Having trouble installing or configuring MediaPortal?
Fixed it, Just enabled 3.5 in Program and Features (which is disabled by default)
Fixed it, Just enabled 3.5 in Program and Features (which is disabled by default)
This is a new install of Windows 8.1 (6.3 9600), with Update 1;
Unable to actually install Mediaportal, either 1.6 or 1.7preview...
Hallos,
Wollte auf meinem Rechner mit Win7 Ulimate Das Mediaportal 1.6 installieren.
Bei der Montage vom TV-Server kam der Hinweis "nicht bestanden Upgrade-Datenbank". SOMIT Lässt sich Druck Serverkonfiguration Nicht starten. Es Kommt Immer wieder der genannte Fehler.
Hallos,
Wollte auf meinem Rechner mit Win7 Ulimate Das Mediaportal 1.6 installieren.
Bei der Montage vom TV-Server kam der Hinweis...
Hallos,
Wollte auf meinem Rechner mit Win7 Ulimate Das Mediaportal 1.6 installieren.
Bei der Montage vom TV-Server kam der Hinweis...
here is the current one
here is the current one
Hi I need help on configuring mediaportal tv server. I have a infinitv for the tv tuner and I have Verizon as my provider.
I have...
Okay... but I still don't understand what you mean "changed". This is important because I can't really give you good advice unless I can understand this.
So, were these channels added (ie. completely new)?
Were they moved from another transponder?
Did the frequency of transponder 33 change?
Yes. To be clear that is an NIT (network...
Okay... but I still don't understand what you mean "changed". This is important because I can't really give you good advice unless...
I need some help with a recurring problem. I live in an area where we have Dutch ZIGGO in the Netherlands: network number 8888 ...
Here's a link to an old post that may help, don't know if its still valid for the latest Mediaportal versions or not. https://forum.team-mediaportal.com/threads/how-to-install-mediaportal-on-windows-2008-r2-x64-only.81774/
Here's a link to an old post that may help, don't know if its still valid for the latest Mediaportal versions or not...
Hi I am not sure if I should be posting here because I have server 2008 r2 but I have been reading for hours to try and get...
Yes, simple. :)
Fix the channel mapping:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/03_TV_Channels/2_Mapping
TV Server will treat the tuner as if it is completely new (because Windows gives it a new ID). By linking the old channels to the "new" tuner using the mapping section, it will...
Yes, simple. :)
Fix the channel mapping...
Is there a quick way to get my tv channels etc working again without dropping the database and re scanning them all in again?
Well...
Hi!
Im just installing fresh MP 1.6 and encountered some difficulties in tuning my DVB-C. I found many Channels by usind predefined lists in TV Server but missing Pro7, RTL and some more.... Just dont know how to regain them. Have tried full scan, some other predefined ones but no success :P Any one knows what to do or have an actual...
Hi!
Im just installing fresh MP 1.6 and encountered some difficulties in tuning my DVB-C. I found many Channels by usind...
Hi!
Im just installing fresh MP 1.6 and encountered some difficulties in tuning my DVB-C. I found many Channels by usind...
Hi,
Since we had our "Retune" here in Australia I can't get all TV stations. According to ACMA only SBS has changed in Melbourne yet I can't scan for Seven or SBS. I've read other posts like https://forum.team-mediaportal.com/threads/australian-dvb-t-retune.119003/ and tried editing the XML file as well as doing a manual scan but...
Hi,
Since we had our "Retune" here in Australia I can't get all TV stations. According to ACMA only SBS has changed in Melbourne...
Hi,
Since we had our "Retune" here in Australia I can't get all TV stations. According to ACMA only SBS has changed in Melbourne...
"I would like to see mediaportal create a function in the configuration so you can set the playback device for the whole of mediaportal so you can hear the program sounds."
I would also very apreciate this!
"I would like to see mediaportal create a function in the configuration so you can set the playback device for the whole of...
Hi All,
I thought i would share the following information with you all seeing at it has caused me no end of confusion and i...
I can't install MP 1.4, 1.5, 1.6, 1.7 ! After unpacked a message displayed "Deploy Tool doesn't work"! Please help, thank you.
