WebEPG (4 Viewers)
everything related to WebEPG in here
TV Movie - Clickfinder
everything about the TV Movie - Clickfinder plugin
xmlTV (6 Viewers)
everything related to xmlTV in here
No need to apologise. I hope you find the SD support team receptive and helpful. :)
No need to apologise. I hope you find the SD support team receptive and helpful. :)
With the 75th anniversary of Pearl Harbor now very close at hand, I naturally checked the program schedule of my local public...
Thank you, in the meantime, it got resolved by help from an developer - it turns out that EPG language is not critical (like for audio channel)
The problem was made by me, by having enabled EPG for too many channels(transponders) - never letting it finish.
Thank you, in the meantime, it got resolved by help from an developer - it turns out that EPG language is not critical (like for...
now and then , I need the edit the mediaportal.xml to make Norwegian audio default for DVB-S - because the GUI does not allow me to...
For anybody reading this thread in future...
@Jasmeet_181 was right. The full EPG for all Canal Digital Nordic channels is available from transponder 11216 V. You can configure the DVB EPG grabber as follows:
Open TV Server Config.
Go to the tuner list. (Expand the TV Servers section, then select your server.)
Ensure EPG grabbing is...
For anybody reading this thread in future...
@Jasmeet_181 was right. The full EPG for all Canal Digital Nordic channels is...
I did a transponder/channel scan enabled grabbing for every channel. (like before)
Still - barely getting current+next program.
I...
I'm currently working on a very simple command line application that works like this:
list all channel ID's with names and providers:
c:\epgcopy.exe -list
then you can use the following command in a batch file:
c:\epgcopy.exe SourceId TargetId
I'm currently working on a very simple command line application that works like this:
list all channel ID's with names and...
Hi there,
I would like to copy programme info from one channel to another.
My provider has no EPG for some HD channels. However...
Great - the freesatinfo channel did the trick. Thanks!
Only bbc2 doesn't have the full epg, but I'll double check in a day or so and use the webgrab if it hasn't updated.
I vaguely remember the radio channel solution, but couldn't find reference to it anywhere - i now realise i'd just overlooked it though...
Great - the freesatinfo channel did the trick. Thanks!
Only bbc2 doesn't have the full epg, but I'll double check in a day or so...
Hi,
I have a dual DVB S card with LNBs picking up 19.2E (German) and 28.2E (UK). After a re-install due to another problem, I can...
Thanks MM.
Passed your info on to the Honeybee developer and he fixed the issue already.
Its been a while since i have been on the forum needing your help but your support is awesome as always!
Thank you :)
Regards
Jacob
Thanks MM.
Passed your info on to the Honeybee developer and he fixed the issue already.
Its been a while since i have been on...
Hello,
My current XML provider is no more so I am switching to a new one. Honeybee.it
The problem is that Mediaportal errors out...
What you've described here sounds like Windows preparing for an automatic update and/or reboot. As you are no doubt aware, Windows 10 does install updates automatically. I don't use W10, but I'm told automatic updates can be prevented via the registry or a config policy.
Yep, sure. Whatever works best for you. :)
What you've described here sounds like Windows preparing for an automatic update and/or reboot. As you are no doubt aware, Windows...
Hiya, I'm using MediaPortal v1.8.0, DVB-T, Windows 8, TV EPG Grabber, in the UK.
Had to retune recently and where i can now view...
Please see http://forums.schedulesdirect.org/viewtopic.php?f=15&t=2841 for details.
Please see http://forums.schedulesdirect.org/viewtopic.php?f=15&t=2841 for details.
Please see http://forums.schedulesdirect.org/viewtopic.php?f=15&t=2841 for details.
UPDATE:
Via checking the log files myself, I saw that when the EPG refresh was working, an event was logged for each time the grabber started and stopped. However after it apparently stopped working, no events of any kind were logged - even when I clicked the button to manually refresh.
I still have no idea what caused this.
Anyway...
UPDATE:
Via checking the log files myself, I saw that when the EPG refresh was working, an event was logged for each time the...
Dear MediaPortal experts,
I use MediaPortal TV server as a back-end to Kodi. Until yesterday, it was working almost fine (I...
