Post problems you have when using MediaPortal,
or pre installation questions in here.
I think I can live with it for the time being and in the medium term replace it with a PCIe tuner in the summer when I plan to upgrade this PC. The 5881 is only a stopgap replacement for an old PCI tuner (no DVBT2 support) after it, the 5881 that is, could no longer be used on my laptop (portable antenna was just not good enough after...
I think I can live with it for the time being and in the medium term replace it with a PCIe tuner in the summer when I plan to...
I use a TBS 5881 usb tuner on my desktop PC. Following the upgrade from Win 1803 to 1809 I have been experiencing various problems...
Which TV do you use?
The most TV´s shows an HDR Logo if they find an HDR Signal.
Do you use Madvr?
Which TV do you use?
The most TV´s shows an HDR Logo if they find an HDR Signal.
Do you use Madvr?
Win 10 pro, MP1.20 final. Been using MP loyally for almost 10 years. Playback of HDR has been an issue since I got a 4K HDR TV...
Thanks again CyberSimian, that worked out great!
Thanks again CyberSimian, that worked out great!
Is it possible to access scheduled recordings without using the TV home screen? I've searched quite a bit and couldn't find a way...
That's why I mentioned it :) (I think the client and server plugins talk to each other)
Also read the Wiki pages for the PS plugin - PS - How it Works
That's why I mentioned it :) (I think the client and server plugins talk to each other)
Also read the Wiki pages for the PS plugin...
My server (MEDIA is system) is going to sleep whilst playing back recorded TV causing the Client (NUC7100) to crash
I scheduled...
Yes :( sorry...
--
WBR, ajs :):whistle::coffee:
Yes :( sorry...
--
WBR, ajs :):whistle::coffee:
Folks,
Apologies if this seems like a MP NOOB question, or has been answered before.
Using MP1.21 and just getting around to doing...
It's not a bug - it's just never been implemented (AFAIK).
It's not a bug - it's just never been implemented (AFAIK).
Have noted that MP does not display the number of audio channels in live ( or recorded ) tv info OSD. In Oz, the DVB-t FTA...
I've found that when streaming live tv from server to client via rtsp/rtp, the initial playback on the 1st channel selection does take a number of seconds for the MP client to actually send the RTSP describe/setup and play messages to the MP TV server, however, subsequent channel changes as initiated from client from live tv are...
I've found that when streaming live tv from server to client via rtsp/rtp, the initial playback on the 1st channel selection does...
Hi guys,
Since WMP was disabled for Windows 10, I needed a suitable replacement - and found success using Kodi as a front-end...
No
--
WBR, ajs :):whistle::coffee:
No
--
WBR, ajs :):whistle::coffee:
I would like to put a label control in my xml to tell me which control currently has focus (for debugging purposes/movement around...
All appears to be working as expected today. And I have changed nothing!
I'll see how it goes and update here.
F
All appears to be working as expected today. And I have changed nothing!
I'll see how it goes and update here.
F
I came back from a two week vacation and now I have to press the select button on my mce remote twice before it will select the...
Well, sods law. I now have been unable to get it to crash, using either the watchdog or normally so I'll put this on ice for now, and will post back once I get it to crash. Thanks for the efforts, and sorry for being snippy previously (It'd been a really, REALLY bad day...)
One thing I have now noticed though, is an apparent drop in...
Well, sods law. I now have been unable to get it to crash, using either the watchdog or normally so I'll put this on ice for now...
Hi all,
Having an odd issue with MP 1.19, which I have used for many years without fault. Recently, my SSD died for my OS, so a...
Hi :)
Not sure how to fix the flicker, it is related to madVR for sure.
Hi :)
Not sure how to fix the flicker, it is related to madVR for sure.
Hello,
since some MediaPortal versions video clips in the picture folder do not work. The clips flicker briefly and are finished...
update: found a few odd occasions when 5000 didnt work, 6000 displayed a different symptom, that when skipping to live, it would play along for sometimes
quite a while.. say 30 seconds and then stop. maybe a few skipped frames brought it too close to the end. set to 7000 now. Doesnt really matter, even 7000 is only 3 or so sec...
update: found a few odd occasions when 5000 didnt work, 6000 displayed a different symptom, that when skipping to live, it would...
Hi,
I have set up Mediaportal to take a video/stream from a webpage, and feed that in as a UDP DVBIP channel,
- basically OBS...
This only works sometimes for me
This only works sometimes for me
Hi there,
I am having the issue that some h265 videos only play audio and MP1 only shows a black screen.
I can play those videos...
- Redirect
Done - [MP1-4940] Audio volume control and OSD problems on Windows 7 - MediaPortal Jira
Can't say how long it might be until someone can look into it - just depends on when someone has the time (and a Win 7 system to debug it on).
In the meantime, this page lists a few volume OSD apps that might be useful as a workaround - 5 Tools...
Done - [MP1-4940] Audio volume control and OSD problems on Windows 7 - MediaPortal Jira
Can't say how long it might be until...
N/A
I had this issue using MP 1.20 Windows 7 x64, AMD 5570 catylst divers 13.12, since upgrading to MP1.21 Final, this issue has disappeared, but now have issue where remote volume OSD is absent....which was working in MP 1.20, :(
I had this issue using MP 1.20 Windows 7 x64, AMD 5570 catylst divers 13.12, since upgrading to MP1.21 Final, this issue has...
The much delayed rollout of the Win 10 x64 1809 update finally arrived for my HTPC but after installing I ran into a number of...
Hey :)
Can you make logs, it's really a pain with Intel GPU :(
Hey :)
Can you make logs, it's really a pain with Intel GPU :(
Hi,
DRR has stopped working. What is the problem please?
thx
Edit by Team Member :
Installation link including the fix ...
