Post problems you have when using MediaPortal,
or pre installation questions in here.
No, I haven't even installed TBSViewer, the computer is only used for MP.
The driver is the most recent TBS6922 Windows Driver V1.0.1.4. Signal quality was 82 to 84 for the channels I tested.
I remember a case when there were 2 recordings on the same channel one day apart, the first was complete, the second was just 49 seconds.
Yes...
No, I haven't even installed TBSViewer, the computer is only used for MP.
The driver is the most recent TBS6922 Windows Driver...
Hi everyone,
can you please tell me why MP 1.3.0 has recorded only a small part of films I scheduled for recording on multiple...
Thanks for the reply, much appreciated. Hopefully this will crop up in Google searches if anyone else has the same issue.
Thanks for the reply, much appreciated. Hopefully this will crop up in Google searches if anyone else has the same issue.
Hi,
Strange problem with 1.3.0 last night. MePo crashed on startup, ditto if you went via config, so no logs to post, sorry...
There are thoughts about including powerscheduler++ in default MePo installer, not sure if this is still happening, or if it's included in 1.4 or not.
There are thoughts about including powerscheduler++ in default MePo installer, not sure if this is still happening, or if it's...
Hi Guys,
I have installed the MP TV Server only on my dedicated server. I would like to install PS++ on that instead of the...
I'm reading this... but I agree with mbuzina. The process described by gibman in the other thread really requires you to have the code for best results... and if you have the code and you have Visual Studio then compiling debug versions of MP should be very easy. Yes, it is a bit intimidating but I encourage you to push through. It is...
I'm reading this... but I agree with mbuzina. The process described by gibman in the other thread really requires you to have the...
Can someone point me in the right direction of how I can get a debug version of TVservice.exe used in Mediaportal V1.3.0, so that...
Hello rickyman1977
Support for custom patches and plugins is only provided by the people who release them. Therefore, you should ask for support in the CableCARD thread. When you ask for help, please include all log files as instructed in the first post of that thread. Otherwise it is very very hard to help you.
Hello rickyman1977
Support for custom patches and plugins is only provided by the people who release them. Therefore, you should...
i have install the following:
MP 1.3 final
cablecard driver on (WIP section)
i have mapped all the channel.
ceton cablecard 4...
Keep in mind the gentle.config file is pushed to the clients from the server. If you want to make changes to that file, they should be made on the server (in order to keep the clients "in sync"). I suspect your old TV Server database was not blown away when you did whatever you did, and the clients did not receive a new gentle.config...
Keep in mind the gentle.config file is pushed to the clients from the server. If you want to make changes to that file, they should...
System:
Windows 7 64bit
AMD A8 3870
8gb RAM
MediaPortal 1.3 Final
Schedules Direct Plugin
IP Tuning Via TV Blaster and...
that it's normal behaviour . arrows do skip steps, ffwd changes playback speed . you can probably chance behaviour by editing the xml or altering mapping in mp configoh those buttons are for changing chapters
that it's normal behaviour . arrows do skip steps, ffwd changes playback speed . you can probably chance behaviour by editing the...
Good afternoon,
I recently upgraded to 1.4.0, and noticed my old USBUIRT remote was functioning oddly (one click would case...
I have a multiseat setup running MP 1.3, Consisting of a stand alone server and two client PCs. All PCs are set to static IPs.
From time to time (once every two days) on the clients I get a connection to server lost message. When I click on the message it goes away and the client can reconnect again. Since this setup is in a larger...
I have a multiseat setup running MP 1.3, Consisting of a stand alone server and two client PCs. All PCs are set to static IPs...
I have a multiseat setup running MP 1.3, Consisting of a stand alone server and two client PCs. All PCs are set to static IPs...
Please provide logs, guessing causes is not fun (MP works on Win7 & 8 if configured correctly). Sounds to me like Firewall is interfering - try to disable for a test.
Please provide logs, guessing causes is not fun (MP works on Win7 & 8 if configured correctly). Sounds to me like Firewall is...
Hi i have the tv server running on windows 7 and when i try to watch it on a win 8 computer connected to the same network it says...
Hello and welcome :)
To receive that transponder you'll need a DVB-S2 tuner.
Then make sure you have ticked the option that enables scanning and tuning of DVB-S2 channels.
