Mainboards / CPU / RAM (4 Viewers)

Discussions about Mainboards, CPU, RAM and their drivers in here
MP1 MP2 Upgrade my RAM DE
I think I got a good deal. Thank you guys for all your help.
I think I got a good deal. Thank you guys for all your help.
Hello, I have this motherboard Micro ATX - VIA - KM266-8235 and I want to upgrade it to 2 GB, I have already one slot 512MB type...
Replies
7
Views
2K
the X4 is definitely faster, although it probably consumes more power obviously. But I would probably gone for something like this too.
the X4 is definitely faster, although it probably consumes more power obviously. But I would probably gone for something like this too.
I was looking at the Athlon II X2 245e as a CPU for an HTPC I'm building for my brother, on a motherboard with IGP HD3200. Would...
Replies
7
Views
3K
I have used ASRock J3455-ITX and J4205-ITX. 8-bit HEVC decodes fine and plays fine but 10-bit HEVC results in a stutter every minute or so when the screen resolution is set to UHD. The decoding isn't the issue for 2 reasons. Firstly, the CPU isn't being taxed and secondly, when outputted to 1080P display, there is no stutter...
I have used ASRock J3455-ITX and J4205-ITX. 8-bit HEVC decodes fine and plays fine but 10-bit HEVC results in a stutter every...
Hi, Been waiting for 4k@60Hz capable micro or mini ITX MB for a long time now. Looks like ASRock has the monopoly on this for...
Replies
8
Views
12K
Thanks for take the time to look at my problem. I attached the logs. It actually acted somewhat nice when everything was disabled in debug mode although there still was major framedrops.
Thanks for take the time to look at my problem. I attached the logs. It actually acted somewhat nice when everything was...
Right now my HTPC have a Point Of View - ION330 mainboad but i can't get it play HD Live tv with Mediaportal. (it works fine in...
Replies
8
Views
2K
A
innersky I was very unhappy with the poor TV-out on my graphics card Sapphire Atlantis 9200SE. High contrasts (i.e. white on black etc.) resulted in colourful artefacts at the edges like a pearly necklace. Because of the obviously different results with homemade solutions, as I read here, I bought this device...
innersky I was very unhappy with the poor TV-out on my graphics card Sapphire Atlantis 9200SE. High contrasts (i.e. white on black...
Hi there, I was looking for a motherboard which support either the Athlon 64 chips or P4 chips.. I haven't bought my chip yet so...
Replies
8
Views
3K
K
Sorry, I thought about that afterwards - it is more a video card question than a motherboard question, so I posted it there. But it is also somewhat related to this thread. Anyways, thanks for all your help!
Sorry, I thought about that afterwards - it is more a video card question than a motherboard question, so I posted it there. But it...
Hi! I have the following components: GIGABYTE GA-MA78GM-S2H AMD PHENOM TRIPLE-CORE 2.4 GHZ OCZ TECH OCZ Gold XTC 4096MB DDR2...
Replies
9
Views
3K
I'm thinking the new DFI board isn't shipping yet. At least none of the sources I checked have it yet. I've been buying DFI boards for at least 10 years. Long before they added the flashy stuff and became so expensive. They have always been very reliable and stable. Only one died and that's because the power supply killed it...
I'm thinking the new DFI board isn't shipping yet. At least none of the sources I checked have it yet. I've been buying DFI...
Hi, I've been doing a lot of research on a motherboard to use for a HTPC, and I really like the nForce430 motherboards with...
Replies
9
Views
3K
I'm running the Asus P5N7A-VM with integrated 9300 and a very low end Core 2 Duo 2.2GHz. I usually don't play 1080 content since my display is only 720, but I occasionally stream from 1080 sources. I haven't watched closely, but I think the GPU is handling most of the video. I can run HD streams while transcoding XVid and...
I'm running the Asus P5N7A-VM with integrated 9300 and a very low end Core 2 Duo 2.2GHz. I usually don't play 1080 content since...
Hallo, I need help, hints to choose the right onboard graphic chip to connect my HTPC via HDMI to my Sony Bravia KDL 40D3500. I...
Replies
9
Views
3K
No, I haven't tried the updated SilverStone drivers yet (I found them yesterday). But the weird thing is indeed, normally you either get an error message on startup, or no errors at all if you have driver problems with USB devices, and those error messages are totally different. I am starting to fear a hardware malfunction in the...
No, I haven't tried the updated SilverStone drivers yet (I found them yesterday). But the weird thing is indeed, normally you...