Hi all,
Since a while I'm using iptv to watch tv-content, most of the time it works like a charm except (who would've thought) when it doesn't.
The thing is, the connection to (or my iptvprovider itself) drops out on me (MPUrlSourceSplitter_Protocol_Http: instance 'Main': CurlDebug(): CURL message: 'Closing connection 2011') and...
Hi all,
Since a while I'm using iptv to watch tv-content, most of the time it works like a charm except (who would've thought)...
Hi all,
Since a while I'm using iptv to watch tv-content, most of the time it works like a charm except (who would've thought)...
Turns out any channel or group corruption will cause the manual control tab to not display without generating any visible error.
There may be information in the log but I haven't found that yet either.
In my case I had groupmap entries that did not have valid channels.
Once I deleted the groupmap entries that didn't have a...
Turns out any channel or group corruption will cause the manual control tab to not display without generating any visible error...
Hi all,
I have a long time running multiseat MediaPortal, with TVServer on separate computer.
But since today, 'Manual Control'...
Sorry, I'm busy at work the week (and most often the weekend) and even work on the weekend or late, I didn't finish what I have to do !!! So this is not good!
That's good news, you have found a lead that can trigger the issue.
It's needed to analyze this, it seems that this option is disabled on my HTPC, but need to confirm it :)
Sorry, I'm busy at work the week (and most often the weekend) and even work on the weekend or late, I didn't finish what I have to...
I have only noticed this problem since updating to MP 1.21 Final, on resume from sleep I do not get any sound when navigating (and...
- Redirect
Try this LMH dll ...
Try this LMH dll ...
N/A
I have just upgraded to MePo 1.20.0
But found out that for some reason WOL was not working anymore.
No clue if it happend because i was playing with MePo 2, or a error from my side.
I tried to use the WOL open from the Video Config, but that dident seem to have anny effect.
Now i'm trying with Power Trigger and mc-wol.exe
- Power...
I have just upgraded to MePo 1.20.0
But found out that for some reason WOL was not working anymore.
No clue if it happend because...
I have just upgraded to MePo 1.20.0
But found out that for some reason WOL was not working anymore.
No clue if it happend because...
Oh brother - I can confirm that ;):D;)
Oh brother - I can confirm that ;):D;)
Hi all!
Since the installation of the falls creators update of win10 i have a big problem:
Whenever i start a video file (h264...
A lot of the recent 'under the hood' changes in Windows were introduced in Windows 8, so I suspect that was when MS changed the network packet handling behaviour (in some way or other) which the MPIPTVSource filter is sensitive to.
The basic filter codebase is actually quite old (more than 10 years) with very few changes since then...
A lot of the recent 'under the hood' changes in Windows were introduced in Windows 8, so I suspect that was when MS changed the...
Hi,
I was using Mediaportal 1.16 to receive a multicast UDP stream (H264@14Mbps) from a device locally without issue. I recently...
Is there a way to scan channels over LAN in MP versions?
My attachment shows scanning in TV-Server Configuration on a Hdhomerun tuner which works very well.
I try to find and scan a Zgemma receiver with OpenATV 6.2 but cant get signal or scans.
How can I see and scan these satellite channels? Do I need a plugin?
Help?
Best reason is...
Is there a way to scan channels over LAN in MP versions?
My attachment shows scanning in TV-Server Configuration on a Hdhomerun...
Is there a way to scan channels over LAN in MP versions?
My attachment shows scanning in TV-Server Configuration on a Hdhomerun...
I suspect VLC has some more trickery for playback than LAV...
I suspect VLC has some more trickery for playback than LAV...
Hi,
Sometimes when I tune to a channel I only get a black screen without any audio.
Mediaportal responds normally while watching...
But of course it has.
But of course it has.
Ok, I've looked at all the similar posts, but none match this issue that I can find.
I had Mediaportal 1.2.3 working fine except...
No experience at all with sat stuff, but do TBS provide (or suggest) viewing/test software that will work with their cards?
(You'll need to stop MP TV Server running when you do this - use the 'Manual Control' tab in TV server config to stop/start it - as it won't share tuners with other software).
No experience at all with sat stuff, but do TBS provide (or suggest) viewing/test software that will work with their cards...
Hi Guys,
I'm currently getting my system back up and running again after a long absence. No point in having spent ££££'s on kit...
The Audio Description is definitely selectable via the OSD or Context menu, see the 1st and 2nd sceenshots, in this case German is the regular audio and the "mis" has audio description. If, however I select the Audio Description it plays but on restarting the vid (recorded from TV) it defaults back to the std. German. I have not found...
The Audio Description is definitely selectable via the OSD or Context menu, see the 1st and 2nd sceenshots, in this case German is...
Am presently running MP 1.20 as media player....WITHOUT TV SERVER!!
Problem has developed.....somehow, I've flipped a setting, and...
No, it was not on a task list. To add a setting is easy.
@HTPCSourcer I think it's a 15 minute task for a dev to add the setting.
No, it was not on a task list. To add a setting is easy.
@HTPCSourcer I think it's a 15 minute task for a dev to add the setting.
Hello,
I would like to ask you 2 questions regaring to volume OSD in MP1 and MP2.
1. MP1: is it possible to set up same volume...
I managed to get onto the lounge PC tonight, and looked through the logs again. I have the same issue as the other machine. I tried to register the TsReader using the admin command prompt as previously noted, but got the attached error message.
Hmmm.. any ideas?
EDIT: I reinstalled/repaired the Visual C++ files under Program Options...
I managed to get onto the lounge PC tonight, and looked through the logs again. I have the same issue as the other machine. I tried...
Hi,
I'm still having a problem in being able to play live or recorded TV with MP. This has been going on for around 10 months now...