Having trouble installing or configuring MediaPortal?
A friend of mine wrote a python script to translate my old recordings from vdr to recordings able to import into MP. Most of them are shown up in the recordings folder to import them into MP. As far as good. But some recordings do not show up. Now I found out, that the problem is a & within the value of a tag (i.e. COMMENT) in the...
A friend of mine wrote a python script to translate my old recordings from vdr to recordings able to import into MP. Most of them...
A friend of mine wrote a python script to translate my old recordings from vdr to recordings able to import into MP. Most of them...
Hi
I can´t find the MPEInstaller on the dedicated tv-server.
I want to install the backupsettings plugin.
Problem solvers...GO ;-)
When i upgraded to 1.8 yesterday all channelsettings, webepg and satellites dissapeard. is this normal?
Best regards Mattias
Hi
I can´t find the MPEInstaller on the dedicated tv-server.
I want to install the backupsettings plugin.
Problem solvers...GO ;-)...
Hi
I can´t find the MPEInstaller on the dedicated tv-server.
I want to install the backupsettings plugin.
Problem solvers...GO ;-)...
MP1
MP2
Would a second identical satellite tuner card be properly recognized and work as expected?
DE
A lot of people use them and most of the time they do their job well. If I were you the main thing that would scare me is that (AFAIK) the Prof tuners are clones of some of the older TBS cards (QBOX [1], 6920, 8920 etc.)...
A lot of people use them and most of the time they do their job well. If I were you the main thing that would scare me is that...
Now that I have MediaPortal working with a Prof 7301 DVB-S2 satellite tuner card (a huge THANK YOU to mm1352000 for his assistance...
I said ProgramData for a reason. "Program Files (x86)" is the wrong place to look. Please read my post again carefully.
I said ProgramData for a reason. "Program Files (x86)" is the wrong place to look. Please read my post again carefully.
MP 1.5 was working fine for quite some time. Since a few days TV in MP is not working. When starting MP and selecting "TV ein" in...
I think there is a wording question. but this does not help/fix your problem. In wiki
0 => "last" channel, if you watch 2 channels, you can press "0" to swap between the last 2 channels, on TV remotes this is "flashback", "recall" etc
F7/F8 => previous/next channel, are go to next lower/higher channel number in your EPG group
I think there is a wording question. but this does not help/fix your problem. In wiki
0 => "last" channel, if you watch 2...
Hi,
I am using Win 8.1, MP 1.7 with a Hauppauge remote 45 button. In parallel I have a Yamaha AV Receiver and there is the...
Not as much as I am:). I just say WAF...
Not as much as I am:). I just say WAF...
Hello,
Despite other people reporting success, I keep having issues setting up a TV Server on WSE 2012.
The crazy thing is that...
I've tried all these fixes and I am still getting this error. It was working a few hours ago, went to use it and now just error. Reinstalled after a full Revouninstall, Ccleaner and turned firewall and AV off, still same error message. Most annoying, any help would be truly appreciated.
Edit: I should say I tried to reinstall yet...
I've tried all these fixes and I am still getting this error. It was working a few hours ago, went to use it and now just error...
TV-Server Version:
MediaPortal Version: 1.0.0.0
MediaPortal Skin:
Windows Version: Vista Home Premium
CPU Type: Dual Core...
so, what I did now: I deleted the recordings in the database, and reimported via setup, but STILL: Helix as the only (and latest) recording would not show up.
?
Are there any logs that could help?
so, what I did now: I deleted the recordings in the database, and reimported via setup, but STILL: Helix as the only (and latest)...
Hi all,
due to a system failure, I needed to reinstall my HTPC -Server. Everything worked fine, however I have a lot of recorded...
Import can be a mixture of add and update, so when you say "restore... back to the way they were" I would probably use other terms.
Like the scan process, the import process also tries to avoid creating duplicate channels. This is to handle the scenario where TV Server has channels before import and there is some overlap between the...
Import can be a mixture of add and update, so when you say "restore... back to the way they were" I would probably use other terms...
I am having a really strange issue that occurs whenever I attempt to scan the channels on a staellite. Just for reference, I have...
ok going to do that tomorrow :)
ok going to do that tomorrow :)
Before I did have my MP and my movie and serie on the same computer.
Now I have move to a house and I have now a Mediaserver that...
Thanks for the reply, mm135200. For the moment I'll just set the STB to not sleep. And, please consider this as well a feature request for future versions. Thanks for a great product!
