Having trouble installing or configuring MediaPortal?
Yeah, changing the volume would change the bit-stream, so by definition it wouldn't be bit-streaming.
Unless you have a full receiver with audio processing capabilities that can only be applied to a digital stream, there probably isn't a whole lot of benefit to bit-streaming for you.
Yeah, changing the volume would change the bit-stream, so by definition it wouldn't be bit-streaming.
Unless you have a full...
Hello everyone,
I just got a Vizio S4251w-B4 system and have it connected to my HTPC via the motherboard optical port (Toslink)...
Hmmm, okay - thanks.
Did you manage to upload that recording?
Hmmm, okay - thanks.
Did you manage to upload that recording?
I am trying to install an EMUZED MAUI I card on a computer running XP SP3 and MediaPortal 1.4. MediaPortal produces clear video but...
Hi there,
I had a similar issue (a year or two back), where I moved cards/motherboards - TVserver reported unknown cards and showed the new ones (like with yours), but TVserver just wouldn't play ball (don't think it was crashing, just wouldn't tune/map correctly - struggling to remember)
My cards were DVBS not DVBT. I found...
Hi there,
I had a similar issue (a year or two back), where I moved cards/motherboards - TVserver reported unknown cards and...
I was running Mediaportal 1.5.0 under Windows 7 64-bit and everything was working. Then I upgraded to a new motherboard and CPU...
I don't know why it's failed, but use something like 7-zip to unpack the installer file. Inside the 'Deploy' folder are the individual Tv-server and MP installer files - just run 'package-tvengine.exe' to install TV-server.
I don't know why it's failed, but use something like 7-zip to unpack the installer file. Inside the 'Deploy' folder are the...
I installed from 1.5pre to final. TV server wasn't working so I uninstalled and ran reinstall. There is no TV Server option. Help?
Thanks guys.
I didn't realise that you could get H.264 in an MPEG-2 container so that may answer one question.
This is a new install on my recording machine, so I only have limited time slots to do any work on it, before I need to clean it up for recording.
I've cleared the AV problem so I'm no longer running at 100% cpu. :)...
Thanks guys.
I didn't realise that you could get H.264 in an MPEG-2 container so that may answer one question.
This is a new...
Hi guys
I've borrowed a friends DVB-S2 USB box while he is on holiday to see whether I want to buy one for myself, at the moment...
Since yesterday I have now the DD Cine S2. Works like a charm. Installed the driver, configered the tuners in MP, mapped the existing channels. And it works. Tried both the stress test with several hundred tunings and also concurrent recordings and live tv. Also tested after standy (without service re-init and no wait to detect...
Since yesterday I have now the DD Cine S2. Works like a charm. Installed the driver, configered the tuners in MP, mapped the...
Hi,
I am trying to run MediaPortal with a Cinergy S2 PCIe _Dual_. Both tuners show up under the cards tab in TV server config but...
The AMD Radeon drivers were missing and causing the Direct3D error.
The AMD Radeon drivers were missing and causing the Direct3D error.
MP1.5 In a fresh installation with Win7 I can't get MP to start at all.
A few things should be noted
During initial testing and...
I sorted it out. Somehow all my LAV Audio settings was gone for some reason.
I sorted it out. Somehow all my LAV Audio settings was gone for some reason.
I have configured my MP setup so that when I watch TV the sound comes from the TV and when I play a movie, the sound comes from my...
Please fill in your system spec's in your profile and
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files
Please fill in your system spec's in your profile and
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files
Hey everybody! :)
I had a big Problem with my Media Portal,
I used it already for looking DVD's and so on, now I bought a TV -...
No. :)
Yes, that is always recommended.
Also, don't forget to stop the TV service before upgrading, and check for plugin updates immediately after updating.
No. :)
Yes, that is always recommended.
Also, don't forget to stop the TV service before upgrading, and check for plugin updates...
Hi,
I have a rock solid MP 1.2.2 system , a multi-seat with one server and five clients. I'mconsidering an upgrade (I know, if it...
Perfect :-) I've now got a full ESXi virtualised setup and I am slowly setting up MP again and I want to make sure it is all correct.
