Installation, configuration support (68 Viewers)

Having trouble installing or configuring MediaPortal?
Logs would certainly tell more...
Logs would certainly tell more...
After fresh install....Moving pictures finds only 3 films (out of 300)...and MP-TV Series can't find anything. I'm pointing at the...
Replies
1
Views
751
MP1 MP2 Cannot Edit Home DE
Hey All, I've been trying to edit the order of all the icons in home, however I've not been able to. I go to the "Home" plugin in configure, and change the order as required, click okay and when i reopen mediaportal (1.15), the order hasn't changed. I thought, okay, perhaps it requires can't exceed 12 icons (2 pages) so I tried...
Hey All, I've been trying to edit the order of all the icons in home, however I've not been able to. I go to the "Home" plugin in...
Hey All, I've been trying to edit the order of all the icons in home, however I've not been able to. I go to the "Home" plugin in...
Replies
0
Views
1K
It's not only the TV Server, it's all MP2. Every view in MP2 GUI is getting data from the database. So you will slow down MP2 a lot by using MySQL... If the MySQL server isn't on the same machine as the MP2 server this will be even more worse. A really, really bad idea. You better modify your scripts on the linux server for that...
It's not only the TV Server, it's all MP2. Every view in MP2 GUI is getting data from the database. So you will slow down MP2 a lot...
Hi guys, please I need help. I installed new MP2, but I need config tv database to another machine with mysql database. I need that...
Replies
3
Views
3K
MP1 MP2 Preview not working DE
Man, thanks a bunch, very helpful. Seems most of my problems were due to mediaportal 2 not uninstalling correctly. Got everything set up on the front end with kodi as well. Love it so far, thanks again for your help.
Man, thanks a bunch, very helpful. Seems most of my problems were due to mediaportal 2 not uninstalling correctly. Got everything...
I just installed version 1.15. My tuner is a hauppauge 955q usb. Using the wintv8 software, I can tune all my ota channels. I'm...
Replies
2
Views
2K
Hi, updated:now I got a new m3u list and it does not crash the configuration anymore, but it shows full signal and full quality, but it does not add any channel. Updated the appended files. old: unfortunately when channel scanning my Triax with the m3u from the upload the Server Configuration crashes. Can anybody please help...
Hi, updated:now I got a new m3u list and it does not crash the configuration anymore, but it shows full signal and full quality...
Hi, updated:now I got a new m3u list and it does not crash the configuration anymore, but it shows full signal and full quality...
Replies
0
Views
2K
Hmmm, let's just back up the truck for a moment... Are you throwing away the previous install, or...? ...and are you aware that MediaPortal is a client + server software? In other words, it may be possible for you to install MediaPortal [client only] on this other computer, and have it get TV via the first PC which you already...
Hmmm, let's just back up the truck for a moment... Are you throwing away the previous install, or...? ...and are you aware that...
I am super frustrated. I cannot seem to figure out how to get my tuners to scan channels successfully. I have tried on two...
Replies
19
Views
5K
MP1 MP2 LNB LO Frequencies DE
Ahhh, brilliant. :) One reply is hardly trouble. I'm happy to have been able to offer advice. :) Any time! See you around... :)
Ahhh, brilliant. :) One reply is hardly trouble. I'm happy to have been able to offer advice. :) Any time! See you around... :)
Hello, I have had to make a change or two here with my system and it seems to have really hosed the entire workings! Previously I...
Replies
4
Views
1K
Mmmm, that is indeed odd. I have no explanation, but I recommend sticking with QAM standard going forward. That's the right plan for almost everybody. Ahhh, we learn something new everyday. :)
Mmmm, that is indeed odd. I have no explanation, but I recommend sticking with QAM standard going forward. That's the right plan...
Trying to set up an HDhomerun tuner with windows 10, using all of the same settings that worked under windows 7. I'm unable to...
Replies
3
Views
4K
Kodi was in place and working fine, after I installed MediaPortal. But good point, I could try a restore point. I'm a senior computer systems engineer so appreciate your points. To be honest, I'm starting to sound like one of my customers lol. --- Post updated --- Like you say It was a great help you suggesting a restore point...
Kodi was in place and working fine, after I installed MediaPortal. But good point, I could try a restore point. I'm a senior...
Hi, I have just installed this USB Freeview (HD) TV Receiver into my Windows 10 PC. Initially it worked ok but then stopped...
Replies
10
Views
7K
Please report your findings as false positive to the virus scanner companies. Procedures how to do this will differ. For Microsoft Defender use this page (Microsoft account is required): https://www.microsoft.com/en-us/security/portal/submission/submit.aspx
Please report your findings as false positive to the virus scanner companies. Procedures how to do this will differ. For Microsoft...