Thanks for the reply, mm135200. For the moment I'll just set the STB to not sleep. And, please consider this as well a feature...
Is there a way to have MediaPortal wait for, say, 10 seconds after sending the IR Blast to change channels (using IR Server Suite)...
My partner has one video she watches all the time.
I'd like to add a tile to the home page so she can select it and it goes directly to that video file, either playing it or going to an info screen she can select to play rather than having to drill down through the Movies hierarchy to find it.
It is not a commercial movie if that...
My partner has one video she watches all the time.
I'd like to add a tile to the home page so she can select it and it goes...
My partner has one video she watches all the time.
I'd like to add a tile to the home page so she can select it and it goes...
Yup, I understand the OS is unsupported but I don't really have an alternative. I need the server to do some other things and it needs to be a server OS for that. I honestly wasn't expecting full support or anything, just hoping someone might be able to suggest something I've missed...
UPDATE:
I borrowed a Windows 7 installer from...
Yup, I understand the OS is unsupported but I don't really have an alternative. I need the server to do some other things and it...
Hi folks,
I've just got some new hardware to replace my creaky old server and I'm busy trying to get it all set up again..
I've...
You said the problem occurs often but not always. I'm asking when it last occurred, not when the problem started occurring.
You said the problem occurs often but not always. I'm asking when it last occurred, not when the problem started occurring.
Yippeeee....some weeks of running MP with little or no probs!!!
Often...not always I hasten to add....TV service (set to...
Didn't cross my mind to try EVR - and it works!
Thanks,
HTPC_Sourcer
Didn't cross my mind to try EVR - and it works!
Thanks,
HTPC_Sourcer
Hello,
I have set up a Windows Server 2012 Essentials machine to replace my old WHS v1 system. One of the next steps will be to...
Hello MM,
Thank you very much for your quick reply.
Yes, I am using Titan and a mouse. Great news if that is all that I am doing wrong.
I will take your adivce and load a new skin.
I am looking forward to getting MP fully set up and working on my HTPC
Thanks much for your help
Curly
Hello MM,
Thank you very much for your quick reply.
Yes, I am using Titan and a mouse. Great news if that is all that I am...
Hi Folks,
This is my first post on this forum so I appologize in advance if this topic has been covered already.
I recently...
MP1
MP2
[solved]
How do I specify a DiSEqC switch AND a 22 kHz tone switch with a DVB-S2 satellite card?
DE
Problem solved.
PLEASE NOTE that this post ONLY applies for users in North America. If you live elsewhere in the world this probably does not apply to you. Before I begin, a huge THANK YOU to mm1352000 for his assistance in getting this working!
This turned out to be a big part of the solution, but just keep in mind that if you...
Problem solved.
PLEASE NOTE that this post ONLY applies for users in North America. If you live elsewhere in the world this...
Please help! Brand new MediaPortal user here (just installed it today) and I am trying to make it work with my 5 satellite dishes...
You scan them in with the DVB-IP/IPTV tuner.
Set up an m3u playlist with the URL(s) of the restreamed streams. Copy one of the DVB-IP tuning detail playlists if it helps. m3u files can be opened and edited in any text editor (notepad, wordpad etc.).
Then just go ahead and scan according to the normal DVB-IP scan process...
You scan them in with the DVB-IP/IPTV tuner.
Set up an m3u playlist with the URL(s) of the restreamed streams. Copy one of the...
So can I add a rtsp stream into my tv channels? I have 1 IP camera that I can access via VLC @ rtsp://192.168.254.5/now.mp4 . I...
Is it possible to have MediaPortal only launch external media players under certain conditions ? For example by evaluating the filename ?
I'd like to use the internal player as much as possible, but for 3D have it use Arcsoft's TMT6.
I was thinking of adding "_3D_" to the filenames... maybe MediaPortal can check for this substring...
Is it possible to have MediaPortal only launch external media players under certain conditions ? For example by evaluating the...
Is it possible to have MediaPortal only launch external media players under certain conditions ? For example by evaluating the...
So my first post gets to be with problems installing! I'm trying to install MediaPortal 1.7.1 and everything runs smooth until it tries to install MS Visual C++ 2008 SP1 KB973552, which crashes, and ends the installation. I'm running Windows 7 Ultimate with all current updates (just ran on 6/11/2014). So far, I've tried downloading...
