Problems with the TV-Server or MyTV frontend? Post them in here.
then you have general problem with your PC not waking up. Try to google why it doesn't wake up (one of the keywords can be ACPI, and some legacy drivers that prevent ACPI to work.). Note that is has nothing to do with mediaportal itself, but rather windows.
then you have general problem with your PC not waking up. Try to google why it doesn't wake up (one of the keywords can be ACPI...
Hello
I have a problem. The computer does not want to wake up before začátkerm recording. When I start the computer manually...
Hmmm, maybe the theory is incorrect. But what I did when I collected the logs was to start MediaPortal and wait for a long time, and the kill it. What I'm saying I did later was to let the settings application run without killing it. I'm thinking that maybe if I kill the settings app when it's not ready it will end up in some bade...
Hmmm, maybe the theory is incorrect. But what I did when I collected the logs was to start MediaPortal and wait for a long time...
Hi, I I am a new user migrating from windows media center. I had my two analog TV cards working since installation. Now one of the...
No, but how do I get it TVE3.5 and can I install it as TV Server only?
My setup is that I want TV Server install only and have kodi front end clients.
No, but how do I get it TVE3.5 and can I install it as TV Server only?
My setup is that I want TV Server install only and have...
MediaPortal Version: 1.2.1
MediaPortal Skin: Default
Windows Version: Windows 7 32bit home premium sp1
CPU Type: AMD Athlon(tm)...
Thanks!
Yes I read that later, about Channel mapping..I will edit my post for that later tonight. About removing the CI assignments, may be this helps, I do not know, but right now all channels seem to work OK though.
Thanks!
Yes I read that later, about Channel mapping..I will edit my post for that later tonight. About removing the CI...
Hi folks,
Since I could not find any complete tutorial for the installation of my new Digital Devices (DD) DuoFlex C/C2/T/T2 V3...
Any help?
Any help?
But I'm running TV Server 1.12 and have Terratec H7 and loosing CAM module after a few minutes and I have to reinsert it and after...
Hi Guys,
I already think I know what caused this PMT Not Found error...
The settings on the Alphacrypt were not good after all.. After setting everything as below, a rescan was done and all channels work normally (much quicker channel change then with the Floppy DTV) Thanks to LimpWhixkid for his tutorial somehwere on this forum...
Hi Guys,
I already think I know what caused this PMT Not Found error...
The settings on the Alphacrypt were not good after all...
Dear support team,
I do not know what has been changed or what I have done wrong.. The only thing that has changed is that I have...
Hi mm1352000!! I apologize for causing frustration at your end. I truly do appreciate all the help and time you have offered me. I have been in the IT industry for over 20 years. I am normally very good about putting packages like this in place. But this package really had me "on the roles." I was not expecting this to be so...
Hi mm1352000!! I apologize for causing frustration at your end. I truly do appreciate all the help and time you have offered me...
For almost one month now, I have been struggling to get a new DVR configured. Let me give you some history so that you know what...
Hi all.
I wanted to post my recent experience with my TV Server/NAS setup which caused me huge problems last week. Hopefully, by posting this, I will help someone else in the future having similar problems.
I have my system setup with the TV Server configured to record everything to one of the volumes on my NAS (D-Link Share Centre...
Hi all.
I wanted to post my recent experience with my TV Server/NAS setup which caused me huge problems last week. Hopefully, by...
Hi all.
I wanted to post my recent experience with my TV Server/NAS setup which caused me huge problems last week. Hopefully, by...
Thanks, installed final version and error has not re-occurred.
Thanks, installed final version and error has not re-occurred.
Hi All, since I have upgraded to the latest MP1 I keep experiencing this entry in the TV server log and TV service stops.
If try...
Hello and welcome Scott :)
Your situation sounds very unusual.
The times and timezones in the XMLTV file must be correct, as must the Windows time and timezone configuration on the server and each client.
Can you please:
Zip and attach the mc2xml tvguide.xml file that you're importing.
