Thanks for your reply.
I already tested my suggested card and have to say that it does not fit.
Now I use a HD4670, which is the shortest I know. This cards fits with ca. 3-5cm space left to the optical drive ( LG Electronics GGC-H20L).
Hope it helps others too.
Have i nice evening
Sinus2K
Thanks for your reply.
I already tested my suggested card and have to say that it does not fit.
Now I use a HD4670, which is...
Hi together,
i am looking for a graphics card which fits in the Silverstone LC16M case. The problem is that there is only 18-19...
Hi everyone,
this might seem a little strange but:
I have an HD3200 onboard chip, which decodes everything I throw at it...I don't have 1080i sources so no problem there BUT I have the feeling the MP menus in general are a bit stuttery. I had a look at Windows Media Center recently which has very smooth menu transitions - I...
Hi everyone,
this might seem a little strange but:
I have an HD3200 onboard chip, which decodes everything I throw at it...I...
Hi everyone,
this might seem a little strange but:
I have an HD3200 onboard chip, which decodes everything I throw at it...I...
as far as i know ati does not do l5.1, max official dxva standards (l4.1). nvidia does not have this limitation.
as far as i know ati does not do l5.1, max official dxva standards (l4.1). nvidia does not have this limitation.
But I cant get any releasenotes "page can not be found"
Vistadriver is here
- Poll
nice app, great!
used the original hdmion app with a shortcut button on my remote. Will try this app and see how it works.
This app does not have the desired effect on my system. Hoped that the app (with the setting 'turn monitor on every second') could poll my TV when I turn it back on. Still have to use the original hdmion app...
nice app, great!
used the original hdmion app with a shortcut button on my remote. Will try this app and see how it works.
This...
How many of you are suffering from blank screen if the HTPC was on before the TV. I was having the same problem, when my PC auto...
I'm interested in playing the latest games on my HTPC with decent framerates, but am somewhat limited with card length on the NSK2480. I would really like to grab a GTX260 (55nm) but I'm pretty sure the 10.5" card length is too deep for the case. I have no intention of cutting the case at all so I need to find something else that fits...
I'm interested in playing the latest games on my HTPC with decent framerates, but am somewhat limited with card length on the...
I'm interested in playing the latest games on my HTPC with decent framerates, but am somewhat limited with card length on the...
I'm using the 186 drivers without problems. It finally allows me to use 50Hz with my TV!
I'm using the 186 drivers without problems. It finally allows me to use 50Hz with my TV!
hey guys,
Just made the switch from ati to an nvidia 8400 GS which plays 24p perfectly. However I have found that VC1 content...
Well, deinterlacing options makes no impact on 720/1080p.... since there is no need to deinterlace. (p = progressive = noninterlaced)
Good reading:
http://en.wikipedia.org/wiki/Progressive_video
What is deinterlacing? The best method to deinterlace movies
Well, deinterlacing options makes no impact on 720/1080p.... since there is no need to deinterlace. (p = progressive =...
Can anyone tell me which settings MP uses for picture quality.
I have a ATI radeon 3650
I use the most recent ATI CCC
For...
Yeah, I'm always keeping a couple of images ready, learned it from (bad) experience... Using Acronis TrueImage.
But images will not help me with new MB and CPU - I need to re-install OS and that's why I kept away from it as long as possible. And then on top of OS comes everything else - utilities, codecs, drivers, etc. Until app. 2...
Yeah, I'm always keeping a couple of images ready, learned it from (bad) experience... Using Acronis TrueImage.
But images will...
Hi,
Yes, yet another question about new card... Sorry about that! :(
My current card (9200) is not DX9 compatible so I need...
I have only HD3450. In this thread about the 8.12 release hoborg suggests sticking with the earlier CCC. What does anyone think about utility vs. risk of an upgrade to 9.6 for HD3xxx users?
I have only HD3450. In this thread about the 8.12 release hoborg suggests sticking with the earlier CCC. What does anyone think...
some fixes, click here for Vista drivers
hey guys,
I've been using the onboard gpu on my 780g board for about 6 months and have never been able to watch a blu ray at 24p without losing sync constantly with the sound. I have tried powerdvd's 7/8/9 and tmt3 and both have the same problem. After a bit of consideration I figured my best bet was to invest in a new gpu so I...
hey guys,
I've been using the onboard gpu on my 780g board for about 6 months and have never been able to watch a blu ray at 24p...
hey guys,
I've been using the onboard gpu on my 780g board for about 6 months and have never been able to watch a blu ray at 24p...