Hi all, I just bought the hardware for my HTPC, among them a SilverStone LC16 case and a Gigabyte MA69GM-S2H motherboard. I...
Replies
9
Views
7K
Thanks Spragleknas, I have just had a read of the link. I suppose 1333Mhz will have to do :rolleyes: - I'm using the large chunk of it for timeshifting. The memory is running in "unganged" mode to allow for the dual memory controllers and it is being reported as running at 1333Mhz. The performance is great, far quicker than the...
Thanks Spragleknas, I have just had a read of the link. I suppose 1333Mhz will have to do :rolleyes: - I'm using the large chunk of...
Hi Guys, I have now given up on my current server motherboard - it will not play nice with multicore processors. I need to get...
Replies
9
Views
3K
In most cases where wifi makes problems with video playback it also makes problems with other applications. Especially when you have problems with the connection reliability you'll have problems with the playback, too. I had some at the beginning of my htpc project and so I decided to use 1gbit LAN instead and I have to say that this...
In most cases where wifi makes problems with video playback it also makes problems with other applications. Especially when you...
I've currently got an HTPC with a PhenomII tricore, 430GT and 12GB Ram (amongst other things). This would make a pretty decent...
Replies
10
Views
3K
Yeah, that should be fine IMO. To be honest, the only thing I regret about mine is that I went for the PRO instead of the EM. The PRO is a full-ATX board and won't fit a lot of HTPC cases. There's a much wider selection of MATX enclosures.
Yeah, that should be fine IMO. To be honest, the only thing I regret about mine is that I went for the PRO instead of the EM. The...
Hey I found this mobo when looking for the cheapest way to build a full HD htpc. ASRock Motherboard - Product -...
Replies
10
Views
3K
Check Vis alle - Hardware - EDBpriser - find og sammenlign de bedste priser og tilbud på danmarks bedste prisguide Lowest price is 497 dkr
Check Vis alle - Hardware - EDBpriser - find og sammenlign de bedste priser og tilbud på danmarks bedste prisguide Lowest price is...
I've decised to get a Hiper Media Center HMC-2K53A case for my frontend machine but which motherboard should I get for it? I have...
Replies
10
Views
3K
MP1 MP2 An interresting mobo for HTPC (1 Viewer) DE
Its a wee bit old now but i built my HTPC with this board. Was running Windows Vista, and am Currently running Win7 with no issues. The Graphics chipset is plenty powerful enough to handle any HTPC work thrown at it, however it is let down by Ati Drivers which seem to be finicky with HDMI setup (once its going its fine, but getting...
Its a wee bit old now but i built my HTPC with this board. Was running Windows Vista, and am Currently running Win7 with no...
Albatron KI960-AM2
Replies
10
Views
4K
No my tv only supports 720p 720i and 1080i! Can set refresh rate to 25, 29 and 30 at 1080i.
No my tv only supports 720p 720i and 1080i! Can set refresh rate to 25, 29 and 30 at 1080i.
Im slowly building up the hardware for my HTPC. (buying a peice a week so it doesnt hit the pocket at 1 go) so far ive got ...
Replies
11
Views
3K
Well Ive just put in an order for ASUS M3N-H/HDMI GeForce 8300 with an 4850e Its ATX (though most of the adds wrongly mark it matx) and has the 3PCI slots that I might need. At a pinch I could have got away with the 2 PCI slots, but this gives me more choices for the future, and in anycase I have moved to an Antec 300 midi tower...
Well Ive just put in an order for ASUS M3N-H/HDMI GeForce 8300 with an 4850e Its ATX (though most of the adds wrongly mark it...
I have been working with MP for about a year now, with a 1.8G Athlon and NVidia 7600GS card with Vista and would like to upgrade my...
Replies
11
Views
3K
>click<
>click<
Hi guys I want to upgrade my old AMD64 x2 4200+ CPU becase, When i want play a big ass 1080p rip ( 9~15 gigabyte). Al i get is...
Replies
11
Views
2K
cheers for these guys ill look into them
cheers for these guys ill look into them
i've had a look around and couldnt find anything doesnt need to be stat of the art, just have support for lots of SATA ports, and...
Replies
12
Views
4K
Have you already tested?
Have you already tested?
I am looking to buy the following to upgrade my HTPC. Asus P8H61-M Pro Rev 3.0 Motherboard Intel Celeron G530 Processor...
Replies
12
Views
5K
Athlon II x2 235e For anyone interested in these energy efficient parts: I have recently installed an Athlon II x2 235e (2.7GHz) as a replacement for the 4850e. It is running well for full HD TV (1080i). No post-processing has been applied as I think the PQ is fine as is. It was detected by the motherboard (BIOS rev F4) and...
