Having trouble installing or configuring MediaPortal?
@mpsam - have done that and it works just as required.
Many thanks to all above who pointed me in the right direction - much appreciated :D
@mpsam - have done that and it works just as required.
Many thanks to all above who pointed me in the right direction - much...
Hi,
I have a couple of questions which I hope someone can help with -
1. I have installed MP TVServer 1.3.0 on an old P4 to do...
you can use "Backup Setting" plugin available in Download sections ...
you can use "Backup Setting" plugin available in Download sections ...
I have an existing HTPC using MP 1.3. It has a number of plugins, including MovingPictures and MP-TVSeries. I am in the process of...
Your welcome and we all hope your upgrade is clean & smooth.
Cheers - JCMP
Your welcome and we all hope your upgrade is clean & smooth.
Cheers - JCMP
I had MP1.2.3 server running, and began updating to 1.3. Then the power failed! It doesn't seem to have damaged V1.2.3 which...
Perfect, thanks for the quick response and the tip on backing up!
Now to find a satellite card :)
Perfect, thanks for the quick response and the tip on backing up!
Now to find a satellite card :)
Hi,
I've been running MP for about 3 years now, until recently I lived in a cable TV area so never needed to use the TV aspect of...
Hi Guys,
Thanks for your help. I did a clean install of 1.3F all seems well with shutting down. Just need to fine tune everything over the next few days.
Hi Guys,
Thanks for your help. I did a clean install of 1.3F all seems well with shutting down. Just need to fine tune everything...
Hi Guys,
Since upgrading to 1.3 Final I have started to have a problem with my lounge client. When I shut MP down by using the...
1) See https://forum.team-mediaportal.com/threads/can-i-do-a-clean-install-with-prior-backup-of-the-important-settings.117449/#post-975862 - absolutely NO reason to loose your libraries (useful stuff to know anyway:-)
2) I had what I suspect is same problem in 1.3 Alpha - due to me NOT stopping the TV service before I did the...
1) See...
After few PC Reboots I was suddenly able to upgrade. Case closed hopefully.:)
-------------
I am trying to upgrade from 1.3.0 RC to...
Hi,
There is no response for this post. So I Closed.
Regards,
K.Guru.
Hi,
There is no response for this post. So I Closed.
Regards,
K.Guru.
Hi,
There is no response for this post. So I Closed.
Regards,
K.Guru.
Yeah, 99% of video playback problems are due to codec packs. Keeping it simple really helps!
Yeah, 99% of video playback problems are due to codec packs. Keeping it simple really helps!
Hi, I have posted re my problem and I don't know if the description is too vague or it's just unusual type of fault. I was...
Hi
In MP 1.2.3 I was grabbing epg data using EPG Grabber and importing TVGuide.xml via XmlTV plugin. When first set up times were incorrect so checke "apply time zone compensation" ("13" Hours - New Zealand).
With MP 1.3.0 my data was now 13 hours out. EPG grabber does have the correct format ie time with "+1300" in the appropriate...
Hi
In MP 1.2.3 I was grabbing epg data using EPG Grabber and importing TVGuide.xml via XmlTV plugin. When first set up times were...
Hi
In MP 1.2.3 I was grabbing epg data using EPG Grabber and importing TVGuide.xml via XmlTV plugin. When first set up times were...
Logs please Towme, need them to see what's happening, although codec issue seems top of lit of options.
Cheers - JCMP
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files?highlight=create+log
Logs please Towme, need them to see what's happening, although codec issue seems top of lit of options.
Cheers - JCMP...
just installed it, added a directory, set audio output, started it, tried to play video files... getting a black screen no...
I did an upgrade of 1.2.3 to 1.3 and have had some small issues with the TV-Server.
1) When i try to restart the TV-Server i'm not allowed to do this.
I guess i have to change "someting" but no clue what and where.
2) I'm running the TV-Server on the same PC taht i'm running the client on.
But when i select preview from the...
I did an upgrade of 1.2.3 to 1.3 and have had some small issues with the TV-Server.