Ich kann MP 1.4, 1.5, 1.6, 1.7 nicht installieren. Man sieht das entpacken, danach erscheint die Fehlermeldung "Deploy Tool funktioniert nicht mehr"! Bitte helft mir, danke.
I can't install MP 1.4, 1.5, 1.6, 1.7 ! After unpacked a message displayed "Deploy Tool doesn't work"! Please help, thank you.
Ich...
I can't install MP 1.4, 1.5, 1.6, 1.7 ! After unpacked a message displayed "Deploy Tool doesn't work"! Please help, thank you.
Ich...
Hi zeus
/mrj
Hi zeus
/mrj
I can´t find out how can I enable AERO in w7 as requested by MP 1.6 installer. I have an Aero Theme in Control Panel-appearance-...
Hello everyone,
I think this might be an issue with my videos, but am hoping there is an automatic solution. I have a lot of videos (TV series) and there are differences in volume between them when I play them. Currently I use LAV that is included with mediaportal and it is set up to bitstream to my soundbar/amp. When I play newer...
Hello everyone,
I think this might be an issue with my videos, but am hoping there is an automatic solution. I have a lot of...
Hello everyone,
I think this might be an issue with my videos, but am hoping there is an automatic solution. I have a lot of...
@Sebastiii Sorry for the delay.
@Sebastiii Sorry for the delay.
Because of some other problem I installed my HTPC completly for new.
But now I have another problem.
After resuming from standy by...
The mysql schema isn't used (and is not needed) to do this check. IMHO it's just a bug: https://forum.team-mediaportal.com/threads/setuptv-configure-db-connection-test-fails-if-mp-user-have-only-rights-to-the-mp-database.124312/
The mysql schema isn't used (and is not needed) to do this check. IMHO it's just a bug...
Hi guys!
I've been trying to get a TV-Server up and running the last few days on 1.6 final using a mysql-server I allready had...
Hi Guys,
today after starting by accident the MPE installer twice it did not show up any of my plugins anymore.
After I updated RadioTime manualy it list's only the RadioTime plugin.
There is and have no log file like MpeInstaller-Error.log produced :-( So I don't know what to provide. Please let me know!
No window MP update was done...
Hi Guys,
today after starting by accident the MPE installer twice it did not show up any of my plugins anymore.
After I updated...
Hi Guys,
today after starting by accident the MPE installer twice it did not show up any of my plugins anymore.
After I updated...
Hi
I'm not sure it will be of any use, this is the only log produced on the day I had the problem with deleting the channels and before I re-initialised the db. There is also a TVService-Error-5 file which is empty.
Hi
I'm not sure it will be of any use, this is the only log produced on the day I had the problem with deleting the channels and...
Hi
I had a satellite card on my server, but it's blown, I can't find anyway to delete the card and all of the channels so I can...
Alimentary indeed. Nothing like the bleeding obvious.
Thanks
Neil
Alimentary indeed. Nothing like the bleeding obvious.
Thanks
Neil
Been running MP without any problems and suddenly i get the dreaded message. Mysterious! logs attached. Is Sherlock available?
mm...
Thanks very much. I seem to have been able to get STB control through IRSS/TVE3 going.
Patrick
mm...
Thanks very much. I seem to have been able to get STB control through IRSS/TVE3 going.
Patrick
I believe I've trained the USB-UIRT correctly--taking over a two minutes to enter each of the remote codes. However, when I try to...
Titan is the default; you should be able to select Default/Default-Wide (I know confusing!) during installation, though it may require you to select the custom/advanced install option (to get more choices).
After install you should be able to switch to Default Wide here...
Titan is the default; you should be able to select Default/Default-Wide (I know confusing!) during installation, though it may...
I'm having trouble when I select TV in the Homescreen/Main Window. When I click on the TV "icon" I get a text menu, but when I...
I hope the title may tell it all really.
I've been looking for a Windows Media Centre / MCE Buddy alternative for a while, and found Media Portal. (I use MCE B to convert from .wtv to MP4)
Downloaded the file from Sourceforge and started the setup process.
The first time I saw the error message was as part of the setup process...
I hope the title may tell it all really.
I've been looking for a Windows Media Centre / MCE Buddy alternative for a while, and...
I hope the title may tell it all really.
I've been looking for a Windows Media Centre / MCE Buddy alternative for a while, and...
