Specific prefix :
Show all
MP2 - V2.5
MP2 - V2.4.1
MP2 - V2.4
MP2 - V2.3.2
MP2 - V2.3.1
MP2 - V2.3
1.25.0
[solved]
You can find the „view mode“ in menu and you can select
Grid view
List view
Cover view
Last option is what you look for think. But I’m not sure 100% what you mean with carousel, could be Ebdless navigation or animated coverflow.
In WMC skin you have further options in skin settings to switch in grid view between poster, banner and...
You can find the „view mode“ in menu and you can select
Grid view
List view
Cover view
Last option is what you look for think...
Hi all,
Sorry its probably really obvious. I havent used Mediaportal for about 10 years, but I am building a new HTPC as my...
Hi,
Waking the deads...
I have a TBS DVB-T2 6281SE card (Windows 10/64). I live in Israel where T2 is broadcasting in multy PLP mode. Is this option updated in either MP1 or MP2?
Hi,
Waking the deads...
I have a TBS DVB-T2 6281SE card (Windows 10/64). I live in Israel where T2 is broadcasting in multy PLP...
Hello, dear friends.
Who faced with the problem of scanning TV channels mode DVB-T2?
Means channels transmitted in multi PLP, PLP...
Hi, yes that was the first solution I tried, but after 3 days running (installed on my HTPC and not being used for anything else) it still only managed to index about 20% of my files and the MP2 server seems to be practically unusable while updating media sources.
I appreciate MP2 is still being worked on so can understand there'll be...
Hi, yes that was the first solution I tried, but after 3 days running (installed on my HTPC and not being used for anything else)...
Hi,
Is it possible to have one MP2 server managing my local media and another separate MP2 server handling TV service...
MPTVScheduler can run on Android TV too but not as nice as kodi of course.
MPTVScheduler can run on Android TV too but not as nice as kodi of course.
Getting right to the point. Is MP2 going to work with an HDHomerun Extend?
I have MP1 installed on my laptop and EPG Buddy to grab...
Ok thanks Morpheus, I will have a look. I dont remember seeing an option like that in the menu but I will have another go.
Thanks again everyone for all your help :)
Ok thanks Morpheus, I will have a look. I dont remember seeing an option like that in the menu but I will have another go.
Thanks...
Hi Guys,
I have the latest MP2. I have not attached logs because I am at work. When playing any .mkv movie that has 7.1 sound in...
That solved my problem, thank you very much.
That solved my problem, thank you very much.
Scrolling through my tv series, I noticed an entry for something I have never downloaded. The entry is for “The Starry Night, The...
Reinstall got it working.
Reinstall got it working.
MediaPortal 2 won't stream TV Antenna channels. I have an HDHR Dual installed on my network and the HDHR software on my computer...
I Use MediaPortal 2.1.3 to Record TV, and the recorded TS File doesn't update(Refresh). It just stays at the same file size I have to click refresh in order for it to refresh the file size. I used to record wit NextPVR and the TS File would update(refresh), but I had to leave it running for it update. Anyone know how I can get the...
I Use MediaPortal 2.1.3 to Record TV, and the recorded TS File doesn't update(Refresh). It just stays at the same file size I have...
I Use MediaPortal 2.1.3 to Record TV, and the recorded TS File doesn't update(Refresh). It just stays at the same file size I have...
So I switched from PC/realtek->TosLink->Receiver
to PC->HMDI->TV->TosLink->Receiver and now sound works as expected.
So I switched from PC/realtek->TosLink->Receiver
to PC->HMDI->TV->TosLink->Receiver and now sound works as expected.
Hi,
I have issues when I playback mkv files in MP2.1.3.
The mkv files are created eather with MakeMKV as rips from DVD or BD with...
Yes, but it is not found:
Manual installation should solve it directly. I'm not sure, if 4.7.1 will work. MP2 expects 4.7. I checked and we have not updated yet.
