Post problems you have when using MediaPortal,
or pre installation questions in here.
I found a partial solution here:
XBMC not connecting to MediaPortal
multiseat is not required, and I have the guide and videos playing in Kodi now. I can't get the live TV working but that's for a different thread.
I found a partial solution here:
XBMC not connecting to MediaPortal
multiseat is not required, and I have the guide and videos...
I wonder if someone can help me with this. I currently have a single seat set up, but want to access the live TV, guide, etc but...
Okay.
Without access to more information - particularly log files - I can only speculate...
The frequencies that TV Server (MediaPortal) version 1.17 scans when you select "Australia" -> "NSW - Sydney" match the details found at the linked website, and also the details on the official ACMA website. Therefore, all channels should be...
Okay.
Without access to more information - particularly log files - I can only speculate...
The frequencies that TV Server...
Because of the lag of Live TV (Sydney Australia) I decided to clear all and rescanned them again.
I selected NSW Sydney and did a...
Windows message is :- The TVService service on Local Computer started and the stopped. Some services stop automatically if they are not in use by other services or programs.
I have tried to uninstall and reinstall MP but the TVService still fails. MP was working perfectly about a week ago, no software has been installed since the...
Windows message is :- The TVService service on Local Computer started and the stopped. Some services stop automatically if they are...
Windows message is :- The TVService service on Local Computer started and the stopped. Some services stop automatically if they are...
don't see any log attached.
don't see any log attached.
TV starts up, work for a minute and error box pops up and screen freezes. Only happens to one of three clients. Server and other...
Thanks @mm1352000
I have changed back from mpar to defautl direct. So far so good on live tv
I have noticed a delay when streaming from my server. But have only seen this once. So will keep an eye on it
Thanks again
Thanks @mm1352000
I have changed back from mpar to defautl direct. So far so good on live tv
I have noticed a delay when...
After resolving some stuttering playback issues, i now have a audio sync problem.
It tends to get worse as i continue viewing. It...
Thanks a lot MM for the excellent explanations!! I couldn't have asked for better. Its not the first time I ask questions and you always provide great info, extra donation sent!
It makes a lot of sense now, I wasn't aware that the guide would change at the last minute like that but now that I think about it, I believe I had on a few...
Thanks a lot MM for the excellent explanations!! I couldn't have asked for better. Its not the first time I ask questions and you...
Hello,
A question about scheduled recordings. I am trying to optimise things a little bit and found that my tvserver would wakeup...
Updating DotNet from version 4.0 to 4.6.2 solved this problem ... somehow
Updating DotNet from version 4.0 to 4.6.2 solved this problem ... somehow
When starting MediaPortal the program crashes after a short time (a few seconds up to some minutes).
This happens in all...
Hello,
I tried adding Google drive via Expandrive to the Videos Section but it just hangs and tries to search it - it works perfect in windows and can browser around without issues and can play videos.
Has anyone else managed to get anything similar working?
Hello,
I tried adding Google drive via Expandrive to the Videos Section but it just hangs and tries to search it - it works...
Hello,
I tried adding Google drive via Expandrive to the Videos Section but it just hangs and tries to search it - it works...
@longjohn119 Try to stick to one issue per thread that makes it a lot easier for the community to help you out.
I'll close that thread assuming your issue was about changing your computer name / hostname.
Please do open other threads if you have other issues needing support.
@longjohn119 Try to stick to one issue per thread that makes it a lot easier for the community to help you out.
I'll close that...
New computer system install and it was a fight (tuner scan doesn't work right for American ClearQAM and hasn't for quite some time)...
I think we have done all we can then, and I'll try and appease the wife somehow. Maybe turn off screensaver or make it go to the home menu, hopefully that will stop the tv from freezing up.
Thanx for you help even though we couldn't reach a solution.
I think I found the reason for the server loss, and maybe the crash.
My damn...
I think we have done all we can then, and I'll try and appease the wife somehow. Maybe turn off screensaver or make it go to the...
Hi guys hope you can help, this is very important do the WAF. Every time I switch on the tv I get a "No Input" and have to press a...