So my first post gets to be with problems installing! I'm trying to install MediaPortal 1.7.1 and everything runs smooth until it...
So my first post gets to be with problems installing! I'm trying to install MediaPortal 1.7.1 and everything runs smooth until it...
I'm using my TV's remote through the Pulse Eight CEC controller to control Media Portal. As such, this seems to be working fine, but I'd like that same remote to also work when launching an external player... Currently, I'm using Arcsoft TMT6.
Can anything be done to achieve this ? How to make TMT aware that it needs to take input...
I'm using my TV's remote through the Pulse Eight CEC controller to control Media Portal. As such, this seems to be working fine...
I'm using my TV's remote through the Pulse Eight CEC controller to control Media Portal. As such, this seems to be working fine...
I managed to install. Here is what i did, for future reference;
In Internet Explorer's Internet Options -> Connections -> Lan Settings ---> Uncheck Automatically Detect Settings
After that, installation went smoothly.
I managed to install. Here is what i did, for future reference;
In Internet Explorer's Internet Options -> Connections -> Lan...
Hi,
I was trying to fresh install Mediaportal 1.7.1 on Win 8.1. But i keep getting this "can't find internet connection" error. I...
Here's a zip of the files in the MP server log folder. I did not scan for channels today (6/1) unless it was early in the morning (I forget). If you need anything else, I'd be glad to help. MP is a fantastic product!
Here's a zip of the files in the MP server log folder. I did not scan for channels today (6/1) unless it was early in the morning...
I've searched through the forum for help and found some people having the same issues, but not a solution. I've been using MP for...
Answered on your other thread. How 'bout we stick to one thread. ;)
Answered on your other thread. How 'bout we stick to one thread. ;)
Using 1.6.0.17 snapshot. I was talked into installing a modification by djblu a few months ago, but I changed my mind and want to...
Hi folks
To cut things short: being a modder, i am building a HTPC out of the scratch, inside a DVD player case, so ti has no TV card or radio in it, will use it only for DVD and CD playback, maybe some gaming, so the integration must be seamless! Therefore i would like to remove these 2 main menu items from my Mediaportal Titan skin...
Hi folks
To cut things short: being a modder, i am building a HTPC out of the scratch, inside a DVD player case, so ti has no TV...
Hi folks
To cut things short: being a modder, i am building a HTPC out of the scratch, inside a DVD player case, so ti has no TV...
There's your answer - Use MP!(y)
There's your answer - Use MP!(y)
I did a new Install of MP 1.7.1 on Windows 8.1 Pro. It’s connected to a QNAP-NAS. Recording folder is
\\NAS\Recordings
Make any...
Thank you, that fixed it. Unfortuntately, Windows 7 did a bad boot the first time I tried it and was doing wierd things, so it did not work at first. But after I rebooted the laptop again, then it copied the fixed client Gentle.config file from the server box and it all worked again.
Thank you, that fixed it. Unfortuntately, Windows 7 did a bad boot the first time I tried it and was doing wierd things, so it did...
Mediaportal version 1.7.1
I am running TV Server on my main Window 7 PC. This has two ethernet cards, on addresses 10.0.1.2...
SOLVED: Updating to 1.7.HOTFIX gave me back my SBS. Thank you!
SOLVED: Updating to 1.7.HOTFIX gave me back my SBS. Thank you!
Ok, I must be missing something here. Trying to capture the new frequency for SBS here in Melbourne, I run TV Server Configuration...
In TV Server configuration: ensure the channels have the correct channel numbers assigned (channel number column, TV channels section).
In MediaPortal configuration: untick "select channel by index (non-US)": http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/MediaPortal_Configuration/22_TV/TV_Client#Channel_numbers
In TV Server configuration: ensure the channels have the correct channel numbers assigned (channel number column, TV channels...
Hi,
I was wondering how I can change the tv Channels so I can actually press 7 to go to channel seven and 73 to go to 7 mate.
at...
I have been getting errors when updating extensions since upgrading to MediaPortal v1.6.
The errors look like this:
Here is another thread I posted on this topic when I thought it related specifically to MP-TVseries. Now I know it happens for all extensions I update through the MediaPortal Extensions Manager or by installing them...
I have been getting errors when updating extensions since upgrading to MediaPortal v1.6.
The errors look like this:
Here is...
I have been getting errors when updating extensions since upgrading to MediaPortal v1.6.
The errors look like this:
Here is...