Hi thanks for replying. I've got it sorted now. I have 2 tv cards in the pc now one of which has seperate drivers from dvbt and dvbc. When I uninstall ed both drivers and just reinstalled the dvbt ones it worked straight away without me changing any settings at all. Bit of a where'd one but very happy that it seems to be mostly...
Hi thanks for replying. I've got it sorted now. I have 2 tv cards in the pc now one of which has seperate drivers from dvbt and...
hi guys I'm trying to get epg via dvb-t and for the life of I cant get it working. when I tested the card I tested on win7 and I'm...
Possibly. TVE 3.5 reads and stores the credits and other info. Front-end display will need to be done by somebody who is more comfortable with user interfaces than I am.
Possibly. TVE 3.5 reads and stores the credits and other info. Front-end display will need to be done by somebody who is more...
I have my xmltv feed (which since the demise of Atlas I now use webgrabplus and tvguide.co.uk)
I cannot see an answer as to if...
The UK Freeview 'off air' EPG covers 7 days ahead - and once you've set it up, basically it 'just works'. If you are concerned that 7 days might not be enough to cover holidays etc., why not use something like the (TV server) 'TV Wish List' plugin with it, which can automatically schedule recordings based on searches of the EPG data...
The UK Freeview 'off air' EPG covers 7 days ahead - and once you've set it up, basically it 'just works'. If you are concerned that...
Hi all...
Sorry for being such a noob to this but I have spent two weeks on this so really need some help...
I have set up media...
The option you enabled to get that was as in the attached but that is only to display the data the exists, the source you setup for epg would be supplying the episode info.
The option you enabled to get that was as in the attached but that is only to display the data the exists, the source you setup for...
Hi....
Webepg went haywire yesterday......so tried xmltv.
Radiotimes grabber appears to have gone, and digiguide needs...
Great! :)
Always pays to ask for help around here. We're pretty friendly and can save you a lot of time.
Great! :)
Always pays to ask for help around here. We're pretty friendly and can save you a lot of time.
Not sure if this should be posted under general support, but this seems like the right spot.
I've had MP running smoothly for some...
Thanks mm, I'll take it up witH Steve over at EPGCollector.
Thanks mm, I'll take it up witH Steve over at EPGCollector.
My issue is TV server only shows movies or series as Genres.
I pull my EPG thru EPG collector and it pulls more than 1 category...
I did read that. Now its all working again properly i havnt had to adjust timezone compensation, it is being read off the tvguide file which is great.
I did read that. Now its all working again properly i havnt had to adjust timezone compensation, it is being read off the tvguide...
Hello, i have been having so much fun with the epg, if i use xmltv its out by 12 hours. fixed the problem but now mp1 wont import...
THX all working now. SUPER!!!!
THX all working now. SUPER!!!!
Hi All, had lots of problems since the install of MP1.6 from MP1.5->1.6 pre-release. Have now uninstalled MP in its entirety and...
I have now reinstalled Windows 7 and Mediaportal 1.5.0 Final
Its all set up again with DVB-T2 working with EPD from Hauppage USB receiver, however I still have the same prob with DVB-S2 and no Freesat EPG and no Freesat channels - only Sky channels, FTA ones that I can't watch. There is one exception and that is Channel 4 HD. I can...
I have now reinstalled Windows 7 and Mediaportal 1.5.0 Final
Its all set up again with DVB-T2 working with EPD from Hauppage USB...
Trying to get Freesat working with Hauppage Nova S2. Its proving to be the typical nightmare associated with this sort of project...
Decided to go the xmltv route. Bought mc2xml. Works great for all of my OTA channels.
Decided to go the xmltv route. Bought mc2xml. Works great for all of my OTA channels.
Been using webepg with the US grabber from IMDB with great success. But recently cut the cable cord and am going OTA for my TV...
Yes, that's correct. The sub-title tag is also called the episode name. MediaPortal can be configured to display episode details:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/MediaPortal_Configuration/22_TV/1_TV_Client#Show_episode_info
If you configure MP to show the episode title (or number + title) then...
Yes, that's correct. The sub-title tag is also called the episode name. MediaPortal can be configured to display episode details...
