Having trouble installing or configuring MediaPortal?
At me in this case works fine ...
At me in this case works fine ...
Upgraded from 1.12 to 1.14 today, updated all my plugins - MP does not start at all. Config starts fine, but when I start MP its...
I think I might have got this...
I downloaded everything for use with DeployTool.
Ran the package-mediaportal.exe with a install/repair option, no backups (already had everything manually backed up)
During install, it failed due to several .dll's that couldn't be written to. Skipped and let it finish.
Failed:
log4net.dll
core.dll...
I think I might have got this...
I downloaded everything for use with DeployTool.
Ran the package-mediaportal.exe with a...
Backstory:
Had MP1 1.10 on Windows 7 - All working fine.
Upgraded to Windows 10 - Still working fine.
Upgraded to MP1 1.14 -...
Yes, I will ask you to post log files.
You tell us that the client side error message is the same as in the wiki. Fine.
...but what about the state of MySQL?
What about the state of the TV Server?
Without log files nothing can be known about those, and therefore I cannot help you.
Good luck. :)
Yes, I will ask you to post log files.
You tell us that the client side error message is the same as in the wiki. Fine.
...but what...
My problem, including error log items message matches this article...
Thanks for the update :)
Yes, anandtech's review mentions this:
http://www.anandtech.com/show/9167/intel-compute-stick-review/3
If you compare a laptop with the same NIC (chip), my guess is that the most important differences would be power/heat and aerial (TX/RX) limitations due to the compute stick's small physical size. Don't...
Thanks for the update :)
Yes, anandtech's review mentions this:
http://www.anandtech.com/show/9167/intel-compute-stick-review/3...
I have an Intel Compute Stick running Windows 10 set up as a second MP1 client (the first one is on the same machine as the TV...
Thank you for your response, I think I just solved the recording problem by following these instructions that I found on the wiki support pages...
Repairing database (MySQL)
If you suddenly have a problem with entering the TVGuide screen or even watching LiveTV is not possible ("Unknown Error") it could be that your TV database got...
Thank you for your response, I think I just solved the recording problem by following these instructions that I found on the wiki...
I’ve been using MP1.4.0 on my XP(sp3) computer for the last couple of years, it has been working well. However, last Thurs. all my...
Hello again Ken
This tells me nothing about what you're trying to do.
Are you having "no luck" scanning for channels?
...or is it "no luck" trying to get EPG data?
...or...???
Have you configured the HDHomeRun Setup -> application tab -> "main application" setting as "MediaPortal"? This is very important.
(Note: I have a slightly...
Hello again Ken
This tells me nothing about what you're trying to do.
Are you having "no luck" scanning for channels?
...or is it...
I am running an HTPC with Windows 7, an Intel I5 connected by wire to the internet. After reading about MediaPortal was to...
Many thanks, I disabled the popup in infoservice and it seems to work so far :)
Josh
Many thanks, I disabled the popup in infoservice and it seems to work so far :)
Josh
Hi,
I'm a long time media portal user and I still love it.
From time to time, I have a mediaportal news popup opening when I...
Just to add to this = I removed the mySQL 5.7 version like this:
Admin command prompt (
net stop mysql
sc delete mysql
exit
Manually delete
C:\program files\mysql\[server folder]
C:\programdata\mysql\[server folder]
REBOOT < This is VERY important!
Run the deploy tool again
Download only
Grab the components
Run the mySQL...
Just to add to this = I removed the mySQL 5.7 version like this:
Admin command prompt (
net stop mysql
sc delete mysql
exit...
S0 I was having some interesting issues with the install so I thought I'd go for a complete removal and re-install.
I'm having...
To be very clear: the firmware update may help... or it may not. I cannot give you any guarantees about that.
It's actually hard to know.
The screenshot from the Ceton webpage you provided showed that particular channel appeared to be protected with CGMS-A. That's where the relevance of the links I posted comes in. They say things...
To be very clear: the firmware update may help... or it may not. I cannot give you any guarantees about that.
It's actually hard...
Thanks to the help of @mm1352000 I have been enjoying live TV via my CableCARD on MP1 (Ceton InfiTV4 and Verizon FiOS), but some...
Don't use preview for testing unless you understand the codec merit system and have configured the codecs on your system appropriately. Otherwise a black screen is a possible result even when the EasyCap is actually working.
Instead, please use MediaPortal after configuring your TV codec preferences...
Don't use preview for testing unless you understand the codec merit system and have configured the codecs on your system...