Hi, I am getting the Message that a Ransomware has been found by Windows Defender, see attached screenshot it says it for...
Replies
4
Views
6K
I've just upgraded to MP 1.15 and now cannot launch MP using the green button as I could before the upgrade. I've checked the 'AutoStart MP Tray' box within 3rd party checks but it still won't launch. I'm using Win10 64bit. Thanks Note: I've just noticed another thread about Windows Defender detecting MPTray.exe and MusicShareWatcher...
I've just upgraded to MP 1.15 and now cannot launch MP using the green button as I could before the upgrade. I've checked the...
I've just upgraded to MP 1.15 and now cannot launch MP using the green button as I could before the upgrade. I've checked the...
Replies
0
Views
942
Mine - reports as 2% per step [not exact 2% by value but near - recall I wrote a 1 liner to generate the list].. 0, 128, 256, 768, 1024, 1500, 2048, 2599, 3072, 3599, 4095, 5120, 6144, 7168, 8191, 9216, 10240, 12287, 13500, 14336, 16383, 18432, 20479, 22528, 24575, 26624, 28671, 30720, 32767, 34816, 36863, 38912, 40959, 43008, 45055...
Mine - reports as 2% per step [not exact 2% by value but near - recall I wrote a 1 liner to generate the list].. 0, 128, 256, 768...
Hello, Recently I upgraded from MediaPortal 1.12 to 1.15. Previously the volume would go up by 2% on each click and it was not...
Replies
1
Views
851
Wonderful! :) I'm glad to have been able to help.
Wonderful! :) I'm glad to have been able to help.
Hi, I get a Microsoft.Net error when launching config. This prevents me from making any changes in config at all. See attached...
Replies
7
Views
2K
Hi bobba I'm sorry to say that we can't help you because of this: https://forum.team-mediaportal.com/threads/mdapi-softcam-support-again.12620/ If you can reproduce the problem without that plugin using unencrypted (free to air) channels and provide log files then we'll be happy to try to assist. Regards, mm
Hi bobba I'm sorry to say that we can't help you because of this...
Hi, I'm running the following system: Win10 PC with MediaPortal 1 latest version installed. MDAPI+ installed for CAM access...
Replies
1
Views
2K
For people reading this thread in future... After I had configured GlamRockCowboy's system, he had subsequently installed and/or activated the SchedulesDirect plugin. The SchedulesDirect plugin had created a whole lot of analog channels (as per its default config) which are untunable for a CableCARD tuner. GlamRockCowboy was trying to...
For people reading this thread in future... After I had configured GlamRockCowboy's system, he had subsequently installed and/or...
After MM and I FINALLY got MP 1.15 up and running, I thought my troubles were over. WRONG!! Now there are several channels I...
Replies
3
Views
2K
Thanks again MM. You fixed my problem areas. Now I am going to start working on getting IRSS installed and running.
Thanks again MM. You fixed my problem areas. Now I am going to start working on getting IRSS installed and running.
I am trying to view my analog channels. They are all shown on the MP guide, but they will not tune in. There is one channel on...
Replies
4
Views
2K
Message sent. :) [edit: To be clear, I've said what to do in the private message that I sent.]
Message sent. :) [edit: To be clear, I've said what to do in the private message that I sent.]
Hi, New to MediaPortal. I'm aware this error is a popular one. I've read through many previous posts on this. I've tried the...
Replies
4
Views
2K
Thanks for your further thoughts on the problem. To clarify the n/w issue. After the upgrade none of the other machines on the network were able to resolve the network name of the server, when you ping'd the machine by name it results in the wrong IP address being returned, one in the DHCP pool rather than the static address...
Thanks for your further thoughts on the problem. To clarify the n/w issue. After the upgrade none of the other machines on the...
Hi I updated my TV Server to W10 and have got some networking problems as a result. I'm running 1.12.0.0 My MP Client used to...
Replies
12
Views
2K
that's right - take Version 1.15pre ! ;)
that's right - take Version 1.15pre ! ;)
Just reinstalled MP and having issues getting the Music DB to completely update I get an issue every time with the above title - MP...
Replies
64
Views
11K
MP1 MP2 Unable to install DE
Thanks for your help. That worked. I have MP install and am now working on the configuration so that I get my TV stations and the guide. I'll check out other topics for that.
Thanks for your help. That worked. I have MP install and am now working on the configuration so that I get my TV stations and the...
I have attempted to install MP on a computer with Windows 8.1. The install freezes with no message. I have to end the process...