Finally, scan using the following settings:
frequency = 11494000
symbol rate = 22000
polarisation = horizontal
modulation = 8 PSK
inner FEC rate = 2/3
pilot = on...
Hello and welcome :)
To receive that transponder you'll need a DVB-S2 tuner.
Then make sure you have ticked the option that...
Hey,
first thank you very much for the great work developing MediaPortal! I really like it!
I'm trying to scan and find all...
his name is "MePo"
I believe he's originally made for Mediaportal by grassynoel who is an original mediaportal team member, but he spread to other htpc applications
his name is "MePo"
I believe he's originally made for Mediaportal by grassynoel who is an original mediaportal team member...
I downloaded and installed MediaPortal 1.3.0 on a Win 7 x64 system. I'm not having interface issues or compatibility issues...
OK so I'm happy to continue using RTSP since it seems stable but then I need to get this channel changing time down, so I'll make another thread for that. Thanks for the help everyone.
Also, it may be a while before I can upgrade to 1.4.0 since it seems the Custom Data Grabber won't be available until the final version (if at all).
OK so I'm happy to continue using RTSP since it seems stable but then I need to get this channel changing time down, so I'll make...
I have MP TV Server running on my server 24/7. When I wake up my HTPC (running MP client) in the morning and try to play TV, I just...
Hi, Ive had a lot of trouble with the new version of MP especially the TV server. So I have loaded the older version 1.2.3. but I need an older version of Online Videos as the newer version does'nt work with the older version of MP, can anyone point me in the right direction - Thanks
Hi, Ive had a lot of trouble with the new version of MP especially the TV server. So I have loaded the older version 1.2.3. but I...
Hi, Ive had a lot of trouble with the new version of MP especially the TV server. So I have loaded the older version 1.2.3. but I...
I can confirm - it shouldn't. MP and TV Server are independent in this regard.
I agree, and this is not normal.
I can confirm - it shouldn't. MP and TV Server are independent in this regard.
I agree, and this is not normal.
I get always a blue screen when I shutdown my pc. When I deactivate the service TVService.exe then everything is ok. My DB has no...
I'm running the Mediaportal 1.4.0 Pre-Release on a Windows 8 64-bit System. My issue is nothing at all to do with MePo; rather it's the TV Service and how it interacts with Win8. I've been getting this message in my Event Log, and I'm not sure what's causing it:
"The TVService service did not shut down properly after receiving a...
I'm running the Mediaportal 1.4.0 Pre-Release on a Windows 8 64-bit System. My issue is nothing at all to do with MePo; rather it's...
I'm running the Mediaportal 1.4.0 Pre-Release on a Windows 8 64-bit System. My issue is nothing at all to do with MePo; rather it's...
Hello guys I'm currently using xbmc as it is easy to customize the button, but I will try again with the media portal.
Want to know how can I remove some button like tv and other.
Hello guys I'm currently using xbmc as it is easy to customize the button, but I will try again with the media portal.
Want to know...
Hello guys I'm currently using xbmc as it is easy to customize the button, but I will try again with the media portal.
Want to know...
Ok, so I figured out what the problem was. My Intel i3-540 could not play VC-1 using LAV Filters. So I followed this guide and used the Arcsoft Video codecs instead and it works 100%.
Rob
Ok, so I figured out what the problem was. My Intel i3-540 could not play VC-1 using LAV Filters. So I followed this guide and...
Hello,
I love having Native Bluray within Mediaportal but it seems I cannot play certain discs (Dr Who - Complete Fifth Season)...
Hello
Your TV database has crashed:
Gentle.Common.GentleException: show columns from `schedule` ---> MySql.Data.MySqlClient.MySqlException: Table '.\mptvdb\schedule' is marked as crashed and should be repaired
at MySql.Data.MySqlClient.MySqlStream.OpenPacket()
at MySql.Data.MySqlClient.NativeDriver.ReadResult(UInt64&...
Hello
Your TV database has crashed:
Gentle.Common.GentleException: show columns from `schedule` --->...
Hi All
Have just recently encountered this problem,
on start up of TV the guide doesn't show but then will come up fragmented...
does your PC with TvServer has IP 192.168.99.1 ?
Maybe the driver of your network card can take too long to initialize after wakeup. Solution - driver update or using Microsoft Loopback adapter.
does your PC with TvServer has IP 192.168.99.1 ?
Maybe the driver of your network card can take too long to initialize after...
