MPWebServices (2 Viewers)

  • Locked
  • Sticky
Re: [New Plugin] WebServices + Transcoded streaming + Web Interface for TvServer and Thread moved to new section and closed. For bugreports or feature suggestions please refer to the designated thread. :thx:
Re: [New Plugin] WebServices + Transcoded streaming + Web Interface for TvServer and Thread moved to new section and closed. For...
Hi, i just finished work on my "secret project". What this packet includes: * WebServices which expose TvServer functions and...
Replies
402
Views
156K
  • Sticky
MP1 MP2 Bugreports DE
You can also try my updated version, which has all these patches and should work out-of-box. :)
You can also try my updated version, which has all these patches and should work out-of-box. :)
Please list all bugreports here and always give your MPWebServices and MP version :thx: Version RC3 - Stop Timeshift Button in...
Replies
44
Views
17K
  • Sticky
MP1 MP2 Feature suggestions DE
Would it be possible to have different ip addresses for home network and the Internet? My problem is that I need to be able to stream to LAN without encoding and to the Internet with encoding. However if I set the ip address to my dynamic dns ip, all the traffic goes over the Internet and i run out of bandwidth. Also the channel logos...
Would it be possible to have different ip addresses for home network and the Internet? My problem is that I need to be able to...
Security/Authentification for service clients Ability to retrieve images (TV logos/banners/Fanart) with webservice For tv-series...
Replies
15
Views
17K
  • Sticky
MP1 MP2 FAQ DE
Here's one for the OP: VLC is unable to open the MRL There are many causes of this. What follows is the initial list of solutions: 1) Verify that your Streaming URL as found on the WebServer tab of the MediaPortalWebServices configuration page matches the address of your TV Server OR, if you are using your WAN IP, make sure wrote it...
Here's one for the OP: VLC is unable to open the MRL There are many causes of this. What follows is the initial list of solutions...
Please post some FAQ's here that help other users. I will keep this first post updated with your posts How to get the status of...
Replies
6
Views
6K
AW: Updated version for MediaPortal 1.1.1 hi oxan i have some changes for you change get data from tvbusinesslayer instead of sql ##########WebRecording############# [WebMethod] public List<WebRecording> GetAllRecordings() { List<WebRecording> recInfos = new List<WebRecording>()...
AW: Updated version for MediaPortal 1.1.1 hi oxan i have some changes for you change get data from tvbusinesslayer instead of...
Hello everybody, I created a slightly patched version based on SVN r3595 (of the mp-plugins repository). What's new: Uses the...
Replies
43
Views
16K
Got it to Work WebServices RC3 and MP RC2 with Win 7 64bit (with some issues) Hello, after some digging and trying I got it to work, here is how - maybe it helps: My System: - Windows 7 64bit - Mediaportal 1.1.0.0RC2 - MPWebServices RC3 - SQLExpress 2008 1. Had to install Mediaportal RC2 Server _AND_ Client - installing...
Got it to Work WebServices RC3 and MP RC2 with Win 7 64bit (with some issues) Hello, after some digging and trying I got it to...
hi, i just upgraded to mp 1.1 rc2, now i can´t use webservices anymore. i´m getting errormsgs like this all the time: help? :(
Replies
37
Views
13K
Harley, you have a big saying in the mp team. Couldnt you confince the team to officially develop an ipad and android app? Now there are so many different android and ipad projects. But imho no real professional ones. I believe offering mp users a great app to control mp should be a part of the total mp package. Especially in this...
Harley, you have a big saying in the mp team. Couldnt you confince the team to officially develop an ipad and android app? Now...
Hey all, 2010-02-04 First PREVIEW, just put all the files in one dir, and open up the html file to have a look, and provide some...
Replies
34
Views
12K
joostzilla
J
I got the following error. I don't know why. I fixed it (perhaps temporarily). I cheated by backing up MPWebServices.DLL and deleting it from C:\Program Files (x86)\Team MediaPortal\MediaPortal TV Server\Plugins\MPWebServices\htdocs\bin\ EDIT: I just realised this DLL lives here C:\Program Files (x86)\Team MediaPortal\MediaPortal TV...
I got the following error. I don't know why. I fixed it (perhaps temporarily). I cheated by backing up MPWebServices.DLL and...
Hi, i just finished integrating a new asp.net webserver component. For all those who have issues with the current webserver...
Replies
29
Views
14K
Alright, looks like I fixed it by downloading the latest mencoder (MPlayer-p4-svn-31170-mt). I played some transcoded video well over 5 minutes trouble free :)
Alright, looks like I fixed it by downloading the latest mencoder (MPlayer-p4-svn-31170-mt). I played some transcoded video well...
Hello, as I mentioned in the monster-thread before, I can't stream movies/tv with other profiles than the "direct"-one. The...
