to do but it takes it's time, Especially in the beginning when you are new to it and not familiar with the way EPG-Buddy is working...
If you want help, ask on the (German) EPG-Buddy thread and I will try to explain it as simple as possible. It really isn't hard to...
I noticed this a couple of days ago when checking for when the football is on, had hoped it would be corrected but as can be seen...