(I don't know how to produce the fancy System Spec in the posting, so please see my User Profile for my system)
Hi folks,
after...
HomeY, your "strings_de.xml" was the solution! (y)
I guess, it was overwritten by one from an old skin. The old one has a size of 95 kb, the new one 120 kb.
Should not have tried older, incompatible skins... :rolleyes:
The reason why defaultwide is displayed is because in Debug-Mode the skin changes to defaultwide automatically...
HomeY, your "strings_de.xml" was the solution! (y)
I guess, it was overwritten by one from an old skin. The old one has a size of...
Hi folks!
After messing around with some skins (some incompatible to MP 1.3 :whistle:) some of the menu buttontexts are missing...
Sounds like a plugin problem.
You can either use these instructions...
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files#For_Non_Reproducible_Problems_within_MediaPortal
...which should include all your logs, or follow the instructions for reproducible problems and use the option for reporting issues...
Sounds like a plugin problem.
You can either use these instructions...
I have a problem with my MePo 1.3.
From time to time i get the startup Splash - Haning with the message Initialising input devices...
I didn't install 1.4. Partly because it is a pre-release and this is the main MP machine. But unfortunately after uninstalling and reinstalling MP completely, the PC crashed. This happened when scanning for analog channels on a Hauppauge HVR-2200 (something with paging in a nonpaged area BSOD). After that the whole PC wouldn't start...
I didn't install 1.4. Partly because it is a pre-release and this is the main MP machine. But unfortunately after uninstalling and...
I updated MP-TVSeries, PowerScheduler++ and Titan Extended with the MP Extensions Manager. After that, Mediaportal didn't start...
Thank you very much!
Thank you very much!
MediaPortal Version: 1.3.0 Alpha
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 SP1 Ultimate 64Bit
Video Card: ATI...
Yeah I've always used IP addresses, it's just that it kept converting it back. Anyway, I finally figured out how to remove old entries from my router so I could re-use the 192.168.1.99 IP address and, so far, it seems like everything is working now. :D
Channel changes seem about the same as they were when I was using a combined...
Yeah I've always used IP addresses, it's just that it kept converting it back. Anyway, I finally figured out how to remove old...
I'm trying to install MediaPortal 1.3.0 on my server, which is running Windows Server 2012. I've installed my BlackGold BGT3600...
Ahh thanks alot, it works :)
Ahh thanks alot, it works :)
Hi
After I have done a TV-serie update I get problem if I want to watch more then one episode so I have to close and reopen the MP...
I have tried but couldent chhose screens how ever i can i you version. Godd i now have some what of a solution. But ugly cause it a third pard software piece.
But thanx man :)
I have tried but couldent chhose screens how ever i can i you version. Godd i now have some what of a solution. But ugly cause it...
Im too annoyed that there is no default "showing the volume when in full screen" setting. :(
This was promised in 1.3 but didnt...
Hi Geoff
I'm not certain what the conventional wisdom is when it comes to SSDs, however I thought heavy use can have practical implications for lifetime/durability?
In other words, I wouldn't have thought it would be recommended to use an SSD for timeshifting or recording.
For timeshifting performance people tend to use RAM drives...
Hi Geoff
I'm not certain what the conventional wisdom is when it comes to SSDs, however I thought heavy use can have practical...
hi
I just got a new SSD drive for my primary partition.
I've got a 20-30 GB spare capacity which i would like to use for...
That worked!
Thanks alot
That worked!
Thanks alot
Hi guys,
I dont think this has ever worked but i really think it should be fixed.
Im running the latest 1.4 pre release build...
I'll try to. But as this is an occasional error, it might take some time to track this. And to solve the underlying issue would be my primary goal ;)
I'll try to. But as this is an occasional error, it might take some time to track this. And to solve the underlying issue would be...
Ok, this is not a MePo problem per se, but maybe someone will be able to help out:
I am running my HTPC client on a Asus...
Windows starts MP directly with the desktop, the same as with all other applications. Without the desktop a desktop program can not run. So MP is loaded while the metro start screen is shown and a little later the script kicks in to show the desktop. There is no additional loading here (except a very small script). If you find a...
Windows starts MP directly with the desktop, the same as with all other applications. Without the desktop a desktop program can not...
Sinds the release of mp 1.3 is switched to windows 8. The change from windows xp to windows 7 was a big releave for me. It totally...