Older releases (26 Viewers)
- Locked
So, ich habe heute mal einen UPNP Tester drüberlaufen lassen.
Also irgendwie wird der MP2 UPNP Renderer immer mal kurz rausgeworfen.
Hier mal ein Bild
https://www.dropbox.com/s/jvel3ap733khqkq/UPNP-TEST.jpg?dl=0
Vielleicht hilft das etwas weiter.
So, ich habe heute mal einen UPNP Tester drüberlaufen lassen.
Also irgendwie wird der MP2 UPNP Renderer immer mal kurz...
Hallo, ich habe dieses schon im deutschen Bereich gefragt und noch keine Antworten bekommen. Daher frage ich hier noch einmal.
ich...
I've seen this issue before and it should be fixed in all recent Weekly builds. Please try this: https://forum.team-mediaportal.com/threads/mediaportal-2-weekly-snapshot-2016-02-07.133630/
I've seen this issue before and it should be fixed in all recent Weekly builds. Please try this...
Directly after start Live-TV the MP-Client crsh to Desktop without the following Windows message:
The Client-log shows anything...
BOOM, spot on brother.
FWIW, the web installer of directx9 says it completed, but actually doesn't.. the full DX9 redistributor does actually install.
Once that installed, the regular installer (and the weekly) seemed to work.
Thanks for the help!
BOOM, spot on brother.
FWIW, the web installer of directx9 says it completed, but actually doesn't.. the full DX9 redistributor...
I'm on windows 7. I've tried to install over VNC and RDP but keeps dying.. Any ideas?
[2628:281C][2016-02-14T22:09:35]i001: Burn...
No it wasn't gone in Nov 2015 here.
It's no big deal as it sounds fine in both instances.
No it wasn't gone in Nov 2015 here.
It's no big deal as it sounds fine in both instances.
This one is weird. I'm using Logitech 5+1 speakers and the Realtek on the MB.
No issues in moving the MP window about but if I...
Hi Spazmodious,
you can reset MP2 to the state right after install (actually even a bit before that...) the following way:
I assume you have MP2-Server and MP2-Client installed on the same Computer ("Single-Seat").
On that computer, exit the MP2-Client and stop the MP2-Server service (e.g. by opening a command prompt and entering 'net...
Hi Spazmodious,
you can reset MP2 to the state right after install (actually even a bit before that...) the following way:
I assume...
So I've discovered Media Portal 2 tends to crack the sads if the TV is turned off while the media portal client is running. First...
Thanks, I'll give that a go. So far even disabling the add on hasn't had any effect, seems to have lost control of the system
Thanks, I'll give that a go. So far even disabling the add on hasn't had any effect, seems to have lost control of the system
I was using Media Portal and installed the Power Scheduler add on. Was pretty happy with it until Media Portal stopped playing well...
So wie es aussieht konnte ich das Problem nun lösen.
Man glaubt es kaum aber schuld war ein defektes Flachbandkabel welches die Verbindung von CI-Modul zur TV-Karte herstellt.
Da ich schon so verzweifelt war, habe ich mit der Hardware rum gespielt und fest gestellt dass "Das Erste", "ZDF" etc. funktioniert wenn das CI-Modul keinem...
So wie es aussieht konnte ich das Problem nun lösen.
Man glaubt es kaum aber schuld war ein defektes Flachbandkabel welches die...
Hallo zusammen,
da meine Englisch kenntnisse etwas eingerostet sind schreibe ich den Thread auf Deutsch. Da das sonst zu lange...
I have the following hardware in my media box.
ASUS M5A78L-M/USB3 AM3+ AMD 760G + SB710 USB 3.0 HDMI uATX AMD Motherboard
LG Electronics 14x SATA Blu-ray Internal Rewriter without Software, Black Model WH14NS40 - OEM
AMD FX-6300 Vishera 6-Core 3.5 GHz (4.1 GHz Turbo) Socket AM3+ 95W FD6300WMHKBOX Desktop Processor
CORSAIR...
I have the following hardware in my media box.
ASUS M5A78L-M/USB3 AM3+ AMD 760G + SB710 USB 3.0 HDMI uATX AMD Motherboard
LG...
I have the following hardware in my media box.
ASUS M5A78L-M/USB3 AM3+ AMD 760G + SB710 USB 3.0 HDMI uATX AMD Motherboard
LG...