Perfect :-) I've now got a full ESXi virtualised setup and I am slowly setting up MP again and I want to make sure it is all correct.
Hi,
I Have successfully installed 1.3 Beta on Windows Server 2012 however when I run the TV Server Configuration I get an empty...
Thank you for your reply, i am experimenting with various software and i am trying the patch, in some applications like Tbsviewer i can get the encrypted channels to play.
The biggest problem for now is that i can't get the right channels from the right satellites; if i configure the mp tv server to scan for channels on #2 Level1AB...
Thank you for your reply, i am experimenting with various software and i am trying the patch, in some applications like Tbsviewer i...
Hi all, i am looking to use Mediaportal but i need some assistance, i will try to write as much details as i know but if i forgot...
Hi there,
Running MP 1.5.0 on Windows 7 (latest updates). Using an MCE-like remote (HA-IR01SV) to control Mediaportal.
The button mapping is done using EventGhost and uses their MediaPortal config file. The problem I've had since version 1.3.0 is that it still double clicks - that is, a single click on the remote is interpreted...
Hi there,
Running MP 1.5.0 on Windows 7 (latest updates). Using an MCE-like remote (HA-IR01SV) to control Mediaportal.
The...
Hi there,
Running MP 1.5.0 on Windows 7 (latest updates). Using an MCE-like remote (HA-IR01SV) to control Mediaportal.
The...
I think that the best way will be to try... ;-) I will let you know!!!
I think that the best way will be to try... ;-) I will let you know!!!
Hello everyone,
I am running windows 8 with MP 1.4. I am using the LAV audio decoder 0.58.2. I have a sound system (5.1) that is...
Let's see. I will observe in the next days....
thanks for late night support
:)
regards
flintstone
Let's see. I will observe in the next days....
thanks for late night support
:)
regards
flintstone
Hi.
installed the 1.5 stand alone TV server on a new machine with Windows 8. Manually installed MS-SQL2008, as the clients were...
@mm1352000: Well, it finally crashed again and it looks like the log files are to blame. I've attached a zip file, but the MediaPortal log file was ~2.5GB in lengths and only got round-robined when I rebooted.
I have now downgraded the logging to errors only, but somewhere along the line my installation must have gotten corrupt - the...
@mm1352000: Well, it finally crashed again and it looks like the log files are to blame. I've attached a zip file, but the...
I am encountering an odd problem, with the following symptoms:
I watch videos on MP of an evening. When I am done, I turn off the...
Hi
Way I do it, enable RDP on your laptop [lots of links where you can find how to make it possible - look up termserv.dll].
Once you have RDP enabled, on laptop create another account, and enable it for remote access - this will be your RDP management user.
RDP into laptop as management user. You now have full access to a desktop...
Hi
Way I do it, enable RDP on your laptop [lots of links where you can find how to make it possible - look up termserv.dll].
Once...
Hi there,
I have been using media portal for a couple of years now as an interface to watch my media.
I am currently using an old...
Okay - happy to go with that. :)
[I note that TeamViewer also doesn't require any install or config and is free for private use.]
I've just flicked you a PM to arrange. Let me know if you don't see it or have trouble replying.
Okay. Looking forward to getting onto the server as this is shaping up to be a good challenge/learning...
Okay - happy to go with that. :)
[I note that TeamViewer also doesn't require any install or config and is free for private use.]...
Hey Everyone,
I had a couple of basic questions about settin gup 1.5 with Cable Card tuners. I have my cable card tuners working...
Yes.
Yes and no. If they really are only speakers then yes; however if they have any sort of processing in the pre-amp phase then it may make sense to do a A->D conversion for processing, then do D->A before amplification, then finally send the signal to the speakers.
Exactly.
In general, you want to:
Minimise the number of A->D...
Yes.
Yes and no. If they really are only speakers then yes; however if they have any sort of processing in the pre-amp phase then...
Hello everyone.
I'm running media portal 1.4 on a Windows 8 x64 pro machine and am thinking of changing my speaker set up. Now I...
Solution found here.
Solution found here.