Hi. This question is very similar to this thread (https://forum.team-mediaportal.com/threads/usb-tv-tuner-how-to-configure.131687/)...
That was a complete pain! I managed to get 5.7 to install, though I don't know if there will be any problems with a later version than the deploy tool installs.
It took about 4 tries to get the db installed, with deletions and reboots along the way.
Now I've got about 3 days of config to do!
That was a complete pain! I managed to get 5.7 to install, though I don't know if there will be any problems with a later version...
So just for fun I thought I'd completely reinstall MP - this has turned out to be a real ball ache!
Completely removing MP (using...
Yay!! The uninstall (not full product cleanup) and reinstall worked great. The only thing I had to redo was set up the www_imdb_com.xml file again for getting the EPG to populate using the WebEPG plugin. Thanks for your help!
Yay!! The uninstall (not full product cleanup) and reinstall worked great. The only thing I had to redo was set up the...
Hello -
I chose MP as an alternative to WMC because WMC had no EPG for quite a while. I had MP 1.12 working great, getting the...
MP1
MP2
TV Playback/Recordings stops reproducable after 10-70 Seconds (Signal Quality drops to zero)
DE
Hi Again,
i've made another test this evening (find logs attached). This time only one Tuner (which i haven't tested this morning) produced the error once, and managed to run without error afterwards.
History for the logs (see also Screenshot for reference):
Card 7: Tune Pro7 HD, waited for some time, no error
Card 7: Tune Vox HD...
Hi Again,
i've made another test this evening (find logs attached). This time only one Tuner (which i haven't tested this morning)...
Hi There,
first: This is a new attempt to solve the problem which is also described here...
Thanks for the hint. As i can select each single Tune with the manual control section in the server setup i can make sure that every tuner works
Thanks for the hint. As i can select each single Tune with the manual control section in the server setup i can make sure that...
Hi There,
i've three short questions for setting up the Server in terms of Channel Scans and configuration:
1. I'm using a...
I've added a tip box on the Scan DVB-S Wiki page to help other users in my situation :)
I've added a tip box on the Scan DVB-S Wiki page to help other users in my situation :)
I have two cables from the Quad LNB connected to my Quad TBS 6985 DVS-S2 TV card. There is no DiSEqC involved that I know of.
The...
Hmmm, interesting.
On 32 bit Windows TV Server certainly creates the appropriate registry keys before tuning when both a frequency and channel number are specified in the tuning detail. However when we actually tune, we can only pass in a channel number. We have to rely on a Microsoft component to convert the channel number to a...
Hmmm, interesting.
On 32 bit Windows TV Server certainly creates the appropriate registry keys before tuning when both a frequency...
I'm trying to set up the channels to work with the TV3 blaster. I have a USB-UIRT connected to a set top box that only outputs...
Yeah, I had the same issue with Windows 10 and the ATI HDTV Tuner card. In looking at the driver versions from Windows 7 to Windows 10, some of the generic driver files were updated in Windows 10, which I think is the root cause of the no channels found. I had tried a few other programs in hopes that they could scan with the ATI card...
Yeah, I had the same issue with Windows 10 and the ATI HDTV Tuner card. In looking at the driver versions from Windows 7 to Windows...
So I upgrade to Windows 10 and you know they discontinued Media Center.
I now chose MediaPortal for the first time.
I am unable to...
So none of the buttons on the remote work, right? It's not just a case of some buttons working and some not (?).
As far as I'm aware you're the first person to attempt to get a Hauppauge DCR tuner's IR receiver to work with MediaPortal. Therefore getting it to work may take a bit of experimentation. I'm assuming the receiver should...
So none of the buttons on the remote work, right? It's not just a case of some buttons working and some not (?).
As far as I'm...
I'm trying to setup a Windows Media Center (MCE) remote using my Hauppage DCR-2650 tv tuner with integrated IR receiver using...
Lot's of clicking later.
Not very controlled, but seems that part of the issue was caused by wrong audio render.
Switched to os default and seems to work now.
Just need to retest audio sync issue on recordings.
Lot's of clicking later.
Not very controlled, but seems that part of the issue was caused by wrong audio render.
Switched to os...
I just upgraded to windows 10 and i'm facing a couple of problems.
After standby mepo does not restart.
Looks more as if it does a...
Hello once again,
I am happily able to just check in and not ask for any assistance :) After the assistance about the file edits and some knowledge about the inner working of MP I'm happy to say everything is working fine! Currently I am updating the guide manually but that's just a little renaming error with the xmltv file I haven't...