Attach a screenshot of your XMLTV plugin...
Hello and welcome Scott :)
Your situation sounds very unusual.
The times and timezones in the XMLTV file must be correct, as must...
First off I am new to Media Portal. I have been a long time MS Media Center user and finally decided it was time to make a change...
thise one the link :
https://forum.team-mediaportal.com/threads/audio-switching-bug-in-mediaportal-1-12.131227/page-4#post-1142818
thise one the link :
https://forum.team-mediaportal.com/threads/audio-switching-bug-in-mediaportal-1-12.131227/page-4#post-1142818
Hello,
since a couple of weeks (mybe since 1.12 pre, now I'm on final) I have a Problem with watching TV:
After resuming from...
That's a very interesting tip, thanks! Unfortunately, the output from the front panel jack on my HTPC is just as noisy as it is from the rear panel.
Thanks anyway.
That's a very interesting tip, thanks! Unfortunately, the output from the front panel jack on my HTPC is just as noisy as it is...
In the last several MP versions I have had problems with missing foreground audio on some channels, or only on certain programs on...
Reception on Channel 'WUCW HD' looks bad (there are a lot of 'Continuity error...' messages in the server TsWriter.log after it's been tuned).
Otherwise the TV server logs look OK.
Since you are using Kodi as the client, you probably need to ask over in their forums for help - I've never used Kodi.
From the symptoms you describe...
Reception on Channel 'WUCW HD' looks bad (there are a lot of 'Continuity error...' messages in the server TsWriter.log after it's...
Fair warning, I am a newb to MediaPortal so please forgive me if my questions have been answered numerous time before.
Setup...
No I only tried it once in the client, watching Prime7. You are right WIN is not working (signal strength too low?).
So maybe it is a problem with the router? I just checked and multicast forwarding was disabled, but I have enabled it and set the rate to 300 and now I am getting about 8.5 MB/s consistently, but that still seems low...
No I only tried it once in the client, watching Prime7. You are right WIN is not working (signal strength too low?).
So maybe it...
Hi,
I have MediaPortal running on a PC (Windows 10) in the lounge room and I want to watch live TV on my laptop (Windows 10). I...
Yup, a restart resolved it; should've thought of that. Thanks for the quick reply--
Yup, a restart resolved it; should've thought of that. Thanks for the quick reply--
I have an HDHomeRun dual tuner, on Windows 10 64-bit. AMD FX-8350 Eight-Core, 4.00GHz, 16GB RAM. Channels can be viewed using the...
You can also get quad-tuner PCI-E cards (for those occasions when you want to record from four MUXes simultaneously). I have two TBS 6284 quad tuner cards (a result of having used WMC before MP). Although that particular card is discontinued, there is a newer quad-tuner card available from TBS.
-- from CyberSimian in the UK
You can also get quad-tuner PCI-E cards (for those occasions when you want to record from four MUXes simultaneously). I have two...
We've just moved into a new house and im toying around with ideas for the new setup of our server and clients.
The main thing im...
Hi again.
After not being able to solve the problem i've now installed a second TV Card in the HTPC-Server, a TBS 6922 DVS-2 card.
I've then mapped the affected channels solely to this new card. After one week of testing the problem is gone so far.
As is used the same cable and satelite connector i can exclude the cable, signal...
Hi again.
After not being able to solve the problem i've now installed a second TV Card in the HTPC-Server, a TBS 6922 DVS-2 card...
Hi all,
i've got a problem with my mediaportal installation from time to time (quite regulary).
For this post i tried to reproduce...
Great. :)
Don't hesitate to say something if those threads don't help or if you have any further questions. It is easy to waste a lot of time trying to resolve such problems alone, and we're here to help you.
Great. :)
Don't hesitate to say something if those threads don't help or if you have any further questions. It is easy to waste a...
Hi I am having a problem where the TV Tuner will not stop being active after it has started.
It stays on after I press stop in...
