How do you get Subtitles if you do that? I heard without Haali you can't get subtitles from an MKV file with MP? I am trying to play my rip of Avatar with DTS-MA audio and N'avi subtitles - in MP the video is almost unwatchable (haali splitter) but in MPC-HC the video is perfect but subtitles don't show up. Is it possible to get...
How do you get Subtitles if you do that? I heard without Haali you can't get subtitles from an MKV file with MP? I am trying to...
Hi,
I want to start this thread, because I cant get HD bitstreaming with MP. I use the realtek 2.42 driver, SAF 5.0beta and hd...
Nevermind, fixed the problem... I guess DivX h.264 decoder doesn't play nice (the version I have anyway) with HD audio in files...MPCVideoDec.ax is much better now with this updated version so i'm just using that.
Nevermind, fixed the problem... I guess DivX h.264 decoder doesn't play nice (the version I have anyway) with HD audio in...
Nevermind, fixed the problem... I guess DivX h.264 decoder doesn't play nice (the version I have anyway) with HD audio in...
AW: MP crahs on playing WMA-DRM via WinAmp
Now there is another problem in version 1.1.0 RC2: on selecting a wma-drm-file in MP, winamp starts and try to playback the file << C:\Programme\Team MediaPortal\MediaPortal\D >>.
The Winamp-Playlist contains only one file: "D".
Thanks
AW: MP crahs on playing WMA-DRM via WinAmp
Now there is another problem in version 1.1.0 RC2: on selecting a wma-drm-file in MP...
Hello,
MP crashs on trying to play a WMA-DRM-file with a wrong licence. WinAmp opens a popUp "No licence..." - MP still work...
Thanks for the replies!
It does seem to be a codec (or player) problem after all... :(
If I play the videos (.mkv) in Windows Media Player, there's no stuttering, only in MediaPortal and GraphStudio.
Any suggestions?
Thanks for the replies!
It does seem to be a codec (or player) problem after all... :(
If I play the videos (.mkv) in Windows Media...
Hi,
Is it possible to increase the video buffer size?
My video playback sometimes pauses for a few seconds (with the audio still...
I have tried SAF 4 stable and if I drag and drop the file into Graphstudio it loads a different graph, but instead of not playing until the third attempt, if just doesn't play at all. It just shows a black screen (I assume the first frame of the film).
Any ideas?
Robbo100
I have tried SAF 4 stable and if I drag and drop the file into Graphstudio it loads a different graph, but instead of not playing...
Hi there, I have posted about this problem before, but it was within the SAF thread and quickly got lost (and I have some more info...
Media Portal will not play ANY files if you have XP , and use the /3GB switch in boot.ini. Found this out last week when I added the /3GB and then couldn't play anything.
Media Portal will not play ANY files if you have XP , and use the /3GB switch in boot.ini. Found this out last week when I added...
I can't seem to get any of my movies to play...
They are all xvid files but when i play them on MP it comes up with an error...
The source filter looks different in the two screenshots. Can you verify which filters are in use by right clicking them in Graphedit and selecting Properties?
The source filter looks different in the two screenshots. Can you verify which filters are in use by right clicking them in...
Based on some research for the Bluray Handler 0.9.1 plugin i know have some codec related questions.
I hope someone can help...
hi hjid,
as Wbunaarf said. It should be enough to activate dxva in MP configuration. The bug i ran into only appears with with powerdvd 9 or higher. (I used version 8 before, so I'm pretty sure)
regards
hi hjid,
as Wbunaarf said. It should be enough to activate dxva in MP configuration. The bug i ran into only appears with with...
Hello,
I have a problem installing the cyberlink codecs on Win7. It doesnt matter which version (tried 9 and 10).
PowerDvd...
great - thanks a lot
great - thanks a lot
Hello
I cannot get correct black levels when using EVR with the internal player. This is with the MPC-HC codecs (SAF) and also...
+1 on everything!
Why is deinterlacing such a mess?!?!??!
In my case all I know is I'm using HW for HD, as my poor CPU couldn't handle SW, but I don't know which method...
What is the effect on the fallback settings?
What is the effect on the codec (I can see Auto/Bob/Weave in PDVD9)?
What is the effect on driver (I can see a bunch...
+1 on everything!
Why is deinterlacing such a mess?!?!??!
In my case all I know is I'm using HW for HD, as my poor CPU couldn't...
How can I see if deinterlacing is used or not and if so, what kind of deinterlacing is being used? :ooops:
Hello
I'm using a dedicated server so no tv-card in the client.
Thanks for your try though.
Hello
I'm using a dedicated server so no tv-card in the client.
Thanks for your try though.
Hello
I'm trying to get the ION chip to do the work when watching SD-TV (mpeg2)
From what i understand i should be able to do...
MediaPortal Version: 1.1.0 RC2
MediaPortal Skin: StreamedMP 1.0.3.1223
Windows Version: Windows 7 x64
CPU Type: Quad 8300
HDD:
Memory: 8gb
Motherboard: Asus P5Q Deluxe
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card:
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2...