@disaster123 is everything else working as you expect? :)
@disaster123 is everything else working as you expect? :)
Is there a guide how to build a "custom" full installer including the tve3? I've some custom modifications to the tvserver in mp1...
So, after modify :
max_connection to 1000
Set .Host file with
127.0.0.1 localhos
::1 localhost
MP2-server crash always, i'm back on MP1-TVE3.
On MP1. i can have few error during xmltv import " Get_lock" message . but at least don't crash anymore.
So, after modify :
max_connection to 1000
Set .Host file with
127.0.0.1 localhos
::1 localhost
MP2-server crash always, i'm back...
Hello,
since few days, i can't have all my EPG displayed.
on XML import, the MP2-Server + TVE crash with this message ...
I Think there is a Problem with SlimTV Service 3.5. I go back to 3.0
I Think there is a Problem with SlimTV Service 3.5. I go back to 3.0
I get this error : Error invoking action "Get Channel"
MP1
MP2
[confirm]
TV channel changing up/down with MCE remote is buggy in MP2 Snapshot 2016-01-01 and MP 1.13.0
DE
I don't think that this is the cause, as it affects only MCE "previous" and "next" buttons, while "channel up/down" is mapped to "page up/down".
But anyway, it's good that it is working now
I don't think that this is the cause, as it affects only MCE "previous" and "next" buttons, while "channel up/down" is mapped to...
Hi,
I have a server/client install and a sepparate client install with MP2 Weekly Snapshot 2016-01-01. Also I have a MP 1.13.0...
@morpheus_xx
the screenshot of MP after i
use "Arial Unicode MS" with font file "ARIALUNI.TTF".
thanks
morpheus_xx and vasilich again.
@morpheus_xx
the screenshot of MP after i
use "Arial Unicode MS" with font file "ARIALUNI.TTF".
thanks
morpheus_xx and vasilich...
when i open MediaPortal2,it couldn't show chinese in the skin,but can show english,how can i do?all the chinese in the skin...
After posting this I remembered my tablet is 32bit. The installer ran fine, so I think the change is safe.
After posting this I remembered my tablet is 32bit. The installer ran fine, so I think the change is safe.
I had the same issue on Windows 7 64 bit. After checking the requirements with this link...
According to your log: when installation is being prepared, the contents are extracted to local folder:
[452C:2240][2015-10-04T22:38:33]i000: Caching bundle from: 'C:\Users\Oliver\AppData\Local\Temp\{362a6a98-386b-41e8-8355-bcb3b34ac7ff}\.be\MP2-Setup.exe' to: 'C:\ProgramData\Package...
According to your log: when installation is being prepared, the contents are extracted to local folder...
Hi,
there's still an error occuring while trying to install MP2 Summer 2015 Update 1 or the latest Snapshot on my WIN10 64-bit...
+1 to me. any solution?
+1 to me. any solution?
MediaPortal 2 Summer '15 Update 1
Hardware: Beebox
Hi,
unfortunately refresh rate changer doesn't work here. Logs are attached...
Hello,
I*m running on Windows 10 64-bit, TV Card TBS 6299SE, MP2 Summer 15 Release
Scanning of channels worked fine, but I cannot do a preview within the config tool. I startet MP2 itself, but I'm not able to watch TV.
I made some test and figure out, that starting timeshift from within the config tool creates a timeshift file...
Hello,
I*m running on Windows 10 64-bit, TV Card TBS 6299SE, MP2 Summer 15 Release
Scanning of channels worked fine, but I cannot...
Hello,
I*m running on Windows 10 64-bit, TV Card TBS 6299SE, MP2 Summer 15 Release
Scanning of channels worked fine, but I cannot...
Yeh I restarted MP2 and changed it back to None, works fine now. It actually impaired playback of movies too when it was enabled.
Yeh I restarted MP2 and changed it back to None, works fine now. It actually impaired playback of movies too when it was enabled.
I tried changing the setting to Two Sample and MP2 completely froze, would not respond to anything. I am currently using a KB and...
Hello,
a Workaround for the issue is to switch back to fullscreen mode in MediaPortal.UI.SkinEngine.Settings.AppSettings.xml - config-file.
<Property Name="FullScreen">
<boolean>true</boolean>
</Property>
best regards
Golrath
Hello,
a Workaround for the issue is to switch back to fullscreen mode in MediaPortal.UI.SkinEngine.Settings.AppSettings.xml -...
Hello All,
I set MP2 to work in windowed mode and I set to start in maximized window. But when MP2 start it crash after while with...