Replies
23
Views
7K
AW: Webserver failed to start - Miniwebserver this folder already exists.
AW: Webserver failed to start - Miniwebserver this folder already exists.
MediaPortal Version: 1.1.0.0 (SVN 24669) MediaPortal Skin: Blue3 Windows Version: Windows 7 x64 (fully patched) CPU Type: AMD...
Replies
22
Views
9K
There's a load of cool new components coming out of the Asp.Net team just now. Introducing IIS Express - ScottGu's Blog New Embedded Database Support with ASP.NET - ScottGu's Blog Introducing Razor a new view engine for ASP.NET - ScottGu's Blog Introducing WebMatrix - ScottGu's Blog IIS Express looks to be a good option for a...
There's a load of cool new components coming out of the Asp.Net team just now. Introducing IIS Express - ScottGu's Blog New...
Hi, i plan to release one final version of the MPWebServices with some fixes and some enhancements to the webservice. but...
Replies
16
Views
7K
Re: WORKING: MediaPortal 1.1.0, MPWebServices RC3, Windows 7 Well I hope you do more relaxing than coding. Looking forward to your next release, and yes, by all means, use which ever words you need to for your documentation. :)
Re: WORKING: MediaPortal 1.1.0, MPWebServices RC3, Windows 7 Well I hope you do more relaxing than coding. Looking forward to...
Hi all. First post. Just wanted to drop in, give some thanks and perhaps some tips that I managed to get from reading these forums...
Replies
10
Views
9K
other videos are working with coreplayer.
other videos are working with coreplayer.
Hi there, Putting the stability issues to one side..... Has anyone had any joy in getting this to stream to a Nokia phone...
Replies
9
Views
4K
nope. I'm working now with MySql and mp1.1rc
nope. I'm working now with MySql and mp1.1rc
Hi I've tried many times, but I'm about to give up... I cannot get this to work. The plugin is installed on th main computer...
Replies
7
Views
4K
MP1 MP2 dvb-s radio DE
m3u is not the problem, but mediaplayer keeps loading. after a minute or so I get the message that the stream cannot be played.
m3u is not the problem, but mediaplayer keeps loading. after a minute or so I get the message that the stream cannot be played.
Hi all, I am trying to make a dvb-s radio stream available that can be handled by any media player - ultimately it should be...
Replies
6
Views
1K
Just installed the latest version. However, the inactive channels still show. The SQL should have a line along the lines of "AND channel.visibleinguide = 1" to filter out those channels that aren't wanted.
Just installed the latest version. However, the inactive channels still show. The SQL should have a line along the lines of "AND...
Hi, I've done some minor fixes, added a new SOAP method (AddScheduleAdvanced) and updated to libraries to the ones from...
Replies
6
Views
4K
thanks from what I understand, I just need to copy those files to plugin's directory. i did that and tv server status is now working! BUT when I click TV or Radio I get Server Error in '/' Application. The column notify in table Program does not exist. Description: An unhandled exception occurred during the execution of the...
thanks from what I understand, I just need to copy those files to plugin's directory. i did that and tv server status is now...
Replies
6
Views
2K
mp3lll go to the iPiMP threads and report issue there. For me iPiMP works fine (there are some slight issues with stream not ending properly, but well). So iPiMP works on the iPad, even if currently the GUI is targeted at phones (sizing issue).
mp3lll go to the iPiMP threads and report issue there. For me iPiMP works fine (there are some slight issues with stream not ending...
Hi ALL.. I've searched a way to get it work on my Ipad. any one know how can i do it? Mp.
Replies
6
Views
5K
Actually I got it to load now, and yes I do it with the IP address. The only thing is that it wont play anything I click on in any format. I have installed mencoder and pointed the file location in the right place, and I have put the vlc plugin on the computer to try and play the video or music and I get nothing. it just goes to...
Actually I got it to load now, and yes I do it with the IP address. The only thing is that it wont play anything I click on in any...
Hey guys I am trying out this service because it seems really cool. I can not get anything to load up in my web browser though...
Replies
5
Views
2K
Sorry for the late answer. I've only rewritten the GUI from MPWebServices. I have no skills in programming C# so I couldn't implement your feature. Maybe you have to ask gemx to implement that...
Sorry for the late answer. I've only rewritten the GUI from MPWebServices. I have no skills in programming C# so I couldn't...
Hey Guys, today I've worked on a new User Interface for MediaPortal WebServices. It's nothing special, but I think it's a nice...
Replies
4
Views
6K
I is possible, but only with javascript. I well release an updated version tomorrow with a button to enable deinterlacing.
I is possible, but only with javascript. I well release an updated version tomorrow with a button to enable deinterlacing.