@Paranoid: thanks i ll do that
re-flex: apparently yeah no sli power but still sli boost
@Paranoid: thanks i ll do that
re-flex: apparently yeah no sli power but still sli boost
hi,
i own:
Gigabyte GA-E7AUM-DS2H
Intel Core 2 Duo E8500
Antec NSK2480 (380W)
Scythe Ninja Mini without the fan.
Now...
Hi All,
Owlsroost - huge thanks, mate - that seems to have fixed it:thx::D
There was only a 0000 folder and a vidoe folder, but changing it as per the instructions and your first file worked great. Interface is now showing as DVI and I have more screen resolutions available.
Cheers
...Steve
Hi All,
Owlsroost - huge thanks, mate - that seems to have fixed it:thx::D
There was only a 0000 folder and a vidoe folder...
Hi all,
I think I may have an interesting problem:-)
I have MP1.0.2 in my HTPC that has been working quite happily through my...
No need to buy new gfx card to replace the HD3200. Just increase the HT frequency in the bios. The HT frequency is the highway between the HD3200 and the RAM. Since you have AM2+ CPU the HT=1000Mhz. (If you have Phenom CPU it's 1800Mhz ie faster, that is why hd3200+phenom cpu does better deinterlacing). That's why 780G...
No need to buy new gfx card to replace the HD3200. Just increase the HT frequency in the bios. The HT frequency is the highway...
Hi there,
I have an Athlon x2 5600+ CPU, and Antec Fusion case NSK2400 380W and am interested in considering upgrading to a...
i havent even tried MP on this machine, i was playing around with MPC-HC and couldnt get it to work
i havent even tried MP on this machine, i was playing around with MPC-HC and couldnt get it to work
has anyone had any experience with this card, i cant seem to get DXVA working, and when it does work it stutters like mad, CoreAVC...
Well it depends if you need gaming power too. I don't as mine is dedicated htpc and i just upgraded from GeForce 7300 -> 8400GS(G98 newer gpu) and i'm impressed for only 40€ card. All hd material i have tried runs 50 frames/sec. And i have choises for codecs Coreavc with cuda is ok. Cyberlink 9 is marvelleous with dxva. Only thing to...
Well it depends if you need gaming power too. I don't as mine is dedicated htpc and i just upgraded from GeForce 7300 -> 8400GS(G98...
I have a very powerful computer and only thing it doesn't have but it needs, is an up-to-date graphic card, since the one it has is...
dxva working with xp sp3 for h264 in pdvd8 and mpc-hc.
havn't tested for mpeg2
h264 hdtv + pdvd8 + 9.4 seemed to have occasional glitch where video would be green and freeze with live tv,
therefore i went back to 8.12 to use for h264 hdtv.
dxva working with xp sp3 for h264 in pdvd8 and mpc-hc.
havn't tested for mpeg2
h264 hdtv + pdvd8 + 9.4 seemed to have occasional...
Here is the
Link!
Best regards
Helios
yeah i have gigabyte 780G mobo with integrated HD3200 (512mb shared memory) and AMD X2 4200+ CPU / 2GB DDR2 800 RAM using XP SP3 and MP 1.0 Final. 1080i is ok fairly good, but a little shakey. I think the HD3200 is pretty much maxed out when doing 1080i. I run the HD3200 overclocked to 600 (Factory clock is 500). I'm not sure if i...
yeah i have gigabyte 780G mobo with integrated HD3200 (512mb shared memory) and AMD X2 4200+ CPU / 2GB DDR2 800 RAM using XP SP3...
I am looking into building a Blu-Ray capable HTPC to replace my Atom based movie box. I was wondering if there were any mATX...
Yes, AFAIK - see ATI Radeon HD 4600 & 4800 series support 7.1 channel HDMI audio! - AVS Forum
Note that any DVI-HDMI adaptor must be the ATi version - generic ones won't enable the HDMI audio (you just get the video).
Tony
Yes, AFAIK - see ATI Radeon HD 4600 & 4800 series support 7.1 channel HDMI audio! - AVS Forum
Note that any DVI-HDMI adaptor...
Can anyone confirm if it's all cards in the ATI 4xxx range that will output 7.1 LPCM via HDMI (either via direct onboard HDMI or...
Hi,
does anyone ever saw a nvidia 9300GS/GE card buyable?
Im interested in that cards because they bring nvidia VP3 and should be able to be cooled passively.
( And they might be cheap, too )
Or does anyone tested one of those card once? Did not find a good test yet.
Could try a 9400GT but this only supports VP2.
Hi,
does anyone ever saw a nvidia 9300GS/GE card buyable?
Im interested in that cards because they bring nvidia VP3 and...