I was having the same prob on one of my clients and not on another. Couldn't figure it out so I tried all of the suggestions and it started working:
Set up static IP on tv server
Disable IPv6 on network card on tv server
Add host file mapping on client pc pointing to TV server IP
After doing all that I realized I'd always had a host...
I was having the same prob on one of my clients and not on another. Couldn't figure it out so I tried all of the suggestions and it...
Hi there I am running the latest version of Mediaportal on two Windows 7 PCs (one as a stand alone and the other as a client)...
No problem MM.
Of course you are right.
It's not a super-important issue.
It just annoys me as a 90% perfectionist, that I can't pin down the error ;)
Perhaps I still find a solution and if not it's not worth to spend more time with it.
Kind regards
Roger
No problem MM.
Of course you are right.
It's not a super-important issue.
It just annoys me as a 90% perfectionist, that I can't...
After upgrading from WinXP-32bit to Win7-64bit I noticed that the Preview-Channels function in the TV-Server configuration doesn't...
Have you checked that the channel numbers are set on your channels. That is done in TV Server configuration here:
http://wiki.team-mediaportal.com/@api/deki/files/2579/=TV-Server_Configuration_-_TV_Channels_-_Add.jpg
Have you checked that the channel numbers are set on your channels. That is done in TV Server configuration here...
I am trying to configure my HD PVR 2, but it does not appear as an option for channel mapping, etc. I think I read in another forum...
Hi @alltheway
Please see this link:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/14_Using_MediaPortal/3_TV/1_Watch_Live_TV/Fullscreen_TV/Actions_Menu/How_to_get_CC_in_ATSC%2F%2FQAM_streams
My cccp.ax file is dated 07/27/2013 - and works.
Hi @alltheway
Please see this link...
Hello all,
I've lately moved to MP 1.6 from 1.2.3, I was very pleased with the older version which used FFDshow for HD video...
Thanks for your help I had not even thought about TVServer being a service to try starting it.
Thanks for your help I had not even thought about TVServer being a service to try starting it.
OK I have a separate SQL (msSQL2012) server called BORR and a PC called PROMETHEUS
PROMETHEUS has the tuners. Tuners cannot be in...
Yes,...I could browse with button.
Now its read as ..........\\NAS-xx-xx-xx\media
And now I see all my media.
Thanks man.:D
Yes,...I could browse with button.
Now its read as ..........\\NAS-xx-xx-xx\media
And now I see all my media.
Thanks man.:D
Sorry it's been awhile since I used my "ReadyNAS Duo" box in Mepo.
Can someone be kind enough to give a helping hand and guide me...
Thank you for your advice, it is very good. I decided to uninstall everything re media portal and restart since i had run wrong scans already. I want a clean start so I can follow your advice correctly without worrying about what I had done before.
Ron
Thank you for your advice, it is very good. I decided to uninstall everything re media portal and restart since i had run wrong...
I just joined within last hour. I purchased the above referenced TV tuner in December and currently using with WMC. I recently...
Hi
To simplify - TV side uses SQL connection to 'external' DB service. As far as I know, ALL other plugins [native or installed] use DB files not SQL based connection.
So, in Client, you have database subdir, in there you have your DB's for Movies, MovingPictures, MPTVSeries.
On upgrade 'standard' , these are untouched, if you...
Hi
To simplify - TV side uses SQL connection to 'external' DB service. As far as I know, ALL other plugins [native or installed]...
Hi,
I am thinking to reinstall me HTPC soon and I have been running happily with mepo 1.2 up to 1.5 without too much issue.
And am...
Perfect, thanks. :)
Perfect, thanks. :)
Hi I am new to MP and I am trying to setup the TV Server to my Home Run Prime Cable card! I have setup and added channels but when...
I have the same issue with 1.5 onwards, as I believe many users did.
There were supposed to be changes made that improved the loading times. But it seems to have had the opposite effect.
In my case, and many others from what I have read, I had to set a manual delay in windows task scheduler, otherwise mepo got ahead of windows at...
I have the same issue with 1.5 onwards, as I believe many users did.
There were supposed to be changes made that improved the...
When MP 1.6 came out I did a complete re-install of windows 8.1 and MP.
I have MP to auto start.
Since the new setup it takes far...