I've searched everywhere and didn't find it... thanks
Replies
4
Views
15K
Yes it did thank you, I'll try it out soon but that sets my expectations on current functionality. Hopefully development is making good progress.
Yes it did thank you, I'll try it out soon but that sets my expectations on current functionality. Hopefully development is...
I'm a long-time mythtv user and was looking at other pvr software. One reason why I was looking is because I wanted to be able to...
Replies
3
Views
2K
I prefer Yadif (2x)-Deinterlacer. Comparing to linear it looks much better at my Computer.
I prefer Yadif (2x)-Deinterlacer. Comparing to linear it looks much better at my Computer.
Hi, I'm using Mediaportal 1.1 with Webservices RC3. It's working nice at all, especially the SOAP function is cool. However, I've...
Replies
3
Views
2K
jblomb Thank you very much! It's working again in MP 1.2 Beta SVN. :thx:
jblomb Thank you very much! It's working again in MP 1.2 Beta SVN. :thx:
Hi Dunno if anyone is still interested, but I made a build för 1.2.0 beta since I am using it in my project. It's based on...
Replies
3
Views
3K
try this .. https://forum.team-mediaportal.com/mpwebservices-463/working-mediaportal-1-1-0-mpwebservices-rc3-windows-7-a-85633/
try this .. https://forum.team-mediaportal.com/mpwebservices-463/working-mediaportal-1-1-0-mpwebservices-rc3-windows-7-a-85633/
Hi there, I installed MPWebServices_RC3 today on my MP 1.1.0.0 system but it won't work. All I get is the following...
Replies
2
Views
4K
Well I hope someone would be kind enough and try and make a version that works with the new tv-db fields since they gonna be perm sooner or later when beta hits, and this plugin is pretty awsome.
Well I hope someone would be kind enough and try and make a version that works with the new tv-db fields since they gonna be perm...
Anyone know how to make it work in latest 1.2.0 svn? Im getting these errors when im trying to access the webpage, Row 46...
Replies
2
Views
2K
Hi there, Log files are where? I dont have that folder? :( J.
Hi there, Log files are where? I dont have that folder? :( J.
Hi there, I've installed MPWebServices yesterday along with the newest SVN-Version from MediaPortal. I've activated and configured...
Replies
2
Views
2K
I don't think there is a method for this because the webservice only gives you the link to the rtsp stream, after that it has nothing more to do with the playback. You could use the "Streamer.aspx" page which stops timeshifting once the stream is ended (playback stopped). edit: too slow ;)
I don't think there is a method for this because the webservice only gives you the link to the rtsp stream, after that it has...
I'm trying to integrate this plugin in my own website via PHP and the SOAP commands I can succesfully execute the commands, and...
Replies
2
Views
1K
...made a new thread instead
...made a new thread instead
I see that Oxan was handling new releases for a while but no longer wants to. If no one else has picked this up yet, im keen to...
Replies
2
Views
2K
I see, fixed version will be released tomorrow.
I see, fixed version will be released tomorrow.
My server setup uses freesat, so I have several hundred channels. In the MP Server, I've unticked all of the repeated...
Replies
2
Views
2K
Well, currently it uses its own gentle.config which you have to edit in order for it to connect with the database. It should be possible to read the mediaportal one, I'll see what I can do for you.
Well, currently it uses its own gentle.config which you have to edit in order for it to connect with the database. It should be...
hi Team I will be heppy to any help. if i will go on explorer to http://MYIp:888 i use user and Password all ok. now if i will...
Replies
2
Views
2K
Understand all that just wanted to check I was not going to re-invent the wheel. It is not so much the SOAP side of things it was more a whole PHP application to enable recordings from over t'interweb. If I ever get chance I will try and knock something up just did not want to re-invent the wheel.
Understand all that just wanted to check I was not going to re-invent the wheel. It is not so much the SOAP side of things it was...
Currently I have a PHP script on my NAS box to wake my HTPC from sleep and the self-contained web-server setup which works ok but...
Replies
2
Views
2K
I have the exact same question. Can I use this without TV Server part of MP installed. I am not interested in Live TV at the moment and don't have any TV Card (I have one in a drawer but not interested putting it into my HTPC).
I have the exact same question. Can I use this without TV Server part of MP installed. I am not interested in Live TV at the moment...
Hi, i'm looking for a MP streaming solution like you created. but only for my movies/images/audio files i dont use any tv...
Replies
1
Views
2K
Thanks for the detailed instructions. I finally got mine working on Windows 7 with MediaPortal 1.1.0 release :)
Thanks for the detailed instructions. I finally got mine working on Windows 7 with MediaPortal 1.1.0 release :)
I know a number of people were having problems with getting MPWebServices to work under Windows Server 2008 R2. Specifically...
Replies
1
Views
4K
Top Bottom