1) When i try to restart the TV-Server i'm not...
I did an upgrade of 1.2.3 to 1.3 and have had some small issues with the TV-Server.
1) When i try to restart the TV-Server i'm not...
The 2250 has known driver issues. You need an older version of the driver. If you search the forum, you should find a few posts on it.
The 2250 has known driver issues. You need an older version of the driver. If you search the forum, you should find a few posts on it.
This is a cross post, as I originally posted in the wrong forum
:oops:
As the title says, I'm having issues with my computer...
Hello Fabrizio,
thanks for your answer.
That's all I needed to know. So I can safely update my TV server and keep the clients running 1.2.3 until I update them.
Thanks again
Hello Fabrizio,
thanks for your answer.
That's all I needed to know. So I can safely update my TV server and keep the clients...
Hello all,
is it possible to have an mixed MP environment consisting of a TV server V1.3.0 and clients with V1.2.3?
I have a...
1st stop - via the Remote settings panel in Config, set logging to extended, close config, run MePo, press the relevant buttons (plus a few others in order you know), then review logs.
If your seeing the key press in log, what is it mapped to - if you can figure that out, you can look at Remote Mapping and map what ever the key is...
1st stop - via the Remote settings panel in Config, set logging to extended, close config, run MePo, press the relevant buttons...
I have this remote:
http://www.cellularfactory.com/laptop/ACER/40/34770/692/
and it is working close to perfect, considering it was...
Removed all the plugin dll's, still the same.
Hope I don't mess up my tv server with the clean install.
Removed all the plugin dll's, still the same.
Hope I don't mess up my tv server with the clean install.
nothing comes up int he log
when trying to run the mediaportal configuration tool it also crashes,
last thing in the log is ...
Nothing, zip, nada... ;) (Just look @ your coffee cup, and it'll explain) :D :D :D
Nothing, zip, nada... ;) (Just look @ your coffee cup, and it'll explain) :D :D :D
not install I tried two computers. version 1.2.3 and 1.3 does the same.Windows 7 x64
My server is running with Server 2012 (had 2008 R2 before that) and it's working just fine with MP1. Got BDA Support enabled, so it also streams LiveTV over my network. Not sure how MP2 behaves on this OS.
My server is running with Server 2012 (had 2008 R2 before that) and it's working just fine with MP1. Got BDA Support enabled, so it...
I am putting the final touches on parts to build my new server.
I am located in a suburb of Chicago Illinois (USA) and have WOW...
And now the tv is working again..
Strange...
Tanx for the help :)
And now the tv is working again..
Strange...
Tanx for the help :)
I just did the upgrade to the version 1.3 but unfortunatly when i now try to start the TV Server it just stopes.
I did stop the TV...
@Vasilich Now scanning OK! (y) managed to work out what to leave out of the script from the link you kindly posted. o_O You saved me a lot of work there!
@Vasilich Now scanning OK! (y) managed to work out what to leave out of the script from the link you kindly posted. o_O You...
Hi,
Not sure if this is in the correct place or not, but I have just started to upgrade to 1.3 Final and started with the TV...
Thanks:) Great Answer
I have also just found this plugin...
https://www.team-mediaportal.com/extensions/system/backupsettings
so will give that a try too, and set a Windows restore point before installing 1.3.0.
If all else fails, I can always go back to the restore point and then upgrade when I have a few quiet hours!
Thanks:) Great Answer
I have also just found this plugin...
https://www.team-mediaportal.com/extensions/system/backupsettings...
I intend to upgrade from 1.2.3 to 1.30 tomorrow on a single-seat installation.
Other than stopping instances of MP and the TV...
Just recently got Win7, had Vista, and my tuner, Leadtek WinFast TV2000 XP Expert, seems to have issues with it. For one, no Win7 drivers you can readily find otherwise, but Windows Update provides one, so used that.
First time, I first installed the Vista driver I had, then updated to this, then installed the WinFast PVR2 software I...
Just recently got Win7, had Vista, and my tuner, Leadtek WinFast TV2000 XP Expert, seems to have issues with it. For one, no Win7...
