Problems with the TV-Server or MyTV frontend? Post them in here.
I would be very thankfull if could do this.
It was so suprising without any warning it crashed. After switching to MySQL 5.6 (8 maybe more months ago), this was my first crash.
I would be very thankfull if could do this.
It was so suprising without any warning it crashed. After switching to MySQL 5.6 (8...
Hello everyone,
for a long time I have a problem which prevents me from using the automatic restart function of the...
Ahhhh, okay. I see. I didn't read the log files carefully enough.
The log file shows that you attempt to tune BBC 1 South East. The first tuner locks in on signal fine but for some reason [which I can't see without the TV Server error log - I'm assuming there is one] fails to start timeshifting. TV Server then tries the second tuner...
Ahhhh, okay. I see. I didn't read the log files carefully enough.
The log file shows that you attempt to tune BBC 1 South East...
Hello,
I have been happily watching TV for 5 days, but suddenly today I turn on the TV and get the No Signal error. However when...
Ok, do not ask my any explaination...I have installed the new PowerDVD codecs (13+) and the issue with the mentioned HD channels has disappeared! The interesting thing is that if I put back LAV, PowerDVD (10+) or native Microsoft codecs, the issue is still there! So it seems that the codec may improve the performances in the signal...
Ok, do not ask my any explaination...I have installed the new PowerDVD codecs (13+) and the issue with the mentioned HD channels...
Hi All,
Just to report you my issue (I have attached a video that explains better what is happening) when trying to watch some HD...
Thx for your assistance!
I'm using the "Clickfinder EPG". I will have a look if there is a way to schedule the import somehow.
Do you think that is fortune that I have never seen this while only one tuner was active?
Thx for your assistance!
I'm using the "Clickfinder EPG". I will have a look if there is a way to schedule the import somehow.
Do...
I'm moving from this thread in the bugreport section to here, because I don't think that this is a tv server problem anymore...
Thanks.
Good feature, but I've not heard about such to be used in iptv, all streams known for me are 1 transport stream=1 channel.
Quick googling shows mythtv developer doesn't heard either: http://www.mythtv.org/pipermail/mythtv-dev/2013-January/073246.html :)
And I believe for compatibility reasons it's unlikely someone will start...
Thanks.
Good feature, but I've not heard about such to be used in iptv, all streams known for me are 1 transport stream=1 channel...
Hello,
my provider adds new/deletes iptv channels quite often.
His preferred solution is the software, named IPTV player, where...
I am happily using MP since several years - mainly for watching TV and movies. Unfortunately, I have never been able to get TV sound/picture 100% correct w/o any issues.
Until version 1.5 I used RTSP streaming. We were able to watch TV but the pictures always stuttered about once or twice within 5 minutes. Installing 1.6 did not...
I am happily using MP since several years - mainly for watching TV and movies. Unfortunately, I have never been able to get TV...
I am happily using MP since several years - mainly for watching TV and movies. Unfortunately, I have never been able to get TV...
Thank you to Vasilich and mm1352000 for your time and quick responses. The problem is now fixed :)
Time to donate to the cause :)
Cheers
Shadime
Thank you to Vasilich and mm1352000 for your time and quick responses. The problem is now fixed :)
Time to donate to the cause :)...
Out of the blue the TV server stopped working.
In mediaportal it states no free card and when I try to start TV service from...
Yeah, I edited my post to a hvr-1600. I'm curious.... I may try this out later this week if I can find a power supply for old car portable radio. I'll do a little googling on the hvr-1600 in the meantime. I'm pretty sure i have one of those hanging out the basement too.
Yeah, I edited my post to a hvr-1600. I'm curious.... I may try this out later this week if I can find a power supply for old car...
Does anyone know if it is possible to capture audio output *without video* and playback within MediaPortal?
The reason I ask is...
Two full days, and no freezes. This is awesome :)
Thank you both for your efforts - I greatly appreciate it!
Two full days, and no freezes. This is awesome :)
Thank you both for your efforts - I greatly appreciate it!
Good afternoon,
I'm breaking this off of another thread, since the issue I'm experiencing no longer seems to be related to the...
Thank you for your answer. The last days i reflect, to get better informations and more details. Now i will update MP to the last version an check my recordings every day. I hope so to get the right Informations to generate a new Topic in the german forum.
