Post problems you have when using MediaPortal,
or pre installation questions in here.
Code is fine and will setup Mediaportal dev box tomorrow but see no issues with it as most of CSAudio is meant as drop-in replacement :)
Code is fine and will setup Mediaportal dev box tomorrow but see no issues with it as most of CSAudio is meant as drop-in...
Hi,
Been debugging an issue with @Virtual in the AudioSwitcher topic and is as follows:
- Start Mediaportal with volume control...
As a last-ditch attempt I did a mysqlcheck of the database and that fixed it.
As a last-ditch attempt I did a mysqlcheck of the database and that fixed it.
TV Server 1.18.0
Windows 7 32-bit
After the computer restarted, due probably to over heating the CPU (hot room), Windows is...
Link added :P
Link added :P
Hi,
First off, thanks for maintaining the steady release cycle of mediaportal, always good to see things continuing!.
However the...
Never mind. Problem cleared up somehow.
Never mind. Problem cleared up somehow.
Never mind. Problem cleared up somehow.
I am trying to cause MP to open in my third monitor in windowed mode. In MP config, when I try to un-check Start MediaPortal in fullscreen mode, the checkmark remains. Other options can be unchecked and checked at will.
When I inspect the Windows shortcut settings, the target is set to MediaPortal.exe without command line options...
I am trying to cause MP to open in my third monitor in windowed mode. In MP config, when I try to un-check Start MediaPortal in...
I am trying to cause MP to open in my third monitor in windowed mode. In MP config, when I try to un-check Start MediaPortal in...
MP1
MP2
Mediaportal crashes (stopped working error) when playing a video on moving pictures or mp tv series
DE
Hey man, working around the idea of a subtitle issue, i entered the settings of mediaportal and set the plugin to automatically select codecs. (had done this from configuration previously but it was a temporary fix) and now everything seems to be working perfectly. Thanks a lot! God Bless
Hey man, working around the idea of a subtitle issue, i entered the settings of mediaportal and set the plugin to automatically...
I have been using mediaportal for ages. Bought a new laptop win 10 64 bit, 6 gb ram and 2gb radeon m530 series. i7 7th generation...
Cal,
I'd like to strongly emphasize once again that v1.2.3 is so old that I don't remember the nitty gritty details of how it works. The one thing I can say with certainty is that the "channel number" column that you've been looking at does contain what TV Server considers to be the logical/virtual channel number. The fact that those...
Cal,
I'd like to strongly emphasize once again that v1.2.3 is so old that I don't remember the nitty gritty details of how it...
What exactly are the numbers displayed under the subject column? Specific detail would be helpful. This is for clear QAM...
Hello,
I would like to ask you for a proper firewall setting for a case TV server - MP client for My SQL.
What should be configured in firewall for:
a) TV server
incomming rules?
outgoing rules?
b) MP client
incomming rules?
outgoing rules?
Such information I could not find in wiki.
Many thanks,
marttoma
Hello,
I would like to ask you for a proper firewall setting for a case TV server - MP client for My SQL.
What should be...
Hello,
I would like to ask you for a proper firewall setting for a case TV server - MP client for My SQL.
What should be...
Please ignore this post
I got impatient and not being able to find alternative files I installed using incompatible plugin, which of course did not work just as before some weeks ago
I spent a bit more time and discovered the problem was that I did not have the audio output on the motherboard connected to a loudspeaker
Shoved a cable...
Please ignore this post
I got impatient and not being able to find alternative files I installed using incompatible plugin, which...
Please ignore this post
I got impatient and not being able to find alternative files I installed using incompatible plugin, which...
Points taken!
As for the problem itself, it's now gone away. i.e. The recorded TV videos (those that didn't play yesterday) are now all playing. The only change I made was to re-instal the audio drivers from ASUS (specific to my P8Z77-V PRO motherboard) as my headphones had stopped working. No idea if it's related but both issues...
Points taken!
As for the problem itself, it's now gone away. i.e. The recorded TV videos (those that didn't play yesterday) are...
Hi, Earlier today, I was successfully watching a .ts TV recorded film. Tried the watch the rest of this afternoon but (a) the film...
Check the settings for each drive.
Check the settings for each drive.
After my update to 1.18 and switch from Web EPG to Schedules Direct, My wife is telling me her soaps never record. Other programs...