Yes, but it is not found:
Manual installation should solve it directly. I'm not sure, if 4.7.1 will work. MP2 expects 4.7. I...
cant install on a new Windows 10 PC
Log is
[0E98:1734][2018-04-08T19:17:59]i001: Burn v3.11.0.1701, Windows v10.0 (Build 10240...
Ah ok it is done on the server side.. I understand. thx
Ah ok it is done on the server side.. I understand. thx
Hi,
I use MediaPortal 2.1.3 on fresh installed Win10 Boxes. After some struggeling to get the recordings viewed in the client, I...
hmm ok. I don't know what it is. It happen on all clients.. so it should be a (tv-)server problem.
hmm ok. I don't know what it is. It happen on all clients.. so it should be a (tv-)server problem.
Hi,
seems that I have found a bug in MediaPortal 2.1.3 in Slim TV Client.
If there is a multipage TV channel list and I switch to...
I don't have the code available at the moment...but I used VLC's UWP control, which has RTSP support built-in.
I don't have the code available at the moment...but I used VLC's UWP control, which has RTSP support built-in.
I'm in the beginning stages of developing a UWP (Universal Windows Platform) client for MediaPortal 2. I already managed to get...
Saw that after checking online. Thanks...
Saw that after checking online. Thanks...
Apologies if this has been addressed before - but I can't seem to find a solution...
My HTPC project has both a Hauppauge...
Was a question of finding some time ;)
Was a question of finding some time ;)
Hello,
MP 2.1.3 is not recognizing the new series "Britannia" (TvDB-ID 333644). I've now tried this several times and the episodes...
MediaPortal 2 Version: 2.1.3
Description
Please help.When trying to install it fails just after.netframework 4.5.I have attached log report hope this helps.
Thanks
Steps to Reproduce:
not sure what to write here
MediaPortal 2 Version: 2.1.3
Description
Please help.When trying to install it fails just after.netframework 4.5.I have attached...
MediaPortal 2 Version: 2.1.3
Description
Please help.When trying to install it fails just after.netframework 4.5.I have attached...
I do not see eHome Infrared Transceiver in my Human Interface Devices section (see attached image).
If that means that it is not compatible, it is probably not.
My hope that it would be easy to fix came from the fact that Windows recognizes the commands that MP2 doesn't. More importantly MP1 does. So, isn't it just a matter of...
I do not see eHome Infrared Transceiver in my Human Interface Devices section (see attached image).
If that means that it is not...
Hi,
I switched over from MP1 to MP2 recently.
I notice that Pause and Play buttons of my remote do not work anymore - I need to...
At this stage the old client came back to life :) so new client on hold
Will come back to you if things change,
Thanks for the help i the mean time
At this stage the old client came back to life :) so new client on hold
Will come back to you if things change,
Thanks for the...
Hi Sadly my trusty ancient i3 client has died.
I am looking at the Intel NUC Celeron J3455 as replacement. Any tips on how well...
Updated with the guide to install an Intel HDMI audio Device that can stream 192kHz/24bit.
If you have any question, feel free to reply here.
Updated with the guide to install an Intel HDMI audio Device that can stream 192kHz/24bit.
If you have any question, feel free to...
I switched to MePo 2 with the release of MePo 2.1.1, and in the last months I focused on learning the program and fine tuning it...
Thank you HTPCSourcer. I was thinking about this myself and thought of perhaps mentioning at the beginning of section 2.1, "Adding media sources" something along the lines of:
Note: It is not necessary to manually add a media source for TV recordings. The TV recording folder specified in the Recordings section of the MediaPortal 2 TV...
Thank you HTPCSourcer. I was thinking about this myself and thought of perhaps mentioning at the beginning of section 2.1, "Adding...
Hi All,
As the title states, I have been having problems with TV recordings in MP2 (my current setup is MP 2.1.3 Release on...
Ran one of the problem video files using MPC-HC and it played flawlessly.
Ran one of the problem video files using MPC-HC and it played flawlessly.
I just noticed that several movies were not imported into MP2. Is there a known problem with the importer? Is it a coincidence that...