Best regards
Zenthrix
Thank you for your answer. The last days i reflect, to get better informations and more details. Now i will update MP to the last...
Hello,
I have sometimes the problem, that my Digital Device S2 with CAM Modul can't decrypt a TV Show in HD+.
If this happens I...
...or you could update to MP 1.6 and follow the procedure here:
https://forum.team-mediaportal.com/threads/mediaportal-1-6-0-pre-release-ready-for-download.122865/page-2#post-1041540
...to update/upgrade your database. This should prevent the problem from occurring in the future.
...or you could update to MP 1.6 and follow the procedure here...
Having a problem with the in-laws system I built - been working fine for weeks but has since gone wrong and I cant figure out why...
So... Watched about 20 minutes or so of both HD and SD live TV last night. Looked good throughout. So I guess my issue here is solved. Thanks to you folks for your help. I never did get a chance to get to the new logs after the Boss came home. I'll try to do that tonight.
Oh... and I'll probably still put that additional HDD in the...
So... Watched about 20 minutes or so of both HD and SD live TV last night. Looked good throughout. So I guess my issue here is...
So... I can connect to the TV Server and Live TV will work on this client PC (connected via home network). The problem is...
@mm1352000 you are a god!!! Thank you again for this...
@mm1352000 you are a god!!! Thank you again for this...
Hi to all of you...
I am not quite sure wheather my "problem" rather is a feature of DVBVIewer...
DVBViewer is able to show with my...
It's much simpler than that: a single virtual machine with two OS (dual-boot), one being Windows 7 and the other Linux (Mythbuntu).
I recently saw a new post in this thread with a package including InterVideo's software encoder (among others) so I guess I'll give it a try (I tried MainConcept's, ATI's and Cyberlink's but I had...
It's much simpler than that: a single virtual machine with two OS (dual-boot), one being Windows 7 and the other Linux (Mythbuntu)...
System Type:TV-Server only
MP-Version:1.5.0
Windows Version:Windows 7 SP1 (x86)
CPU:Virtual: QEMU Virtual CPU 1.1.2 (2 x 3.1 GHz)...
Also remove the 'select.wav' (or whatever .wav file is listed) from the MP Config setup (under Keys and Sounds) and specifically assigned to "Select" action. I have just proven this to increase speed.
Also remove the 'select.wav' (or whatever .wav file is listed) from the MP Config setup (under Keys and Sounds) and specifically...
Is there anything I can do to speed up channel switching?
For me it takes 2-3 seconds on every channel regardless of channel type...
Hey, i switched from an WLAN-dongle to a network connection through powerline. In windows the internet connection still worked, in MePo the weather data is updated. So i thought everything is fine.
But since the switch i have no TV signal !?
In tvserver config there is the correct ip, 192.168.178.20. Its the ip from my server/client...
Hey, i switched from an WLAN-dongle to a network connection through powerline. In windows the internet connection still worked, in...
Hey, i switched from an WLAN-dongle to a network connection through powerline. In windows the internet connection still worked, in...
I have MP 1.6. I get stuttering watching TV, Watching recorded TV both in single seat and on clients. On the single seat I have more stuttering than on Clients. Sometimes I can Watch TV for half an hour or so without stuttering, and sometimes the TV do not start at all, I get a blank screen.
Attached is MP log I got when the TV don't...
I have MP 1.6. I get stuttering watching TV, Watching recorded TV both in single seat and on clients. On the single seat I have...
I have MP 1.6. I get stuttering watching TV, Watching recorded TV both in single seat and on clients. On the single seat I have...
Thanks beamland :)
Unless you had previously saved those settings, the values that were shown were not necessarily the ones that MP was using. In other words, it might have shown MP Audio Renderer when you first loaded configuration... but that doesn't mean MP was using the MP Audio Renderer before that time. Only logs could have...
Thanks beamland :)
Unless you had previously saved those settings, the values that were shown were not necessarily the ones that...
Hi there
Powering on my HTPC and starting to watch live tv on whatever channel I choose works fine. I get video and audio as...
i am facing problem with db connect if any one help setting up i can donote some thing to thiss service and concren person helped me need to setup iptvplatfrom with this
i am facing problem with db connect if any one help setting up i can donote some thing to thiss service and concren person helped...