Hi Remoteglen, it's a problem with AMD grafics too. See Win10 falls creators update problems watching videos
Hi Remoteglen, it's a problem with AMD grafics too. See Win10 falls creators update problems watching videos
Hi guys
Lately MP has been going to a black screen when I select something to watch and I have to press control alt delete to...
I personally haven't received any PM, but either way, I don't think there's much more that I can offer you. Owlsroost is the expert when it comes to problems with client-side playback.
As I've previously said, I don't read too much into this.
This is partially right and partially wrong.
Yes, MediaPortal has a service ("TV Server" /...
I personally haven't received any PM, but either way, I don't think there's much more that I can offer you. Owlsroost is the expert...
I'm trying to use MP as a PVR back-end to enable time-shifting and recording of an IP video stream. The stream is coming from a...
Well it is now nearly 2 years since I had this problem (don't even remember which version I was using then) and it has never returned since changing that setting.
I'm now on MP 1.18 and it is still OK with mounting .iso so it certainly fixed it for me.:)
@tandoni You might be wise to start a new thread and include logs.;)
UPDATE:-
I...
Well it is now nearly 2 years since I had this problem (don't even remember which version I was using then) and it has never...
Following the playback of a Disk Image, if I ever close and restart MP I get this "No Disk" message (see attached screenshot)...
This seems to be a common problem, I saw much the same as did others. What has changed with 1.18 final mpecore.dll I have never seen this with previous MP1 versions including 1.18pre? I fully accept that it seems to be an issue with MS Defender, I had no problem on my desktop PC which uses a far more, supposably, stringent AV but...
This seems to be a common problem, I saw much the same as did others. What has changed with 1.18 final mpecore.dll I have never...
As it says....MP Extensions won't open, and I've just gone to 1.18.0 Final.
Would logs help.....and if so, which 'level' (type?) of...
You're very welcome, any time.
Always nice to be able to help a fellow Kiwi. :)
You're very welcome, any time.
Always nice to be able to help a fellow Kiwi. :)
Long time user, first time poster.
Mediaportal has been working fantastically for us for several years, but recently the TV Server...
Following removal of a particularly persistent and nasty Chromesearch.today hi-jacking from Google Chrome, I noticed that ONline videos only works in a limited way.... when trying to access BBC iPlayer
It doesn't allow me to access video categories....say Comedy for example, and returns error message "Timeout getting dynamic...
Following removal of a particularly persistent and nasty Chromesearch.today hi-jacking from Google Chrome, I noticed that ONline...
Following removal of a particularly persistent and nasty Chromesearch.today hi-jacking from Google Chrome, I noticed that ONline...
Yes.
You can enable debug-level logging:
Close MediaPortal.
Open MediaPortal Configuration.
Go to the "general" section.
Change "log verbosity" to "debug".
Click OK to close and save.
Yes.
You can enable debug-level logging:
Close MediaPortal.
Open MediaPortal Configuration.
Go to the "general" section.
Change...
regularly after resume Mediaportal is minimised and will not respond.
Sometimes if I alt tab it will take focus and then exit and...
Hi,
With the latest version of MP1 I get a strange hanging client issues. So the server in the loft with all the tv cards. I can be watching TV on a client and all is fine, I switch channels on the same client and it hangs and I have to kill it. Restarting the client and it then works fine. The server shows the channel switch but...
Hi,
With the latest version of MP1 I get a strange hanging client issues. So the server in the loft with all the tv cards. I can...
Hi,
With the latest version of MP1 I get a strange hanging client issues. So the server in the loft with all the tv cards. I can...
Stále mám kablstar hd2 technisat a nechodím. Společnost Cablestar pracuje a pracuje jako technik dvbviewer.
Stále mám kablstar hd2 technisat a nechodím. Společnost Cablestar pracuje a pracuje jako technik dvbviewer.
Hello, they can not run encoded channels dvb-c. The tv-viewer program will play the coded channel. It always worked without a...
Sorry, missed your log files until now.
First impressions are interesting.
Continuities start at 9:38 PM on 18 October. At that time you have 3 active recordings:
tuner 3 - SBS ONE HD 8:01 PM-9:29 PM Sunshine [your post record setting is 30 minutes, so this actually stops at 9:59 PM]
tuner 4 - TEN HD 8:09 PM-10:42 PM The Wrong...
Sorry, missed your log files until now.
First impressions are interesting.
Continuities start at 9:38 PM on 18 October. At that...