Athlon II x2 235e For anyone interested in these energy efficient parts: I have recently installed an Athlon II x2 235e...
For those in the process of building / considering build options, AMD has just released a new range of energy efficient CPU's which...
Replies
13
Views
5K
antec 2480 my mistake. only recommend bc it is cheap and included psu.click nz wiki in my sig goto hardware bit that is what i recommend. its fast cheap best value.ps. they are nz price. if u want power efficency then need gold psu. the i3 3225 uses 10w less but cpu and mobo will cost more than amd.
antec 2480 my mistake. only recommend bc it is cheap and included psu.click nz wiki in my sig goto hardware bit that is what i...
Hi all I'm very new (2 days) to having media portal running on my current tower machine and I must say I like it the overall...
Replies
13
Views
3K
When I moved into this flat I swore I would get a large TV. 2 years later I still have my ex-wife's 19" TV in a 22'x12'. To be fair I did spend most of a year working away so I spent a very little time at home. Now I am back in the area on an extended basis I will probably get that nice TV I have been wanting.
When I moved into this flat I swore I would get a large TV. 2 years later I still have my ex-wife's 19" TV in a 22'x12'. To be...
The video section of my Gigabyte GA-MA78GM-S2H is beginning to fault, so I'm looking for a replacement micro-ATX that can use the...
Replies
13
Views
3K
Yeah that s a good point :D
Yeah that s a good point :D
Hi everyone, I am soon gonna build a new HTPC. I have been getting infos on the web for quite sometimes now. Until now there was...
Replies
13
Views
3K
1gkar - I can see the boot up/post screen on my TV. Yes, I do have to reset the flicker filter everytime I reboot! My telly is connected via s-video. I tried to connect it via component input. I get the POST screen but as soon as the driver loads in XP the screen goes all fxxed. Gave up and have gone back to s-video. Have you got...
1gkar - I can see the boot up/post screen on my TV. Yes, I do have to reset the flicker filter everytime I reboot! My telly is...
Is there one? Ive just replaced my DFI RS482 (socket 939) when I got sick of the random reboots ( known issue for this MB according...
Replies
13
Views
5K
OK i don't know what the server must do?
OK i don't know what the server must do?
Hi Guys, I am just putting together my dedicated TV Server, and I really am struggling to get this thing even booting up. :cry...
Replies
13
Views
3K
Erm - you might want to read the post date for the last post - You just resurrected an oldie :D I would guess that the OP bought a new card in the intervening 9 months... lol
Erm - you might want to read the post date for the last post - You just resurrected an oldie :D I would guess that the OP bought a...
I have finally decided to upgrade my HTPC, but I do not know which way to go regarding onboard graphic or not. Option 1: Buy a...
Replies
14
Views
6K
Even though it seems like overkill, the cost is such now that there's not much point going much lower. £37 is what I paid. And that's the lowest AM3 cpu I could find. Should be able to fiddle with ffdshow without strain. Or have it running more or less as idle and keep the temp and power down. Anyhow, all arrived and waiting to...
Even though it seems like overkill, the cost is such now that there's not much point going much lower. £37 is what I paid. And...
I'm going to upgrade the insides of my HTPC. Seven years old now so I think it deserves it. Seven years ago was about the last...
Replies
14
Views
4K
As I said before, most probably Vista uses a different method. Something like a Level 2 page file. As I said before, these things have limited R/W times, so R/Wing ita few thousands times per day probably means they just have a few months to live. As I said before USB sticks are terribly slow. As I haven't said before (be I thought...
As I said before, most probably Vista uses a different method. Something like a Level 2 page file. As I said before, these things...
I'm considering upgrading my system (see specs on left side) from 512MB to 1GB, while there stillis DDR(1) on the marked (even if...
Replies
14
Views
3K
Asus M2A-VM (HDMI) has a module that will output HD video and audio. For composite it uses an svideo to composite adapter. For audio it uses an S/PDIF connection. I'm sure that there are others out there that will be similar
Asus M2A-VM (HDMI) has a module that will output HD video and audio. For composite it uses an svideo to composite adapter. For...
I currently have a HTPC up and running for about a year now, but its build from old parts and feeling its age. I'm looking to...
Replies
14
Views
4K
Harr harr ... first post covers it :P
Harr harr ... first post covers it :P
Hi Folks, I have a MB GA-MA78GM-S2H and it seems like I cannot get Hardware acceleration to work. Can any of you fine people...
Replies
14
Views
4K
Top Bottom