General Support (526 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
I always make a point of answering my own questions if I find a solution so here it is... Deleting C:\ProgramData\Team MediaPortal\MediaPortal\database\VideoDatabaseV5.db3 solved the problem. It must have got corrupted because MP wouldn't even let me reset it in the Video Database options.
I always make a point of answering my own questions if I find a solution so here it is... Deleting C:\ProgramData\Team...
I am using the Avalon skin. When I have watched a video from start to end, it is still marked as 'unwatched'. This used to work but...
Replies
1
Views
3K
Hi I need to confirm this later and grab logs when I get home from work Not sure if anyone can try it as well to confirm The waf was recording a movie, she managed to stay awake whilst watching it so thought she would delete it when finished However the recording was still going due to post record I would expect it to pop up...
Hi I need to confirm this later and grab logs when I get home from work Not sure if anyone can try it as well to confirm The waf...
Hi I need to confirm this later and grab logs when I get home from work Not sure if anyone can try it as well to confirm The waf...
Replies
0
Views
650
Problem is now SOLVED!!! Please mark this thread is [fixed]! As it turns out, this was a DECODER problem! After changing the default ac3/mpeg audio decoder from LAV to any cyberlink or ffdshow audio decoder, analog radio plays perfectly without syncing problems :) Seems the tsreader fails to sync the audio with LAV audio decoder...
Problem is now SOLVED!!! Please mark this thread is [fixed]! As it turns out, this was a DECODER problem! After changing the...
The problem I will describe must be an easy one, although I can't find anything in the forum and/or the mp options to solve it...
Replies
5
Views
3K
Thank you, I had hope it is possible, but this satisfy me too
Thank you, I had hope it is possible, but this satisfy me too
I cant find solution how to choose quality for Media Portal Client. When I`m out of home, I want to watch tv by media portal client...
Replies
2
Views
1K
The upmix option http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/MediaPortal_Configuration/3_Music
The upmix option http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/MediaPortal_Configuration/3_Music
In XBMC, there is an option to output music to all channels. Is this option available in MP? If so, where?
Replies
2
Views
1K
Thank you. Perhaps I'll give V2 a shot and see if it's a little more forgiving.
Thank you. Perhaps I'll give V2 a shot and see if it's a little more forgiving.
Hello. Are there any config settings to have streaming server and tsreader (client) pause for x amount of milliseconds between...
Replies
6
Views
1K
MP1 MP2 MediaPortal Beta Install (2 Viewers) DE
ask in the thread for them to compile against MP1.3 beta so you can test it / use it.
ask in the thread for them to compile against MP1.3 beta so you can test it / use it.
Hi: I have a question regarding installing the 1.3 beta. I downloaded the 1.3 setup file and everything seems to have installled...
Replies
5
Views
2K
The experimental TsReader.ax and dshowhelper projects are separate/unrelated. The reason for suggesting the TsReader update is because there is an issue in the standard version which can result in an incorrect FPS value being parsed out of the stream occasionally (usually it reports 24 fps instead of 25 fps). This can cause MPAR to...
The experimental TsReader.ax and dshowhelper projects are separate/unrelated. The reason for suggesting the TsReader update is...
Hi, Been using Mediaportal for a year now, fantastic product :) been using it as my only source of TV for 6 months. But is a...
Replies
17
Views
3K
MP2 public winter release will be coming out soon I think. Maybe within 2-4 weeks.
MP2 public winter release will be coming out soon I think. Maybe within 2-4 weeks.
Is there a nice way, just within Mediaportal, to configure watching one channel whilst getting the audio from another DVB channel...
Replies
3
Views
1K
1. Mediaportal is design for using a remote or arrowkeys. But this behaviour i can't confirm. 2. If you are using MP 1.2.3 i can confirm, sheduling wasn't smooth at all. But give 1.3 MP Beta a chance. Scheduling recordings was really improved. No more timeouts.
1. Mediaportal is design for using a remote or arrowkeys. But this behaviour i can't confirm. 2. If you are using MP 1.2.3 i can...
I'm a long time user of SageTV and really like some of the ways it works. I installed MP and wrestled with xmltv to get the guide...
Replies
1
Views
2K
Mediaportal Wiki - Mediaportal Configuration: Codecs and Renderer: Video Codecs Mediaportal Wiki - Extensions: Remote Access: MP Extended: Installation Guide Mediaportal Wiki - Extensions: Remote Access: Web Mediaportal: Installation Guide Wifi Remote instructions in the forum Videos: You require correct codecs to be used...
Mediaportal Wiki - Mediaportal Configuration: Codecs and Renderer: Video Codecs Mediaportal Wiki - Extensions: Remote Access...
Is it possible to start listening music or watch video from remote on a PC? Idea - music and video are stored on NAS server -...
