Specific prefix :
Show all
MP2 - V2.5
MP2 - V2.4.1
MP2 - V2.4
MP2 - V2.3.2
MP2 - V2.3.1
MP2 - V2.3
1.25.0
[solved]
Answered in the bug report thread.
Answered in the bug report thread.
I have added a rip of The Shape Of Water to my movies library. It imports fine, but no artwork appears.
The folder name is THE...
Hello,
Since windows 7 is not supported yet by microsoft, I migrated from windows 7 x64 to windows 10 x64.
I have a server on which a WinTV-quadHD card is installed. This card worked perfectly before the migration and no hardware change was made (not a single cable disconnected).
Since my passage under windows 10 x64, I can't get...
Hello,
Since windows 7 is not supported yet by microsoft, I migrated from windows 7 x64 to windows 10 x64.
I have a server on...
Hello,
Since windows 7 is not supported yet by microsoft, I migrated from windows 7 x64 to windows 10 x64.
I have a server on...
Hi and thanks for the reply...
Narration is always on by default when I install MP1 but it's simple to turn off in the settings, seems it's not the case with MP2 as everything is handled via the GUI a far lower level of control is available, basic audio settings are available but nothing that relates to the problem, maybe I have to...
Hi and thanks for the reply...
Narration is always on by default when I install MP1 but it's simple to turn off in the settings...
Does anyone know how to turn off audio description (narration) when watching live tv as it seems to be turned on by default, can't...
That 's what I see.
I've retired from software development in favour of getting a 1910 gaff cutter back sailing, and as that development was in DataFlex I doubt that it's relevant to MP development.
That 's what I see.
I've retired from software development in favour of getting a 1910 gaff cutter back sailing, and as that...
The setting up of scheduled recordings seems to be the weakest part of MP2 - in fact I'd go as far as to say one aspect of it is a...
...in that the FullScreenContentAudio.xaml is in a sub-folder of the Program Data folder, not the Program Files (x86) folder.
...in that the FullScreenContentAudio.xaml is in a sub-folder of the Program Data folder, not the Program Files (x86) folder.
As it says...how can I switch OFF the (awful) bouncing visualisation when listening to audio ???
I found a link in settings to...
Many thanks for your fast response.
Hopefully I'll get to work through these items in the next few days.
Kind regards.
Many thanks for your fast response.
Hopefully I'll get to work through these items in the next few days.
Kind regards.
Hi,
I'm new to the world of HTPC and Media Portal but I've decided to give it a go since my Pioneer DVR-LX60D PVR failed and is...
If EPG shows wrong times it means that the import data is wrong or that you xml import applied a time correction while Windows was still - presumably - in another time zone. If you are able to trigger another EPG import, the problem should solve itself. I believe that there is also the possibility to clear the EPG in the TV...
If EPG shows wrong times it means that the import data is wrong or that you xml import applied a time correction while Windows was...
I have just come from using WMC and am puzzled by the apparent behaviour of the EPG guide in MP2 (incidentally the grabber system...
Hi.
New version 0.5.0.6 released, download link is at the end of first post:
EPG-Buddy a new EPG Tool with easy usage.
Hi.
New version 0.5.0.6 released, download link is at the end of first post:
EPG-Buddy a new EPG Tool with easy usage.
It took me a while to find a download site for EPG Buddy, but I finally did, and then I installed it. Since I'm in Florida, I...
I stand corrected;), I guess that since I had always enabled the "Sceneo" option in MP1, even before your much improved Centarea HID was available, I had assumed it did not use Escape even from the KB.
I stand corrected;), I guess that since I had always enabled the "Sceneo" option in MP1, even before your much improved Centarea...
I have just switched from MCE to MP2 and find the Wiki unhelpful in that putting something in the Search box seem to produce only...
Sorry for not getting back...was overtaken by circumstances!
Initially...thought there had been an improvement....but then (quite co-incidentally I assume) began to have problems with sound.
Became impossible to get ANY sound from MP2...TV/Video/Audio...
Tried every combination of setup on audioplayer config page...to no avail... :(
I...
Sorry for not getting back...was overtaken by circumstances!
Initially...thought there had been an improvement....but then (quite...
Using Titanium Extended / Blue Vision.
When selecting TV....the blue 'activity ring' (?)....animated circular icon!...continues to...
@CSMR , is your question answered?
@CSMR , is your question answered?
MP 1 has excellent browsing by folders. Browse on one side of the screen, with info about the currently selected content on the...
It is. :)
Settings / Appearance / General / Activate skin sounds effects
It is. :)
Settings / Appearance / General / Activate skin sounds effects
i am sure it is something simple, but in mp1 I could turn off the sounds as you navigate the menus? But I cannot seem to find how...
TMDB provides certifications for series but not for movies as far as I can see.
TMDB provides certifications for series but not for movies as far as I can see.
Hi,
I'm trying to figure out why all my movies, when I go to filter by certification, that they are all unrated?
In the settings...
At least it now works on a second attempt, which it didn't before, and I don't suppose I'll want to run the TV Configuration very often.
Thanks again for your help.
At least it now works on a second attempt, which it didn't before, and I don't suppose I'll want to run the TV Configuration very...
When I try to run MediaPortal I sometimes get the message box:
------------------------------------------------------
Failed to...
Thanks MM for your help. Last I said I was getting channels but the tuner wasn't tuning any channels. Went through your setup wiki once more and now I have TV again! Thanks again...on to fine tune it now.
Thanks MM for your help. Last I said I was getting channels but the tuner wasn't tuning any channels. Went through your setup wiki...
Been using WMC since 2013 using Hauppage DCR-2650 with cable card and Verizon FIOS. Now that MS pulled the plug on EPG data, I...