=tvengine3-09-14-2007--01-25h--Rev15881:
0.2.3 RC2:
Blue Two Wide:
XP SP2@Client, 2003 SP2@tv server:
Intel Core2Duo @...
Excellent :-)
Cheers buddy.
Excellent :-)
Cheers buddy.
@mm1352000
Quick question, does MP TVE3 use any more memory than idle when recording or timeshifting multiple channels? I'm...
Here is also a similar Problem:
https://forum.team-mediaportal.com/threads/tv-server-doesnt-stop-scheduled-recordings.122668/page-3#post-1049875
I don't understand the mentioned thread, this one is talking about stoped recordings, but we have the problem that they are NOT stoping.Here is also this Problem
Here is also a similar Problem...
Hello,
Before sendind any logs, I wanted to ask if someone already encountered this issue.
When I schedule a recording, it starts...
Still looks problematic to me...
Still looks problematic to me...
I've followed the guidelines from here from top to bottom with no luck. I've tried a clean install of the latest version of Media...
Hi agold,
The easiest way to run your anysee TV card is to use MP2.
https://www.team-mediaportal.com/mediaportal-download
To watch TV you need to install the "SlimTV - NativeTV" plugin
https://www.team-mediaportal.com/extensions/slimtv-nativetv
Make sure that you first install NET4.5.1.
If you have any questions, please start a new...
Hi agold,
The easiest way to run your anysee TV card is to use MP2.
https://www.team-mediaportal.com/mediaportal-download
To watch...
Sounds good - So, I will have now my first attempt in compiling a Git-version. I see my wife already signing the divorce-papers ...
Ah... Yes... Starting to loose control over the development :oops:. I've had my fair screwed DB's - be it MovPic, TVSereies or TV :(.
Ah... Yes... Starting to loose control over the development :oops:. I've had my fair screwed DB's - be it MovPic, TVSereies or TV :(.
Suddenly* MP-server won't timeshift any channels.
From log I get:
Gentle.Common.GentleException: show columns from `program` --->...
I had the same problem with the avm vpn drivers. Took me also some time to figure this out :/
Sadly I saw the thread just now oO
And merry christmas to you all :)
I had the same problem with the avm vpn drivers. Took me also some time to figure this out :/
Sadly I saw the thread just now oO...
I try to watch tv or recordings from a Client. Does not work.
The logs show the try to watch a recording.
It is strange to me that...
I finally did. And it was the firewall that was causing the problem.
The below illustration is in danish - but it says that the MediaPortal app is only allowed access to public network - not private.
I ticked the private box - and now it works.
Thank you.
I finally did. And it was the firewall that was causing the problem.
The below illustration is in danish - but it says that the...
I have a mulit-seat installation with a couple of clients (Win7) which have been updated from 1.3.0 to 1.5. There's no problem with...
The reason I linked the another thread here:
https://forum.team-mediaportal.com/threads/continuity-error-scheduled-recording-doesnt-stop.121872/#post-1041017
...was to try and gather input and testing from everybody experiencing this problem in one place. That hasn't really worked.
lewiskingy please could you stop posting in this...
The reason I linked the another thread here...
I just started using MediPortal so forgive me for my limited knowledge on the product. I have 3 tuners configured on a Windows 8...
Ok, thanks :)
Ok, thanks :)
Some of my channels, which are on UK DVB-T and DVB-T2 are not used during the day, as broadcasts begin at 7pm. During the daytime...
To close this off, I resolved this finally by reinstalling MP. Though I had tried that earlier, after all of the above steps this seems to have fixed it. Thanks all.
To close this off, I resolved this finally by reinstalling MP. Though I had tried that earlier, after all of the above steps this...
I have recently had a similar issue which was resolved by restoring an original version of gentle.config.
I have a single PC...
Great (!!!)... but, strange. I'd also like to have known what was going on, but I'm happier that it is working. :)
You're most welcome. Any time. :)
I think we're good, but thanks for the offer. :)
Great (!!!)... but, strange. I'd also like to have known what was going on, but I'm happier that it is working. :)
You're most...
Ever since the power went out this morning, i can't view tv.
The tv server appears to be starting, i'm getting full tv guide/EPG...