MediaPortal Version: 1.1.0 RC2
MediaPortal Skin: StreamedMP 1.0.3.1223
Windows Version: Windows 7 x64
CPU Type: Quad 8300
HDD...
MediaPortal Version: 1.1.0 RC2
MediaPortal Skin: StreamedMP 1.0.3.1223
Windows Version: Windows 7 x64
CPU Type: Quad 8300
HDD...
You it should work (btw LPCM is still digital just raw decoded audio, you need HDMI for LPCM) but you may find that not all files work as you would think. I use TMT to playback bluray discs launch from MP but I use the internal player for everything else (but I have a Xonar HDAV and an amp capable of decoding DTS HD)
You it should work (btw LPCM is still digital just raw decoded audio, you need HDMI for LPCM) but you may find that not all files...
Hello,
With all the influx of mkv movies supporting DTS/DD HD I would like to add the ability to play HD sound tracks on my...
Is the post processing feature available in the beta version of Media Portal 1.1? I can't seem to see it.
Is the post processing feature available in the beta version of Media Portal 1.1? I can't seem to see it.
MediaPortal Version: 1.0.0.0 Final
MediaPortal Skin: Streamed MP
Windows Version: Vista Home Premium x64
CPU Type: Intel C2D...
I did the "upgrade" route on Vista32 Ultimate -> Win7 Ultimate, 2 weeks later now on a clean Win7 64 which I also had setup as part of dualboot, actually found that I had more driver problems with 32, for instance there was a hauppauge update for my tv card which refused to install, went straight in on 64.
Really just found odd...
I did the "upgrade" route on Vista32 Ultimate -> Win7 Ultimate, 2 weeks later now on a clean Win7 64 which I also had setup as part...
As topic says, do you think its a seriously bad idea to upgrade my system from vista 64 to windows 7 64? Will it completely mess...
Rekenaar will on your case: no system specs or details on how you are playing back the media files :P
Seriously, if you expect help, please follow the basics. OK. now, that's out of the way. I will assume you have followed the install requirements ie. if you are using SPDif for AV receiver encoding, you have checked the AC3 & DTS...
Rekenaar will on your case: no system specs or details on how you are playing back the media files :P
Seriously, if you expect...
ive just installed SAF v5.00 experimental (based on FFDShow DXVA decoder) because my video wasnt play, now that works.... but i get...
Certainly:
1) I have always had issues with ffdshow taking complete control of my various systems, over the years. Blacklisting, etc. has not always worked. With the supplied version of MPC-HC, I cannot prevent ffdshow being loaded as either the primary video codec, or it attaching itself as a secondary one. Even if I have removed...
Certainly:
1) I have always had issues with ffdshow taking complete control of my various systems, over the years. Blacklisting...
I have just installed CoreAVC 2.0 to set up my HTPC with minimal codecs as the SAF package did not fulfil my requirements for a...
Ive changed all the decoders to MPC and it works much better now :)
Ive changed all the decoders to MPC and it works much better now :)
I do have a receiver which decodes DTS and AC3 so i installed AC3 filter and set the config to use SPDIF
Getting sounds through...
Hi,
I'm using Mediaportal 1.1 RC1, Windows XP SP3 and SAF unlocked Beta 21.
After a new Installation of Windows and Mediaportal I cannot watch DVDs with forced Flag Subtitles. This means: If there is 1 Subtitle Stream on the DVD, some of the pictures (the Subtitle pictures) are marked as forced, some not. MP have to show the...
Hi,
I'm using Mediaportal 1.1 RC1, Windows XP SP3 and SAF unlocked Beta 21.
After a new Installation of Windows and...
Hi,
I'm using Mediaportal 1.1 RC1, Windows XP SP3 and SAF unlocked Beta 21.
After a new Installation of Windows and...
In Mediaportal, when using the DSHOW internal player, half the MP3's do not work.
Mediaportal reports 'cannot play' and skips the track.
I cannot use BASS player because it gives me distortion on my receiver (when lowering DB also)
The MP3's do work in Windows XP, when opening with any given program.
Differences between the...
In Mediaportal, when using the DSHOW internal player, half the MP3's do not work.
Mediaportal reports 'cannot play' and skips the...
In Mediaportal, when using the DSHOW internal player, half the MP3's do not work.
Mediaportal reports 'cannot play' and skips the...
Also MediaPortal will play the .m2ts files, you just need to add the extension in the MP configuration.
Also MediaPortal will play the .m2ts files, you just need to add the extension in the MP configuration.
I'm setting up a new HP dv6-2140ed laptop. I'd like to use MediaPortal for all my HD (and normal) movie stuff. Now setup was easy...