Agree. My Media structure is probably very simple.
Agree. My Media structure is probably very simple.
I've decided to move up from MP1 to MP2 after 1 decade on MP1. the Media PC been used a lot less recently as we got internet TV...
I've done another afternoon of trying:
-Verified all the prerequisites are installed
-Pulled out the .msi and installed it by hand, enabling more logging.
-Everything else I could think of an/or google.
Best I can tell, the TV service *is* installed correctly, but crashes on launch. (Given whats recorded in the system Events).
This...
I've done another afternoon of trying:
-Verified all the prerequisites are installed
-Pulled out the .msi and installed it by hand...
Previous long running MP1 install. PC got scrambled so attempting to start over with MP2.
Completely clean install - Win10 Fall...
Ahh, thanks.
Weirdly though, flipping through the various tuners, they all point to "C:/Users/Public/Recorded TV"
I have found all my recordings in "C:\ProgramData\Team MediaPortal\MediaPortal TV Server\recordings\", but I don't see anything in the "Recording"-menu, that point to that.
Edit: Hmm, actually "Timeshifting > Folders"...
Ahh, thanks.
Weirdly though, flipping through the various tuners, they all point to "C:/Users/Public/Recorded TV"
I have found...
I have installed MediaPortal V.2.1.3 on my Windows 10 computer, and things seemed to work... at first.
When I enter a scheduled...
No restore point on my PC. I'll try to un-update the 2 update that came during the last Week. And also try to find an other backend for my TNT tuner for Kodi.
Thanks for your ideas.
No restore point on my PC. I'll try to un-update the 2 update that came during the last Week. And also try to find an other backend...
Hi,
Sorry for my English. I come from France.
Since my holliday return, I can't open the Media Portal 2 TV configurator. I have...
Yeah, I should have done the proper research instead of assuming now that MP2 is so far in development that it would have support for the "next gen" of cards supported by MP1. From what I gather, it is completely moot as getting the HD PVR 2 up and going on MP2 seems to be not possible.
I thought I had read that the 3.5 version...
Yeah, I should have done the proper research instead of assuming now that MP2 is so far in development that it would have support...
I apologize if this information is out there but I cannot find anything that is not nearing 3 years old.
I've been using...
MediaPortal 2 Version: 2.1.3
Description
I'm having a problem it tells me that my tv card isn't supported. What do I need to do to make it supported
Steps to Reproduce:
I can't reproduce it because it has removed my Tv Card from the list
MediaPortal 2 Version: 2.1.3
Description
I'm having a problem it tells me that my tv card isn't supported. What do I need to do to...
MediaPortal 2 Version: 2.1.3
Description
I'm having a problem it tells me that my tv card isn't supported. What do I need to do to...
Had the same problem with a Harmony remote set up as MCE. Coudn't find any better sollution than edit the default remote kay map (i posted here [solved] - How to get your iMon working with MP2 + IRSS).
Good luck!
Had the same problem with a Harmony remote set up as MCE. Coudn't find any better sollution than edit the default remote kay map (i...
I am getting double keypress most of the time when doing up and down arrows in Media Portal 2.1.3
Having hunted round various...
You won't need IMon Manager, i set it up to Plugin-Mode (no key mappings etc.) and disabled it for startup, so it's just like it's a driver simple passing through the recived signals. You just need the IMon Manager the one time for setting the remote to MCE-Compatible andfor Plugin Mode...
IRSS also won't need to detect your IMon...
You won't need IMon Manager, i set it up to Plugin-Mode (no key mappings etc.) and disabled it for startup, so it's just like it's...
Hi,
how to setup Imon + Logitech Harmony with MP2 ? In Imon remote is setup as MCE, works only few buttons: arrows, OK.
What is...
thanks!
i'm really looking forward to see this new release.
MP2 is getting better with every version.
thanks!
i'm really looking forward to see this new release.
MP2 is getting better with every version.
Hello, is there a page where I can find the changelog for MP 2.2?
I have some questions regarding User management, trakt and TVE...