Hi,
does anyone ever saw a nvidia 9300GS/GE card buyable?
Im interested in that cards because they bring nvidia VP3 and...
No, this is why it is weird, I am using HDMI.
No, this is why it is weird, I am using HDMI.
Hello Community!
Please take a look here!
Best regards
Helios
Hi mate
Im currently running a 780g with a 4450e (2.3GHz) CPU and its great - its quiet and low power (although many people have complained about lack on interlacing options using X2 cpus - i do not use 1080i content so its not a problem for me).
If i was building a system now I would go for the Nvidia 9400 (ive also read the...
Hi mate
Im currently running a 780g with a 4450e (2.3GHz) CPU and its great - its quiet and low power (although many people have...
Crap. i was all set to go with the Nvidia MB solution, but then learned more about the AMD 790GX solution and it made me think...
I have a Athlon 2400BE and DXVA is working fine under vista.
I have a Athlon 2400BE and DXVA is working fine under vista.
Hi!
At the moment i've the GA-MA78GM-DS2H - but i cannot use Vector Adaptive Deinterlacing with my Athlon X2 4200ee and i don't...
Oh, yes, you're right. I'm using the HDMI-1 on the TV, HDMI-2 is being used for the PS3 because for some reason the PS3 only works properly on port 2, on port 1 I get occasional flicker so I hope that's not the problem. There's also a third HDMI port that I can use. Thanks for the tips :) .
Oh, yes, you're right. I'm using the HDMI-1 on the TV, HDMI-2 is being used for the PS3 because for some reason the PS3 only works...
I have been testing out media portal and getting as much knowledge as I can to set it up how I would like it before I go purchase...
I had the same Problem, and a simple Trick worked for me.
Just create a new Profile in your CCC and edit it manually ( it is an *.xml file with the name of the Profile)
Search for
<Feature name="Deinterlacing">
and set the value to 5 or 6 ( can`t remember, i`m not at home right now)
also make sure that deinterlacing is set to...
I had the same Problem, and a simple Trick worked for me.
Just create a new Profile in your CCC and edit it manually ( it is an...
hi!
i tried enable vector adaptive deinterlacing by setting vforcedeint to 6 in dxva checker. but i didn't change anything in...
I run nVidia driver version 181.22 (on Vista32).
Tony
I run nVidia driver version 181.22 (on Vista32).
Tony
Been asked alot I know, sorry. I currently have an ATI 3450 and want to know if I would gain anything by going with a 4850 with...
Ahh, sounds very interesting - so at least this proves it should be possible to use this on a programmable remote as posted earlier here. As far as I understand, there is so far no possibilit for any "autoswitch" function (as in early days with scart switching line!?
Ahh, sounds very interesting - so at least this proves it should be possible to use this on a programmable remote as posted earlier...
I have searched but didn't find help for this topic:
In the past, it was possible to autoswitch to the corresponding inputchannel...
@ Sprangleknas Too late :) I just did that already . ghehehe.
@ Sprangleknas Too late :) I just did that already . ghehehe.
Catalyst 9.2 has just been released:
ATI Radeon™ Drivers and Support
The list of bugfixes is long but for me there are no...
hmm.. 2 people with no problems. OK Im going to give it another try and report back if the hd reg tweaks have workd or not :)
[edit]
Still no succes. I have 2 options available for dxva. see picture.
I also added the 8.12 picture of the DXVA check.
Im going back again to 8.12.
Other people have troubles with this as...
hmm.. 2 people with no problems. OK Im going to give it another try and report back if the hd reg tweaks have workd or not :)...
Hi Community!
ATI Catalyst™ 9.1 Display Driver are out now!
Best regards
Helios
Yep - as I've since found out through closer inspection of it. Interestingly though, PDVD8 was playing it as DXVA (VMR9 input pin was definitely DXVA), but with massive artifacting. MPC-HC refuses to play it as DXVA.
I'm guessing the artifacting occurred because of too many reference frames - periodically the artifacts would...
Yep - as I've since found out through closer inspection of it. Interestingly though, PDVD8 was playing it as DXVA (VMR9 input pin...
I need a low profile video card that isn't top of the line, but can get the job done. It needs to be able to playback 1080p...
Well I have been using the 780G since it was available here in Norway and I haven't had any problems what so ever with image quality, I have had other problems but none of them have been GPU-related. That is I have had one minor problem, and that was that audio dropped out when changing input on the TV, but that has been fixed.
I...
Well I have been using the 780G since it was available here in Norway and I haven't had any problems what so ever with image...
I am in the design phase of my HTPC project and would like suggestions on video cards. I want to have HD output (to projector or...