MediaPortal Version: 1.1 RC2
MediaPortal Skin: XFactor 617
Windows Version: Windows 7 64bit
CPU Type: AMD Athlon II 240e
HDD: WD Caviar Green 750GB
Memory: 2Gb PC5300 DDR2
Motherboard: MSI 785GTM-E45 (785g chipset)
Video Card: Integrated Radeon HD4200
Video Card Driver: Catalyst 10.2
1. TV Card: PEAK Dual Tuner
1. TV Card Type: DVB-T...
MediaPortal Version: 1.1 RC2
MediaPortal Skin: XFactor 617
Windows Version: Windows 7 64bit
CPU Type: AMD Athlon II 240e
HDD: WD...
MediaPortal Version: 1.1 RC2
MediaPortal Skin: XFactor 617
Windows Version: Windows 7 64bit
CPU Type: AMD Athlon II 240e
HDD: WD...
I have been using ffdshow upscaling for over a year, now. I've discovered in recent issues with SAF*.00 that it is also ffdshow version dependent. I f I overwrote the ffdshow.ax version installed by SAF with one I knew upscaled, then my settings would work. Otherwise, the video output would be same as input.
I have the profile set...
I have been using ffdshow upscaling for over a year, now. I've discovered in recent issues with SAF*.00 that it is also ffdshow...
Has anyone already tried powerdvd 10 h.264 codec ? I am now using divx h.264 with hardware acceleration and i am very happy with...
I don't know much about all this stuff, but I have just read that a 32 bit app can only use 32 bit codecs, so MP being a 32 bit app, you need to install MP-HC 32 bit, not 64 bit.
Hope this helps ...
JMarc
I don't know much about all this stuff, but I have just read that a 32 bit app can only use 32 bit codecs, so MP being a 32 bit...
MediaPortal Version: 1.1.0
MediaPortal Skin: Blue3Wide
Windows Version: Windows 7 64-bit
CPU Type: Intel Core 2 Due E8300
HDD...
AW: Re: Stuttering on few files
Thanks this makes sense...
I've tried today PowerDVD 10 and in MP the same problem, but when i play the file directly in PowerDVD 10 the stuttering is gone !?!? Very strange...
The same with PowerDVD 9, but when i use the DXVA Checker and play the file with PowerDVD9 i get stuttering.
The same...
AW: Re: Stuttering on few files
Thanks this makes sense...
I've tried today PowerDVD 10 and in MP the same problem, but when i...
I hava a strange problem.
On some 1080p files i get stuttering the whole film.
On others it works fine..
I've tried the DXVA...
AW: How to get the best image quality in MP ?
You should try the search button. There are a lot of threads about that topic. BUT in the end its all about your equipment.
Some get better results with codec A, others with codec B.
You might have a look at SAF ( codec "pack" created for MP )
AW: How to get the best image quality in MP ?
You should try the search button. There are a lot of threads about that topic. BUT...
Hello guys,
i've been fiddling around for a while now with the differents settings of MP, ffddshow et my graphic card's, and...
I have found that video playback of some videos became corrupted after updating to ATI Cat 10.2. It seems to mostly affect 480p videos but I had a few h264 encodes that had the same issue. The video basically displays blocky artifacting during the duration of the file.
I have tested using the MPC-HC and FFDSHOW decoders with the...
I have found that video playback of some videos became corrupted after updating to ATI Cat 10.2. It seems to mostly affect 480p...
I have found that video playback of some videos became corrupted after updating to ATI Cat 10.2. It seems to mostly affect 480p...
Hello,
Using SAF 4 (MPC-HC) for H264 videos.
If I have an .mkv WITHOUT any subtitle file in a separate file, everything is fine.
If there is any matching subtitle file (.srt in my case), the video plays in wrong Aspect Ratio, like Screen Calibration (pixel aspect ratio) was not used.
It may go unnoticed by most of the people using...
Hello,
Using SAF 4 (MPC-HC) for H264 videos.
If I have an .mkv WITHOUT any subtitle file in a separate file, everything is fine...
Hello,
Using SAF 4 (MPC-HC) for H264 videos.
If I have an .mkv WITHOUT any subtitle file in a separate file, everything is fine...
Fixed on Win7 w/New DaemonTools-Lite version!
The title says it all... The "check for Updates" flag from DaemonTools said there's a new version and now my Davinci Code mount plays fine! Well.... it gets past the hangup I'd pointed out above, anyway.
Fixed on Win7 w/New DaemonTools-Lite version!
The title says it all... The "check for Updates" flag from DaemonTools said there's...
MediaPortal Version: 1.1.0.0
MediaPortal Skin: Streamed MP
Windows Version: Windows 7 64bit
CPU Type: Intel P Dual Core 2.8GHz
HDD...
Ok i found out what is was in the ffdshow audio decoder settings, that was causing the issue when added as a video post processing filter. For me anyway.
If I set the AC3 to pass-through, then some videos I have (generally the ones which have two audio tracks) never load in MP RC1, and SAF 5.00 RC1. For example every mkv by...
Ok i found out what is was in the ffdshow audio decoder settings, that was causing the issue when added as a video post processing...
MediaPortal Version: 1.0.5.25080
MediaPortal Skin: Default
Windows Version: Windows 7 Professional 64-bit
CPU Type: AMD 5050e...