I have Windows 10 Pro and WMP installed. it is working with playing from F:CDdrive where CD was inserted. I copied to NAS server and it is working from the NAS.
However, my earlier Music Albums 500 (ripped on Nasserver from Original CDs,which not available anymore)) trying to play and then WMP gives error. Probably due to 10x...
I have Windows 10 Pro and WMP installed. it is working with playing from F:CDdrive where CD was inserted. I copied to NAS server...
I have Windows 10 Pro and WMP installed. it is working with playing from F:CDdrive where CD was inserted. I copied to NAS server...
I presume it would be something like that, yes.
However...!
Although I know a fair amount about CableCARD tuners (I'm the person who added CableCARD tuner support to MediaPortal), please keep in mind I'm not a Spectrum customer... and in fact I reside in New Zealand, so I've never owned a CableCARD tuner myself.
There are some...
I presume it would be something like that, yes.
However...!
Although I know a fair amount about CableCARD tuners (I'm the person...
Hello, I Have internet only now, and plug the coax into 2 analog cards. Spectrum is going all digital in a few weeks, what is the...
ffmpeg is used to create thumbnails. Thumbnail creation happens only once, so... yes you will see high CPU usage while TV service creates thumbnails for your whole recording library... but after that it should settle down.
ffmpeg is used to create thumbnails. Thumbnail creation happens only once, so... yes you will see high CPU usage while TV service...
Hi,
I always stream livetv and recordings to my nas. This was never a problem until the upgrade to Win10 of the server.
Since...
We cool !!
It will be a couple of days, but I will get back to you
Thanks
We cool !!
It will be a couple of days, but I will get back to you
Thanks
Any idea how to fix sound dropping out 2 or 3 secs. every 7 mins. when using a HDMI cable.
Drivers are up to date, changed cables...
That is my intention - that's why I asked if anyone had problems with the latest version :)
That is my intention - that's why I asked if anyone had problems with the latest version :)
I've noticed that an old bug seems to have reappeared having updated to 1.16 from 1.15. Seeking through recordings from a...
Fully agree with that ;)
Thererfore the translations I added during the time MP grew, I always used German terms according to the standards ISO 17100 and DIN EN ISO 9001 (the international and German standards for Technical Documentation) ;)
So in German "shares view" is in fact "Ordner-Struktur" or "Ordner-Ansicht". ;)
Fully agree with that ;)
Thererfore the translations I added during the time MP grew, I always used German terms according to the...
Recently I have been tidying up the TV recordings that I keep in a folder tree in the "Videos" section of MP, and I noticed...
Logs attached. When recording the log did both start TV and then stop it so Mediaportal minimised and then started and stopped a video which caused same behaviour before exiting.
Logs attached. When recording the log did both start TV and then stop it so Mediaportal minimised and then started and stopped a...
Hi all,
Not sure if this is correct section to post in.
Installed MePo 1.17 and also decided to give MAdVR a go. Everything works...
Rofl :) i was thinking about another fix lol :)
Rofl :) i was thinking about another fix lol :)
Found a bug which was sorted el pronto by the Development Group (regeszter): top work.
Don't use the EPG to stop current recording...
I don't think so, I just took a look and I only have content in A-Z and Live. Live works but I also get "No URL" if I try anything from the A-Z,:( I believe this is a relatively recent problem as it worked last time I tried a few days ago (viewed videos from the "Sport" catagory). I have seen similar in the past. and sometimes it...
I don't think so, I just took a look and I only have content in A-Z and Live. Live works but I also get "No URL" if I try anything...
Still trying to get Online Videos working correctly (...only BBC iPlayer consistently works for me)
Is there a setup from scratch...
Fixed. :)
@Developers , @Administrative
Someone deleted the imdb_de_ofdb_MP13x.csscript from our server but did not remove it from MovieInfoGrabber_V16.xml (that is the index file).
Fixed. :)
@Developers , @Administrative
Someone deleted the imdb_de_ofdb_MP13x.csscript from our server but did not remove it...
Hi all,
No logs yet but I can provide if necessary. From within the Mediaportal Configuration application, clicking the "Update...