I'm currently using zap2xml for my tvguide.xml. The issue i'm having is that even though Mediaportal is displaying the EPG...
The latest version based on 1.13.0 is here but there are some reports of possible problems, 1.12.0 is here, there's some more information and links in the first post of that thread.
The latest version based on 1.13.0 is here but there are some reports of possible problems, 1.12.0 is here, there's some more...
One reason I used to use WMC over MP is the ease of use, it just worked (although MP is more flexible and advanced). Here's what I...
Sorry, I don't know Dave. I'm based in New Zealand so have never had cause to use zap2xml. The zap2xml home page does say:
...so I'd guess that it's able to identify and mark such programs in some way. mc2xml has a similar option.
Sorry, I don't know Dave. I'm based in New Zealand so have never had cause to use zap2xml. The zap2xml home page does say:
...so...
I've been using the donator mc2xml & xmltv to get my EPG from MS.
Unfortunately, I haven't had any updates for about a week. My...
Hello and welcome Tmcca
The SD plugin doesn't work very well with cable setups like yours. I recommend you grab your data with mc2xml + XMLTV:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/13_Setup_Guides/2_TV_Setup/4_TV_Guide_Setup_%28EPG%29/XMLTV_mc2xml
Hello and welcome Tmcca
The SD plugin doesn't work very well with cable setups like yours. I recommend you grab your data with...
I just installed Mediaportal 1 and using schedules direct plugin. I am using HDhomerun Prime and lost on why I am not getting the...
Been away from DOS too long :)
Sorry bout that.
Thanks Again!
Been away from DOS too long :)
Sorry bout that.
Thanks Again!
So, it's great that this plugin allows me to customize the "channel name format" as it appears in the guide, however, it doesn't...
Thanks for the tip re Freesat info, just installed MP and my epg was not populating, its not complete by any means but it does look like its moving forwards. see how it goes over the course of the day.
Thanks for the tip re Freesat info, just installed MP and my epg was not populating, its not complete by any means but it does look...
Does anyone have a clue how to gain a full/near full EPG in the UK. Mine used to be populated but it now will not hold any EPG at...
Thanks for your help whatisk. SBS3 wasn't ticked in the list of channels the EPG is checking data for. Problem solved!
Thanks again.
Thanks for your help whatisk. SBS3 wasn't ticked in the list of channels the EPG is checking data for. Problem solved!
Thanks again.
In Australia we've just had a new FTA channel added (or new programming added to an existing channel - it was SBS3) and while I can...
I changed course a little bit and dug out a program I used a few years ago. I setup MC2XML to pull the schedules direct data and switched over to the xmltv plugin. This brings in all the Sat and local stations and I can just use the selector to assign guide channels to any that didn't get matched. I have all the local tampa...
I changed course a little bit and dug out a program I used a few years ago. I setup MC2XML to pull the schedules direct data and...
I have been setting up MP1 TV Server using a HDHomerun OTA tuner and a HD PVR connected via component to a directv Genie...
I'll go with that then - thank you for the info!
I'll go with that then - thank you for the info!
I get epg data through the xmltv plugin. The xml file has lots of extra fields, but my epg only displays title and description. How...
Thanks for your replies, my dvbs supplier seems to have fixed the problem of epg, Now all is working as before, so I dont need WebEPG oR XMLTV for the moment. :)
Thanks for your replies, my dvbs supplier seems to have fixed the problem of epg, Now all is working as before, so I dont need...
Hi, I know I'm asking alot but...
The Web epg for norway stopped working from sol.no for about a year ago. This was not that big a...
Thank you! You really know MP like the back of your hand.
So I first tried moving the DVB-S2 card to the USB3 controller, while keeping the DVB-T2 card on the USB2 controller.
Unfortunately that didnt work.
I then set your suggested "All card to be Preloaded" and managed to get both cards streaming at the same time. Tested various...
Thank you! You really know MP like the back of your hand.
So I first tried moving the DVB-S2 card to the USB3 controller, while...
Hey,
I have been using MediaPortal for some years, mainly with DVB-T and then DVB-T2 tuners.
Recently moved into a house which...