Replies
8
Views
2K
Dolby Digital / Pro Logic II & DTS are the supported audio formats, so indeed no HD Audio (DTS-HD, TrueHD, LPCM). This means that when you play a file which has HD audio, it will be 'downscaled' to normal DTS. It probably doesn't affect your setup, but you're limited to the non HD Audio formats (which still sound good).
Dolby Digital / Pro Logic II & DTS are the supported audio formats, so indeed no HD Audio (DTS-HD, TrueHD, LPCM). This means that...
Hi there, After messing around with my HTPC for a couple of years now, I am finally getting it set up exactly how I want it and...
Replies
3
Views
2K
Hi - back to the topic. The I resolved the problem disabling "AMD External Event Utility". Now I installed windows 8 and problem returned. But this time I don't have "AMD External Event Utility" service? I still have the same graphic card and Installed newest catalyst
Hi - back to the topic. The I resolved the problem disabling "AMD External Event Utility". Now I installed windows 8 and problem...
Hi, I have a problem with HDMI connection. I've recently changed HDMI cable (computer -> LCD-TV). I bought HDMI which is able to...
Replies
7
Views
2K
I did as you suggested and downloaded and installed MySQL as a standalone. TV Server now installs and is operating. HOWEVER, while doing the channel scans, it blue screens after about 20-30 minutes. After reboot, it again bluescreens if I try to scan for channels on the same adaptor again. If I try scans on another adaptor...
I did as you suggested and downloaded and installed MySQL as a standalone. TV Server now installs and is operating. HOWEVER...
I am running win 7 pro x64 and I am having trouble with the TV server stopping. I get the following error message:TV server...
Replies
10
Views
3K
perfect, everything works! :) at the end I just created symlinks from the command line interface (mklink ..), redirecting the log folder of MediaPortal and also that of the TV-server (the only note: I had to stop the service and then restart it to symlink created --> net stop tvservice / net start tvservice) thanks to all
perfect, everything works! :) at the end I just created symlinks from the command line interface (mklink ..), redirecting the log...
Hi all I have a HTPC with SSD disc, where I installed MediaPortal. I redirected the log files on a RamDisk, editing...
Replies
6
Views
2K
Using the latest versions of the very clever open source conditional access module software they will update the Sky card with the entitlements as required, including Box Office. The only thing they cannot do at present is bypass the HBO pin lock requirement; i.e. if on your decoder you need to enter a pin to watch something even...
Using the latest versions of the very clever open source conditional access module software they will update the Sky card with the...
Hello, Apologies for raising a subject that has been done to death but I have recently seen Sky advertising constantly on TV and...
Replies
3
Views
1K
Hi, I am running a Multiseat envirement and want use lowest possible Hardware spec for the server. Is a P4M with 1.5 GHz enough for Full HD streaming? (Gigabit Network) How much memory ist used on WinXP 32bit? (how much timeshift i have with 2 GB Ramdisk) Due to miss of a second HDD I would like to use a SSD for Timeshift. Are...
Hi, I am running a Multiseat envirement and want use lowest possible Hardware spec for the server. Is a P4M with 1.5 GHz enough...
Hi, I am running a Multiseat envirement and want use lowest possible Hardware spec for the server. Is a P4M with 1.5 GHz enough...
Replies
0
Views
730
Any ideas?
Any ideas?
Hi, after installing MP 1.3 Beta i have some problem with my TV-Server on my Singel-Seat System. After resume from StandBy is the...
Replies
9
Views
2K
Sorry not but it would love it, too. Comfortable renaming....
Sorry not but it would love it, too. Comfortable renaming....
Does anybody know how to refresh the recording table of MySQL database via batch/script instead of using TVServer Configuration?
Replies
1
Views
1K
As above - Move MePo PC to lounge - Client PC in the lounge - HDMI extender. You can get 10m with a long HDMI cable any longer than this and the signal isn't strong enough. For longer distances you can get an HDMI signal amplifier or an HDMI-Ethernet (Cat5e) adapter, or an HDMI wireless adapter. SmartTV - This will not be an...
As above - Move MePo PC to lounge - Client PC in the lounge - HDMI extender. You can get 10m with a long HDMI cable any longer...
Mediaportal runs fine on my PC, I can watch my videos... But how do I go about reading these videos from my TV ? what are the...
Replies
4
Views
1K
Hi Folks, I thought I'd pop back here and give you an update on this problem. I installed Windows XP Pro SP3 then reinstalled MP 1.2.3. Since then I have had no problems at all in returning from standby, and my system has worked perfectly ever since. So it would appear that there's some issue between my hardware/Vista &...
Hi Folks, I thought I'd pop back here and give you an update on this problem. I installed Windows XP Pro SP3 then reinstalled MP...