After I have upgraded to v1.5 I am not able to select any button in media portal. I am in Titan Extended. While pressing left or...
I'm very happy to have been able to assist. :)
Any other questions, please don't hesitate to ask... :)
I'm very happy to have been able to assist. :)
Any other questions, please don't hesitate to ask... :)
I am currently running MP 1.5.0 under Win 8 (had same problem under MP 1.4)
My tuners are:
1x TBS6982 PCI-E DVB-S2 Dual Tuner...
Switching from MPAR seems to have done the trick!
Went for a new install...and this time, created new settings from scratch....and Bingo, all is fine.
Can't help thinking that importing settings from an earlier install was contributing to the problems I experienced?
Thanks again:)
Switching from MPAR seems to have done the trick!
Went for a new install...and this time, created new settings from scratch....and...
Hi
Finally managed to install MP on my new WIN8 OS....but problems are present, and some help would be appreciated!!
1. TV...
If you are still finding it difficult at adjust then visit this website http://sydneyantennas.com.au/
If you are still finding it difficult at adjust then visit this website http://sydneyantennas.com.au/
Hi guys,
Can an old rusty Digital TV Antenna on the roof cause signal glitches? For example you are watching live tv and every say...
Hi all, thank you, it works...
For Signature problem you can install the original digital signed driver, after that remove this folder from registry, it works for me :D...
Hi all, thank you, it works...
For Signature problem you can install the original digital signed driver, after that remove this...
Hi,
I have problem with Prof8000 DVBS card with Mediaportal 1.5.0 RC1 under Windows8 professional:
I use new...
Hi,
I have updated to MP 1.5 and run the fix mentioned above. I can confirm that it works fine for me. I get the actors data etc and the Fanart as expected.
Well done to those who worked on this fix.
Now, in MP 1.5, I need to tackle the TV issue from Resume, as it has returned - patches fixed it in MP 1.3. I have run an update...
Hi,
I have updated to MP 1.5 and run the fix mentioned above. I can confirm that it works fine for me. I get the actors data etc...
Hi,
I recently updated to MP 1.4 from MP 1.3. I have a movies database of approx. 194 videos - mostly MKV. In the Videos (MyVideo)...
If you want to be safe, you can make a copy of your C:\ProgramData\Team MediaPortal\MediaPortal folder.
The .xml files in there contain the settings for MediaPortal Config (MediaPortal.xml) and the plugins you have installed.
Titan.xml should contain your Titan settings.
If you want to be safe, you can make a copy of your C:\ProgramData\Team MediaPortal\MediaPortal folder.
The .xml files in there...
Hi,
I am about to update to 1.5.0 but now I have a question.
I did some changes to Titan using TitanEdit.
Now the installation...
Wow, that was quite a while ago.
IIRC, when I didn't receive a reply, I backed up my computer and went ahead and installed anyway. Best of my recollection, nothing was effected. DirectX does not allow "downgrades", so either the installation failed or Media Portal simply refused to work upon installation.
Either way, I never got it...
Wow, that was quite a while ago.
IIRC, when I didn't receive a reply, I backed up my computer and went ahead and installed anyway...
MediaPortal Version: 2.0.3
Windows Version: 64bit Win7 Home
CPU Type: Phenom X4
When I go to install MP, it "detects" that...
Well things have now moved on a bit!
I uninstalled everything...and removed associated data files. After a restart....instal proceded (MySQL 5.1 installed successfully this time) and everything looked good!!
So thanks to all ...Vasilich, MM1352000 and JimCatMP for help in getting me off the ground.
Unfortunately....there are now other...
Well things have now moved on a bit!
I uninstalled everything...and removed associated data files. After a restart....instal...
When trying to enter TV server config.....my hostname and dependency are both highlighted RED...and no connection can be made to...
Indeed, very strange! I've seen similar threads before so I don't doubt that there was a problem, but like you I have no idea what the problem was. :S
Oh well! :)
Indeed, very strange! I've seen similar threads before so I don't doubt that there was a problem, but like you I have no idea what...
I currently run 1.3 and it works well. im doing a new system build, and am looking at 1.5 pre release to install on my new...