Hello once again,
I am happily able to just check in and not ask for any assistance :) After the assistance about the file edits...
Hello once again :)
Hopefully I can leave everyone alone after this and not have to bother for answers or solutions.
The anomaly I...
Hi,
I have recently get an issue when install MP 1.13 Full installer on fresh Win10.
That need debugging to solve it but in between, i have start installer and select download only and then i have download all needed (some need to be downloaded from MS website) and after that i have installed all downloaded item, some were not needed...
Hi,
I have recently get an issue when install MP 1.13 Full installer on fresh Win10.
That need debugging to solve it but in...
Crashes at start on MP 1.13 and MP2 cannot finish last step (when tries to start MP service).
Seems like an .NET Framework...
Hi.
The last Alpha Release of MP2 was in 2014...
Hi.
The last Alpha Release of MP2 was in 2014...
How to use MediaPortal to watch content from my pc to my LG smart tv set?
I installed MediaPortal 1.
I have Windows 7 and no tv...
Glad to hear that this thread helped you to solve this issue. All thanks to mm with his help this could be resolved. I have build a patch for tvlibrary (1.13.0) to fix this.
Glad to hear that this thread helped you to solve this issue. All thanks to mm with his help this could be resolved. I have build a...
Hi,
pctv 292e tuner is working fine with mp when using terrestial side of this triple tuner (DVB-T/T2/C). Now I try to get cable...
Blind scan?
TV Server doesn't support blind scanning, so are you using another program in parallel?
Yes.
Blind scan?
TV Server doesn't support blind scanning, so are you using another program in parallel?
Yes.
I have a situation where I need to use a "Universal " LNB that has a LO of 10.600 and a 22K tone that has to be enabled in order to...
No.
Sticks, HDDs and Samsung Galaxy 4 were detected properly.
Very strange.
No.
Sticks, HDDs and Samsung Galaxy 4 were detected properly.
Very strange.
Hello MPlers,
maybe someone can help me.
I have problems with my two new DVBSky T330 USB DVB-C Tuners. My other internal Digital...
Sorry to not have reported my success/failures :) It has been a messy week indeed!
Anyway I did manage to scan in MeTv and Heroes on C Band but I had to do it by specific transponder.
Blind scan wouldn't do it. Also I couldn't get Decades and Movies to scan in in any fashion.
Will get back to that when the snow melts :) But I'm...
Sorry to not have reported my success/failures :) It has been a messy week indeed!
Anyway I did manage to scan in MeTv and Heroes...
Hello ! I am a new user of MediaPortal and already a lover of it's features and performance!
I am changing my switching...
Thanks for the reply but ever since I posted this the TVService seems to be behaving itself.
But if it does start playing up again I know what to do.
Thanks
Thanks for the reply but ever since I posted this the TVService seems to be behaving itself.
But if it does start playing up again...
MediaPortal 1.13.0
Windows 7 Pro 64bit
TVService is not starting when Windows loads - I've tried both Automatic and Automatic...
MM sorry for the delay, instructions very clear for me and thanks, was able to test your patch and is working good, 9 days EPG in most channels. Channels with no info I think is because there is something wrong with the TID, but I am no sure where to find the correct ones to test, I already change the NID in the database...
MM sorry for the delay, instructions very clear for me and thanks, was able to test your patch and is working good, 9 days EPG in...
I've been around this a few days, tring to populate more than current and next program. 110/119 I've tried setting epg grabber on...
Gerally complete centralization of all databases really could work very well, but there are two things:
1.) You need very good knowledge about proffessional using MySQL regarding distributed transactions, synchronizing etc. Beside that you als need to be an experienced coder also, to be able to identify what special actions are...
Gerally complete centralization of all databases really could work very well, but there are two things:
1.) You need very good...
Hi, I want to configure a setup but seems like it is quite tough to archive,
I have 2 htpc and a synology nas install with sql...
Which version of MediaPortal 1 are you using - MP 1.13, 1.12...?
Normally the TV subtitle settings are found under TV/radio section -> TV sub-section -> subtitle settings tab:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/MediaPortal_Configuration/22_TV/1_TV_Client#Subtitle_Settings
Which version of MediaPortal 1 are you using - MP 1.13, 1.12...?
Normally the TV subtitle settings are found under TV/radio...
I'm using MediaPortal 1, but can't find the setting anywhere. I'm looking at this...