Just recently got Win7, had Vista, and my tuner, Leadtek WinFast TV2000 XP Expert, seems to have issues with it. For one, no Win7...
Followed what you suggested, on restarting, it found a driver which was the one from april 2011 which on the TBS website is advertised as the one you suggested 2.0.1.5.
I did a system restore back to 1.3.0 (June 2010) and low and behold i started it up and it worked fine. Lets me record C4 HD and watch ITV HD and other channels and...
Followed what you suggested, on restarting, it found a driver which was the one from april 2011 which on the TBS website is...
Hi, I am using a TBS 6984 with MediaPortal, which I have been using for about 6 years with various different cards, so I am no...
Yep, i just see that you join irc but i was not here :)
Hope maybe later :)
Yep, i just see that you join irc but i was not here :)
Hope maybe later :)
I've attempted to find a thread that discusses this issues (as I am sure I'm not the only one having it) so please direct me toward...
Splendid, this did the trick. I must admit I was not quite expecting the IPTV tuner included in the latest release (even 1.3 RC) to be broken in that respect, while yours work just fine
Thanks for the tip
Splendid, this did the trick. I must admit I was not quite expecting the IPTV tuner included in the latest release (even 1.3 RC) to...
Good morning,
For some technical reason, I need to stream local video files using VLC (or any other method) and rtp protocol...
I think I might nearly have it after reading this forum.http://www.avsforum.com/t/1413542/radeon-5770-hdmi-onkyo-perfect-radeon-7850-hdmi-onkyo-random-audio-drops I am currently testing my audio direct through the TV as previously I had my PC feeding into the receiver and out to the TV and I am not receiving any audio cuts. I think...
I think I might nearly have it after reading this...
Hi ,
I'm currently experiencing difficulty with my audio when watching TV. Every couple of minutes my audio cuts out for a...
Strange issue with fresh 1.3.0 RC, 1.3.0 Final & 1.2.3. Anydvd hd, vitualclonedrive, & moving Pictures installed (logs attached of DVD iso playing & not playing)
DVD .iso's play (it takes about 45 seconds before it starts) from "My videos" but the same DVD .iso won't play from "moving pictures".
BluRay .iso's play from "My videos"...
Strange issue with fresh 1.3.0 RC, 1.3.0 Final & 1.2.3. Anydvd hd, vitualclonedrive, & moving Pictures installed (logs attached of...
Strange issue with fresh 1.3.0 RC, 1.3.0 Final & 1.2.3. Anydvd hd, vitualclonedrive, & moving Pictures installed (logs attached of...
But there is no solution for me. Thank you for support!
But there is no solution for me. Thank you for support!
I have problem with DVB-IP. I have m3u files, which works in VLC player and in Media Player too. When I put this file to...
Hi, please im having the same issue, on reboot something happens onreboot and all channels go to unmapped.
Hi, please im having the same issue, on reboot something happens onreboot and all channels go to unmapped.
MediaPortal Version: 1.0.2
MediaPortal Skin: StreamedMP
Windows Version: Windoz XP SP3
CPU Type: AMD AMx 3600+
HDD: Hitachi...
https://www.team-mediaportal.com/extensions/music/one-button-music will play random music from your local collection at the press of a button but there is no way of doing this without a button press as far as I know
https://www.team-mediaportal.com/extensions/music/one-button-music will play random music from your local collection at the press...
I posted something a while ago and no one seemed to respond so here goes again. Mediaportal is older and maybe now can do this...
Isn't it a bit harsh to call all people who devote lot of their free time for free to lazy? If it is not harsh in your opinion it will be at least a great way to demotivate people to look into the proposed change.
People did understand, you failed to understand the why it is not a risk for the 99.5% of the MP users.
If there...
Isn't it a bit harsh to call all people who devote lot of their free time for free to lazy? If it is not harsh in your opinion it...
Is there any plans to eventually allow for MP to run with a restricted account?
I have a separate MySQL server that I am using...