The recent m$ft changes for win10 no wmc, epg changes for current vista/win7/win8 wmc, probably generated lots of traffic. mc2xml was online last night, new month/quota?
The recent m$ft changes for win10 no wmc, epg changes for current vista/win7/win8 wmc, probably generated lots of traffic. mc2xml...
Greetings!!
First time poster. I did my due diligence to find my answer, but I'm not sure if I am searching correctly...so, here...
wow thanks a lot. didn't realize that they were split out for each individual tuner.
wow thanks a lot. didn't realize that they were split out for each individual tuner.
so...if i'm on the computer that actually has the Ceton 4 tuners...why can't I record one channel and watch another which would...
The other possibility is of course that electrical (radio) interference from the new video card is directly interfering with reception at the tuner card inputs.
The other possibility is of course that electrical (radio) interference from the new video card is directly interfering with...
I have been watching & using the TV through Mediaportal without any issues.
Then a few days ago I took out my old GeForce 260GTX...
Thanks for the guys. I am out of town until Sunday so I will try these things when I get back and report my results. Much appreciated!
Thanks for the guys. I am out of town until Sunday so I will try these things when I get back and report my results. Much appreciated!
Hi folks,
I am new to MediaPortal. I just built a new computer and decided to put Windows 10 on it. A friend of mine gave me his...
On MP 1.12, XMLTV has just stopped importing programs from SchedulesDirect tvguide.xml. It imports the channels, but not the...
Ah. I understand.
Tony
Ah. I understand.
Tony
Hello
I am in the UK and two channels, BBC Three and BBC Four are off the air much of the day - it is on air between 19:00 and...
No. If it is just a tuning detail update, please post the update here:
https://forum.team-mediaportal.com/forums/submit-epg-grabbers-and-tuningdetails.296/
...or we could move this thread there.
No. If it is just a tuning detail update, please post the update here...
Hi,
after some frequency changes unitymedia made last days (113 MHz -> 114 MHz, 121 MHz -> 122 MHz, 129 MHz -> 130 MHz) a new...
Your recommendation regarding the windows logs to search was very helpful. I found a problem with my scanner driver that was putting the computer in a bad state when it went to sleep. When I woke it manually, whatever was wrong would self-correct, but when Powerscheduler was waking it, the computer would crap the bed.
Fixing the...
Your recommendation regarding the windows logs to search was very helpful. I found a problem with my scanner driver that was...
So, I'm having an issue with my PC that occurs after the TV-Server wakes up to grab EPG or do a recording.
It may simply be a...
Has been running all weekend and so far not 1 crash :)
Has been running all weekend and so far not 1 crash :)
My TV server is randomly crashing and I can't see why.
I've attached the logs but none of it really makes much sense to me.
Doh, my router died and I had to replace it so my static ip moved.
Thanks again!
Doh, my router died and I had to replace it so my static ip moved.
Thanks again!
Today I went to watch TV and it froze the frontend, so I restarted everything and went to look at the TV server settings and was...
I tried erasing the EPG database, that didn't help at all. There were NO good channels, all of them were not found. I did try using the channel select in MePo, and had HDHR config open, as you suggested. MePo definitely sent a command to the tuner, it did go to the channel requested, and HDHR config would show the channel tuned...
I tried erasing the EPG database, that didn't help at all. There were NO good channels, all of them were not found. I did try...
Hello, new user here, like many looking for an alternative to windows media center. I installed and setup Mediaportal 1, using the...
Thank you for the response.
I ran Filmerit and found one error that is saying missing files. I found the related folder MPUrlSourceSplitter in a TV server backup folder (must be created when I tried installation of different versions). I copied MPUrlSourceSplitter to the current version. Then Filmerit said: 0 error among 270 filters...
Thank you for the response.
I ran Filmerit and found one error that is saying missing files. I found the related folder...
I've been using MP1.9 on my Win7 (64bit) for many years. Last weekend I tried to get my USB video grabber (nothing to do with MP)...