Hello CyberSimian,
thanks for the good explanation! Didn't know that hibernate reacts different than sleep . The idea was that in the way we use the system it makes more sense to send the system to hibernate, because usally it isn't used for a while.
But no problem to change this to sleep (an power shedular handles hibernate).
Thanks!
Hello CyberSimian,
thanks for the good explanation! Didn't know that hibernate reacts different than sleep . The idea was that in...
Hello,
yesterday night and today (for testing) I had a Problem: I power down the System to hibernate via IRSS. While recording as...
Hi Henric-a
Could you post a screenshot of the dynamic refreshrate settings ?
and what is your screen capable of showing in Hz ?
Did you manually try all hz settings from withing windows? [right-click on desktop > display properties > ... ]
Regards,
Hi Henric-a
Could you post a screenshot of the dynamic refreshrate settings ?
and what is your screen capable of showing in Hz ...
Hi everyone,
since a couple of month i have the problem, that while playing TV shows the playback stutters. Not the audio but the...
Thank you, I've just wrote to Trakt support to have a feedback just copying your last post.
Thank you, I've just wrote to Trakt support to have a feedback just copying your last post.
Hi all,
in these days I'm watching "The Mist" but it does not sync wih Trakt and it's the first time it happens since when I use...
That would be news to me.
Some examples (full MediaInfo output) would be helpful.
Not as far as I'm aware.
Generally we improve the existing thumbnailer if/when people notify us about problems with it. So, if you have a problem with it, please tell us more so that it can be improved. ;)
You can make your own thumbnails if you want...
That would be news to me.
Some examples (full MediaInfo output) would be helpful.
Not as far as I'm aware.
Generally we improve...
Hi Guys, some questions:
I use MP 1.16 to view videos by "share". Having some thumbnails of the videos in the shares would be...
Make sure you have correctly configured your input device (MP Config -> remotes and Input Devices)
Activate setting in MP Config -> GUI -> Show special mouse controls
Some skins do not fully support a mouse, e.g. Titan - try DefaultWideHD instead ;)
Make sure you have correctly configured your input device (MP Config -> remotes and Input Devices)
Activate setting in MP Config ->...
I'm trying to use MP1 to replace WMC on a laptop that is now running Win10. I can't figure this application out. Even with...
Thanks, it's not necessary now as the list now loads quickly now that the MediaInfo metadata has been cached. The problem only arises the first time and not every time. I can live with that!
Thanks, it's not necessary now as the list now loads quickly now that the MediaInfo metadata has been cached. The problem only...
I just installed MP 1.17 and upon navigating to My Videos on a UNC drive, nothing is shown. Furthermore, MP 1.17 is in a state...
I'd like to help, but for now I can only repeat:
Please provide log files!
I'd like to help, but for now I can only repeat:
Please provide log files!
Hello Community!
I've Problems on certain channels (Pixelation/Artifacts): VOX HD, RTL2 HD, SuperRTL HD. Other Channels (e.g. DMAX...
Nice find! I'd bumped that up a long time ago (2013?) to try to work around the other seeking issue, before it was properly fixed. I've changed it back to 0 and seeking to the end in an active recording works as expected now. I assume there's no benefit in having it increased any more?
Thanks a lot for your help :)
*edit* For the...
Nice find! I'd bumped that up a long time ago (2013?) to try to work around the other seeking issue, before it was properly fixed...
When seeking forward to the live point (scroll bar says END) in an active recording, playback stops and returns to the menu. This...
It is the same fix, but it was too late for inclusion in 1.17, so it will go into 1.18.
It is the same fix, but it was too late for inclusion in 1.17, so it will go into 1.18.
When trying to playback recorded TV, I often get an error message: ''unable to play'' with some (seemingly random) numerical code...
Sorry for the delay replying owlsroost, I personally didn't find any improvement - I ended up applying the recommended MPAR settings that were highlighted in this thread and putting the 1.15 MPAR OCX file back in place and all seems OK now for me.
Sorry for the delay replying owlsroost, I personally didn't find any improvement - I ended up applying the recommended MPAR...
Afternoon,
Just upgraded our MediaPortal installations from 1.15 to 1.16 now that @Brownard has kindly built the Custom Data...