MediaPortal Version: 1.2.3.0 MediaPortal Skin: StreamedMP Windows Version: Win7 SP1 32 bit CPU Type: AMD Athlon X2 2000+ HDD: WD...
Replies
30
Views
7K
installed the client version 1.2.3 on Win 7 x64, everything seems to be fine but i found some strange lines in the logfile, maybe someone can explain what it means: 2013-01-26 17:51:12.788696 [Warn.][Config Main(1)]: Plugin Manager: Plugin Cornerstone.Tools.ProcessProgressDelegate is incompatible with the current MediaPortal...
installed the client version 1.2.3 on Win 7 x64, everything seems to be fine but i found some strange lines in the logfile, maybe...
installed the client version 1.2.3 on Win 7 x64, everything seems to be fine but i found some strange lines in the logfile, maybe...
Replies
0
Views
1K
I have mediaportal setup with a motorized satellite dish. The tuner I am using is a TBS5922. In general live TV is working fine. One issue I have is that when I select a channel on another satellite it may take 15 or more seconds for the dish to move to the other satellite. In the meantime Mediaportal has shown an error No Signal by...
I have mediaportal setup with a motorized satellite dish. The tuner I am using is a TBS5922. In general live TV is working fine...
I have mediaportal setup with a motorized satellite dish. The tuner I am using is a TBS5922. In general live TV is working fine...
Replies
0
Views
895
Ok, after a while I found out that restoring to the latest backup doesn't work because it seems that the DBs were already damaged at that date. So the last backup set already contains damaged DBs. I went back to the second last backup and everything works fine now. I lost about a week of "work", mainly converting several dozens of...
Ok, after a while I found out that restoring to the latest backup doesn't work because it seems that the DBs were already damaged...
Hi guys, on Tuesday I started my MP-HTPC for the first time since serveryl days. MP updated itself with new LAV and trakt (may...
Replies
13
Views
2K
MP1 MP2 Recording formats DE
eg. %title%/Season %series%/%title% S%series%E%episode% - %name% Breaking Bad/Season 01/Breaking Bad S01E01 - Pilot.ts
eg. %title%/Season %series%/%title% S%series%E%episode% - %name% Breaking Bad/Season 01/Breaking Bad S01E01 - Pilot.ts
Hi all been using argustv server for a while now,but want to start using the mediaportal tv server but have a question about the...
Replies
3
Views
2K
MP1 MP2 Powerscheduler++ (2 Viewers) DE
I'm having very similar problems to swicksey. My system is a Gigabyte GA-965P-DQ6 fully up to date BIOS, with Intel E7400 processor, Windows XP fully patched, Hauppauge NovaT500 TV card. PC was totally unresponsive, especially after TV option was taken, even Ctrl-Alt-Del didn't work. Maybe hindered by the 'always on top' setting...
I'm having very similar problems to swicksey. My system is a Gigabyte GA-965P-DQ6 fully up to date BIOS, with Intel E7400...
I installed powerscheduler++ and since doing so when I press the power button on the remote it puts my computer into sleep mode (I...
Replies
3
Views
1K
I managed to get the TechniSat CableStar Combo HD CI to work on MediaPortal 1.3.x https://forum.team-mediaportal.com/threads/got-the-technisat-cablestar-combo-hd-ci-to-work-in-1-3.116067/
I managed to get the TechniSat CableStar Combo HD CI to work on MediaPortal 1.3.x...
Ich benutze die Technisat CableStar Combo HD CI Box Mediaportal-Version: 1.3.0 Treiber: Aus diesem Thread...
Replies
9
Views
2K
MP1 MP2 Trouble with HTPC DE
Ok so it seems its not my computer, Maybe TV Server not sure how to track it down.
Ok so it seems its not my computer, Maybe TV Server not sure how to track it down.
Hi guys I have been chasing a problem with my htpc and can not track down the problem, So I'm after some advise for more things to...
Replies
6
Views
2K
Hi tourettes, thanks for Your answer. But what do You want to say me with the link. There I can find some bug-items with similar problems. Can You give me please short answers to the questions. Is there generally a clever command to temporarily minimize MP... Is there a command line or internal command to MP to close easy... Are...
Hi tourettes, thanks for Your answer. But what do You want to say me with the link. There I can find some bug-items with similar...
Hello, My MP 1.2.3. is running now 2 months pretty neat. But I'm still not quite satisfied. Problems makes switching to a second...
Replies
2
Views
1K
Problem disappeared after reboot of server and didnt occur since.
Problem disappeared after reboot of server and didnt occur since.
Hello folks! I have the following Problem with MP 1.3.0 beta: When playing DVD folders from a network server, video and audio...
Replies
1
Views
909
Top Bottom