Just now i installed on this PC MP1 and the scan of Chanels works!
Just now i installed on this PC MP1 and the scan of Chanels works!
Windows10, DiSEqC simple.
TV Card: TechnoTrend 3650 CI
After some minutes of scan of Astra there appears the message see...
No just trying to find out what went wrong yesterday.
No just trying to find out what went wrong yesterday.
Hi,
i can only watch TV for around 37 to 38 seconds.
I need to reproduce to collect logs. I missed collecting them.
Stefan
OK was able to fix it with this thread. Sadly the MP2 client does not show an error message:
https://forum.team-mediaportal.com/threads/mp2-client-tv-no-tv-provider-available-yet.133039/page-2
OK was able to fix it with this thread. Sadly the MP2 client does not show an error message...
Hi,
the MP2 Server is running fine now. TV is also configured and pressing timeshift at the server works fine.
At the client a...
Is there any news on this problem?
I still experience this on all my clients, when resuming from standby. Sometimes it takes very long until server connection is re-established...
Is there any news on this problem?
I still experience this on all my clients, when resuming from standby. Sometimes it takes very...
@MJGraf @FreakyJ @osre
There still seems to be issues with our used HttpServer and/or our CachedMultiSegmentHttpStream...
I can confirm that this works now :) Thanks for the fix morpheus :)
I can confirm that this works now :) Thanks for the fix morpheus :)
Just starting to test MP2, and many things work good now, and damn it is fast!
One problem I have is the placement of DVB...
Hi.
The unusual naming is most likely due to an entry in the hosts file (found in C:\Windows\System32\Drivers\etc) . A third party software has modified the hosts file so the first entry has to be something like
127.0.0.1 update.raxco.com
to redirect update requests to localhost...
To prevent this the first line in the hosts file...
Hi.
The unusual naming is most likely due to an entry in the hosts file (found in C:\Windows\System32\Drivers\etc) . A third party...
I just installed MP2 besides MP1 and selected Single Seat setup. The strange item I see is that the MP2 Server is on host...
Hi.
During skinning I recognised an error with the help texts. The help text for Mpeg4 Codec named H264 and x264. Also both are a derivative of MPeg4 those are AVC (to be precise MPEG-4/Part 10) codecs. The "typical Mpeg4 (=h263) Codecs are DivX and XVid... I've changed this in the German translation on Transiflex already, but I can...
Hi.
During skinning I recognised an error with the help texts. The help text for Mpeg4 Codec named H264 and x264. Also both are a...
Hi.
During skinning I recognised an error with the help texts. The help text for Mpeg4 Codec named H264 and x264. Also both are a...
In MP1 I always click the "All Grouped", but in the MP2setup it sadly dose not work.
Since it works now, how can I make a import/export backup?
@resa
Thank you again.
@morpheus_xx
I created the folder, but since MP2 didn't crash since then, it's empty. But it's there for next time.
In MP1 I always click the "All Grouped", but in the MP2setup it sadly dose not work.
Since it works now, how can I make a...
Good day to you.
I did a clean install of win10 some day ago and directly installed Mediaportal2, after setting up my cinergy s2...
It's skin independent.
The order is alphabetical...;)
But of course it would be much better, when "Connections" and "Server Settings" are bundled together and stay at the same place on top of the list as those are the most important settings that needs to be done before anything else.
It's skin independent.
The order is alphabetical...;)
But of course it would be much better, when "Connections" and "Server...
This is my first post in these forums so apologies if I've missed something.
I am trying to add Synology NAS Shares as media...
Yes, I think even having your internet browser open while recording may avoid the problem.
Sorry, I'm not able to give specific instructions to solve the problem. All I know is that it is most likely related to power saving.
Probably not.
Yes, I think even having your internet browser open while recording may avoid the problem.
Sorry, I'm not able to give specific...
I have problems with lost frames in recording, which i can see when I play the file. The strange thing I have seen every time is...
Hello All,
I have problém with sound. When I mute sound in win. Then I start MP2 going to TV and play some DVB-T channel. but when I cancel mute in Windows there is no sound. I can increase/decrease volum and I see bar for volume on screen but I can't hear sound.
Thanks
Hello All,
I have problém with sound. When I mute sound in win. Then I start MP2 going to TV and play some DVB-T channel. but when...
Hello All,
I have problém with sound. When I mute sound in win. Then I start MP2 going to TV and play some DVB-T channel. but when...