Thank you for that explanation HTPCSourcer - very clear - and it has set my mind at rest about being 'hacked'.
Thank you for that explanation HTPCSourcer - very clear - and it has set my mind at rest about being 'hacked'.
Hello, I'm brand new here so I hope that I'm posting in the correct place - if I'm not please forgive me and correct me - thanks...
No, not explicitly. Again for the same reason as cited above. Genre information can be part of the description but is not necessarily.
You can verify your situation by activating the genre coloring on the EPG and check what is colored. This requires the movie to be marked as such in the description, which is not often the case.
No, not explicitly. Again for the same reason as cited above. Genre information can be part of the description but is not...
Hi,
I hope you can help me.
ISSUE:
How to Search Media Portal 2 for Movies only.
To search for them in the 7 day EPG that...
Did you hit 'R' or was it 'r'?
Keyboard commands need to be entered as capitals.
Did you hit 'R' or was it 'r'?
Keyboard commands need to be entered as capitals.
I've installed and setup Mediaportal 2, so I am now receiving OTA TV. But I cannot, for the life of me, figure out how to record...
Sorry logfiles might help...
Sorry logfiles might help...
From a beginner seeking further help. OK so my tv recordings go into default location and appear on the TV menu. Also if I copy wtv...
Yeah, I saw that early on and switched it to MP. I also went back into Windows 10 and made sure I had all the sharing options and network discovery on. Did not make a difference. :confused: Maybe uninstalling/reinstalling something? I'm at the beginning stage so this wouldn't be a bit deal. My Google-Fu has not revealed anything yet.
Yeah, I saw that early on and switched it to MP. I also went back into Windows 10 and made sure I had all the sharing options and...
Good day from Texas.
Just have a clean install of windows 10 on my HTPC. Since Media Center is going the way of the dodo, I...
Found the button I used on MP1 to map the yellow button didn't work with MP2, all good used another button.
Now I can change audio tracks and subtitles with remote for video but found that this didn't work with Live TV Subtitle. I have to use "Info" and the subtitle icon at the bottom to turn it on or off.
Found the button I used on MP1 to map the yellow button didn't work with MP2, all good used another button.
Now I can change audio...
I have a MCE remote without the colour buttons.
I can't figure out how to map one of the button to do that? I can do that with MP1...
MP1
MP2
[solved]
Could not find the MediaPortal.Common.Logging.ILogger service after upgrading from 2.2.2 to 2.2.3
DE
Thanks for your fast help. The repair didn't work, but the uninstall - install fixed the problem.
Kind regards, Frank
Thanks for your fast help. The repair didn't work, but the uninstall - install fixed the problem.
Kind regards, Frank
MediaPortal 2 Version: 2.2.3
Description
Hello,
After upgrading MP2 from 2.2.2 to 2.2.3, MP2 client doesn't start anymore. When...
Can you imagine to amend the BV skin/themes accordingly?
Can you imagine to amend the BV skin/themes accordingly?
Hi there,
1) While navigating between the different movies in the menu, I would sometimes like to see the movie info screen...
I am not sure without seeing the logs. BR discs are usually encrypted. A Windows system can't play such disc without additional software that decrypts it on the fly. Unless such software is installed on your system, MediaPortal will no be able to play the disc.
I am not sure without seeing the logs. BR discs are usually encrypted. A Windows system can't play such disc without additional...
I hope the answer won't be so obvious as it was with the last thing I posted here lol. Got a new blu ray player today but when I...
You got it! Didn't know I had to configure the decoder. It had no hardware decoder selected. Thanks for the help
You got it! Didn't know I had to configure the decoder. It had no hardware decoder selected. Thanks for the help
Trying to figure out why DVD playback is very glitchy, slow, buggy, etc. Playing the DVD in VLC works completely fine, but in MP2...
OK I have manually imported the moved recordings and all seems well. Yes I did restart the MP2 Server Service and the exception still occurred, however i have not had it recently since opening this thread. For the 'missing' recording post that seems to be resolved thanks to your help. Suggest we close this thread. Thanks for...
OK I have manually imported the moved recordings and all seems well. Yes I did restart the MP2 Server Service and the exception...
As a newcomer to MediaPortal I have installed MP 2.2.2. Ihave followed the setup guide and TV reception seems fine. I have set the...
I am running MP2 on a machine using a Zalman HD160XT Plus having moved from Windows Media Centre.
I know there are multiple plugins/extensions available for MP1 to take advantage of the display and hardware in this case, but to be honest the thing I miss the most is having the iMon/Soundgraph/Frontview spectrum analyzer displayed...
I am running MP2 on a machine using a Zalman HD160XT Plus having moved from Windows Media Centre.
I know there are multiple...
I am running MP2 on a machine using a Zalman HD160XT Plus having moved from Windows Media Centre.
I know there are multiple...
Please see here how to issue problem reports. Focus is on the red text.
Please see here how to issue problem reports. Focus is on the red text.
I installed media portal 2.2.2, rebooted, connected my hauppauge wintv-dualHD USB tv, connected my antenna to it. Ran the TV...
Thanks @HTPCSourcer
I will create a scheduled task and see how I get on with that - I have just been using Alt-F4 until now to quit the MP2 client.
Have created some systems specs in my profile.
Thanks @HTPCSourcer
I will create a scheduled task and see how I get on with that - I have just been using Alt-F4 until now to...
I am running a standalone setup using and AMD/ATI graphics card connected by HDMI to a TV and everything is working pretty well...
@badboyxx , any feedback about your issue?
@badboyxx , any feedback about your issue?
Hello,
I've give MP2 (version 2.2) another try and wanted to test it simultaneous with MP1. I have installed it as a single seat...