Hi,
I have 2 HDHomeRun connects recording with MediaPortal 1 and for the life of me cannot work out why I'm getting glitches on...
Hello
Are the recordings also not listed in the MediaPortal front end unless you manually import them?
Do you move the recordings at any stage?
Does the TV service (TVservice.exe) have the necessary permissions to read and write to the network share?
What happens if you try recording to a local drive (recommended!)?
Hello
Are the recordings also not listed in the MediaPortal front end unless you manually import them?
Do you move the recordings...
I use MP v1.x as the backend of my PVR which is accessed via Kodi clients.
Works OK with one exception.
Recordings are saved to...
Server address and name have not changed. I can ping the server with the same name or address. I have switched to UNC paths instead of RTSP and everything is running ok now (and MUCH faster too; I can now use skip steps without problems...)
Server address and name have not changed. I can ping the server with the same name or address. I have switched to UNC paths instead...
After installing this weeks Windows 10 update on my dedicated MediaPortal server PC, I cannot playback recordings anymore on my...
Far from dying - just quiet:cool:
To remove from main interface, you mean set it as plugin in plugins section - then just navigate to it with remote and select plugins then select which one, then remote and/or kbd|mouse works.
Can confirm that Short cutter works with 1.18, so direct from remote, need to pick remote/kbd key to map...
Far from dying - just quiet:cool:
To remove from main interface, you mean set it as plugin in plugins section - then just navigate...
I am going to remove settings from the main interface. Will just have a remote, no keyboard for daily use and restrict access to...
Hi mm
Thanks for your quick reply, I did a system restore back to before the 15th and it works now(y)
I did some intel updates for the NUC on that date so I guess that might have been the issue.
It doesn't always pay to update for the sake of updating:p
Best to leave well enough alone ;)
Thanks again..
Hi mm
Thanks for your quick reply, I did a system restore back to before the 15th and it works now(y)
I did some intel updates...
Hi guys
I started MP today and for some reason I have no sound.
When I select a show it doesn't start and I have to select it...
Problem solved - if anyone has a similar problem - 100% CPU and PC freeze was caused by a plug-in (strange enough).
Still have to find our which one - but after disabling all plug ins - CPU stays below 15% and stayes there.
I will enable now one by one an see what is the root cause.
Problem solved - if anyone has a similar problem - 100% CPU and PC freeze was caused by a plug-in (strange enough).
Still have to...
Hi,
I have a strange problem which never occured in 8 years usage of Mediaportal...
I haven't touched changed the configuration...
On the DefaultWIdeHD skin there is a menu that pops out from the left in certain situations. Not overly concerned. Or wasn't. Found what I call a flaw. When you password protect the settings page, and cancel out of entering the password, the page goes to a vertical menu instead of horizontal. You can keep hitting back and it will...
On the DefaultWIdeHD skin there is a menu that pops out from the left in certain situations. Not overly concerned. Or wasn't...
On the DefaultWIdeHD skin there is a menu that pops out from the left in certain situations. Not overly concerned. Or wasn't...
Yes, that Windows Update brought the pc down for a few days. I couldn't get it to boot. Eventually I got it to boot but the video and audio drivers were hosed. It took me about a week to get the pc working right.
It could be that it has been giving me that error since the update? But I remember it starting since the Ramdrive.. I...
Yes, that Windows Update brought the pc down for a few days. I couldn't get it to boot. Eventually I got it to boot but the video...
A couple times a week I have been waking up to MediaPortal crashing with the Windows error "MediaPortal has stopped working". I've...
Just keep in mind that the eHome transceiver can only be used by one program at a time. Since IRSS needs to control the blaster, IRSS also has to control the receiver. That means HID and any other remote settings must be disabled in MediaPortal Configuration.
Just keep in mind that the eHome transceiver can only be used by one program at a time. Since IRSS needs to control the blaster...
Hello.
Been experiencing some very strange recording behavior over recent weeks.
For some reason, MP has started scheduling...
I am trying to play LiveTV video within RadioTime plug-in and can't get any video channels to play. All the radio channels play fine.
Most of the video files are Windows Media Video v8/9/10
I made sure both wmv3 wmv10 codecs in LAV and FFDshow are checked.
I see that RadioTime is now a new software company called TuneIn
How do I find...
I am trying to play LiveTV video within RadioTime plug-in and can't get any video channels to play. All the radio channels play...
I am trying to play LiveTV video within RadioTime plug-in and can't get any video channels to play. All the radio channels play...