Replies
9
Views
2K
All fixed and running both local and also TV server - client (for no other reason than why not try it out !) DVB-S / DVB-S2 and local file playing thanks Bill
All fixed and running both local and also TV server - client (for no other reason than why not try it out !) DVB-S / DVB-S2 and...
I am getting the error 'unable to play:live3-0.ts'.when trying to watch TV New MP installation, as single seat, looking to use...
Replies
3
Views
2K
Hi, FilMerit also didn't start up, so i decided to reinstall Windows 10. but the the problem was still there. After few hours of searching, updating drivers etc. I finally found the course of the trouble All i had to do was to disable the "DisplayLink Audio" in the device manager and the configuration tool and FilMerit started...
Hi, FilMerit also didn't start up, so i decided to reinstall Windows 10. but the the problem was still there. After few hours of...
Hi, after installing 1.15.0 Pre Release I got the problem that the Configuration Tool keep freezing at "Adding filter section ..."...
Replies
2
Views
1K
On having opened the configuration of the plugin Home me a mistake appears. Does someone know the origin and the solution? I have reinstated MP again and it continues appearing. Thank you very much
On having opened the configuration of the plugin Home me a mistake appears. Does someone know the origin and the solution? I have...
On having opened the configuration of the plugin Home me a mistake appears. Does someone know the origin and the solution? I have...
Replies
0
Views
858
MP1 MP2 Analog Tuner Setup DE
I am trying to complete the MediaPortal TV configuration on my Windows 8.1 pc. Whenever I try to scan the analog portion of my Hauppauge tuner card my pc reboots. I am able to do the over the air input to the tuner card with no problems. My tuner card works correctly in WMC. I have uninstalled and reinstalled MediaPortal with no...
I am trying to complete the MediaPortal TV configuration on my Windows 8.1 pc. Whenever I try to scan the analog portion of my...
I am trying to complete the MediaPortal TV configuration on my Windows 8.1 pc. Whenever I try to scan the analog portion of my...
Replies
0
Views
1K
i am assuming freesat can pull in the epg thru the dish in the same way freeview does with the aerial? I am a great believer in keeping things simple and low bandwidth as my dsl connection is low grade lol I have made a point of updating the sat list before i scan as you mentioned this early on, (i am surprisingly good at following...
i am assuming freesat can pull in the epg thru the dish in the same way freeview does with the aerial? I am a great believer in...
Hi guys system is running fine with mepo 1.5 as later breaks my fav plugins so thought I would treat myself to new dvbsky tuner...
Replies
18
Views
3K
Thanks for the quick reply. That's unfortunate, but at least I won't waste more time tinkering.
Thanks for the quick reply. That's unfortunate, but at least I won't waste more time tinkering.
Hi, I can't figure out diseqc settings for my eyetv free. Whatever I set, it only scans Satellite A. I'm behind a Triax Hirschmann...
Replies
2
Views
1K
That's very kind of you. Of course, I hope I don't have to bother you.
That's very kind of you. Of course, I hope I don't have to bother you.
Hi, maybe someone can help me. I recently upgraded my MP to 1.14 from 1.12. In 1.12 all was running fine, no issues at all. After...
Replies
6
Views
1K
I'm very happy to do this. :) TV Server log files might still shed light on what happened. At this point I could only speculate that the streaming server was down, but it was started due to one of the restarts that you mentioned. Hopefully things will just work from now on it, but don't hesitate to update if the situation changes...
I'm very happy to do this. :) TV Server log files might still shed light on what happened. At this point I could only speculate...
Have been trying to use a laptop as a client to my main PC acting as server. Everything works as expected, enter server ID and...
Replies
6
Views
3K
Hallo Kolbenschieber, Danke für dein schnelles Feedback. Die Freigaberechte waren es - es funktioniert. Allerdings hat es über die Eigenschaften/Sicherheit/Benutzerrechte auch nach mehrmaligem Versuch nicht funktioniert. Erst der Rechtsklick mit Freigeben für.../Heimnetzgruppe führte zum Erfolg. Danke für deinen Hinweis Schöne Grüße Pan
Hallo Kolbenschieber, Danke für dein schnelles Feedback. Die Freigaberechte waren es - es funktioniert. Allerdings hat es über die...
Hallo Zusammen. Sicherlich schon 1000x behandelt aber trotzdem brauche ich eure Hilfe: Ich habe meinen Rechner mit Win7 neu...
Replies
2
Views
989
At me in this case works fine ...
At me in this case works fine ...
Upgraded from 1.12 to 1.14 today, updated all my plugins - MP does not start at all. Config starts fine, but when I start MP its...
Replies
2
Views
1K
Top Bottom