Post problems you have when using MediaPortal,
or pre installation questions in here.
Yes. You're absolutely right. I tried again with the new MP.exe, together with the changes to splashscreen.xml I mentioned above, and everything, but one screen, worked.
The exception was one TV I use where the bottom half of the text was being cropped. I changed the height tag in splashscreen.xml from 40 to 60 and all of my screens...
Yes. You're absolutely right. I tried again with the new MP.exe, together with the changes to splashscreen.xml I mentioned above...
I've upgraded from 1.15 to 1.16 and have experienced a change to the behaviour of the splash screen using the DefaultWideHD skin...
Ah ja ... That worked (setting scale to 100%) - I wonder when that hit me ... it started out of the blue when playing around with 4k videos. Anyway - as this pc is only for MP the scaling is only a minior issue when playing with the setup ...
THX
Ah ja ... That worked (setting scale to 100%) - I wonder when that hit me ... it started out of the blue when playing around with...
Strange thing. Sometime it is working just fine - but sometimes it will display like this:
When I switch to windowed mode the...
Reinstall All needed/installed (but not visible im MPI) plugins should fix this problem ...
Reinstall All needed/installed (but not visible im MPI) plugins should fix this problem ...
Hello folks,
I recently suffered from the Avast issue discussed at [solved] - tv tuner Stopped getting signal
Before realising...
That was the cause. Thank you!
That was the cause. Thank you!
Hi guys. I have an odd bug that I can't pin down.
I upgraded from MP 1.15 to 1.16. Then found that Online videos and wifi remote...
ISSUE IS NOW FIXED :) thanks for a clue to what was going on.
I went into the tv server setup and changed the streaming server settings from auto to the static ip I assigned and it all started working again .
Kids are happy - missus not as unhappy , the world is all good again :)
ISSUE IS NOW FIXED :) thanks for a clue to what was going on.
I went into the tv server setup and changed the streaming server...
I have been using mediaportal for a few years as a single seat install , about 8 months ago I setup a server with only mediaportal...
Let me put it this way: I don't think your problem has been caused by a previous installment of MediaPortal. Therefore I think uninstalling the database engine would be pointless. However what you choose to do is up to you.
Let me put it this way: I don't think your problem has been caused by a previous installment of MediaPortal. Therefore I think...
Hi
Mediaportal has been working but has had some problems with error messages that prevents it from starting at times. Sometimes...
My PC:
Mainboard: Asus
CPU: intel core i7-3770K
VGA: GTX960
Ram: 16G
SSD 250G for OS: Windows 10 pro 64bit
SoundGrahp IR receiver inside (imon Veris)
Logitech Harmony 1100 with wireless extender
Logitech harmony remote software installed
Imon Manager software installed
MediaPortal 1.16 final installed
And all buttons are working for...
My PC:
Mainboard: Asus
CPU: intel core i7-3770K
VGA: GTX960
Ram: 16G
SSD 250G for OS: Windows 10 pro 64bit
SoundGrahp IR receiver...
My PC:
Mainboard: Asus
CPU: intel core i7-3770K
VGA: GTX960
Ram: 16G
SSD 250G for OS: Windows 10 pro 64bit
SoundGrahp IR receiver...
You're very welcome, any time! :)
You're very welcome, any time! :)
Hi,
I have a problem with one of my TV Cards. If I set any of the tuners on that card (BlackGold BGT3600), set as priority, MP...
Please help me...
Please help me...
Hallo,
I'm using DVBLink to getting my tuner to work probably.
Because MediaPortal don't support my tuners.
Fore now I have been...
Hello
I'm sorry to report that the cause of the problem is not clear from the log files or screenshot. At least not to me.
Please can you set the MediaPortal log verbosity to debug, then attach new log files next time the problem happens.
Hello
I'm sorry to report that the cause of the problem is not clear from the log files or screenshot. At least not to me.
Please...
Hi, I've been using mediaportal for quite a while now and has been running smoothly, however I have an issue that is popping up...
Hello,
I think the streamedMP plugin users know the overlay feature, which permits to visualize the last three series or movies added to mediaportal.
So I noticed that the tv series images in overlay (but also in fanart, etc) is blocked always to first season, even if I have second season, third season, etc.
Is there a way to get a...
Hello,
I think the streamedMP plugin users know the overlay feature, which permits to visualize the last three series or movies...
Hello,
I think the streamedMP plugin users know the overlay feature, which permits to visualize the last three series or movies...
If you mean the Watchdog problem, I'm happy to say yes! :)
We have an issue in our tracking system and a fix ready to be included in the next MP release:
[MP1-4856] Watchdog crashes on failure to copy TV Server gentle.config - MediaPortal JIRA
GitHub - MediaPortal/MediaPortal-1 at...
If you mean the Watchdog problem, I'm happy to say yes! :)
We have an issue in our tracking system and a fix ready to be included...
Hi there,
to be prepared for the change to DVB-T2 I bought a Hauppauge QuadHD.
Now those HD channels do stutter.
Following facts...
Where else would WE get a response like that. (y)
Where else would WE get a response like that. (y)
Using MP for a decade+ now (written plugins and donated too - so not just leeching).
Upgraded to 1.6 today and the audio on my...
Just to add to this after some fiddling about (not the love thing that is!)...
I can select a single HD channel and the EPG will populate (the step-by-step linked to above seems to be specific about selecting an SD)
The EPG seems to sit there doing nothing for 4-6 minutes or so then BAM..it populates very quickly, going from 'no...
Just to add to this after some fiddling about (not the love thing that is!)...
I can select a single HD channel and the EPG will...
The above is a problem I had been having for some time with MP1.14. I was hoping that an upgrade to 1.16 would fix it but alas...
With MediaPortal. Sorry, if I caused confusion here. But maybe the change at LAV could be a hint for the KODI forum to come up with.
With MediaPortal. Sorry, if I caused confusion here. But maybe the change at LAV could be a hint for the KODI forum to come up with.
ive got problems with the new tv standard DVBT2 HEVC in Germany.
TV Shows with stereo 2.0 run smooth but tv shows with 5.1 Sound...
We kept delaying it to fix issues but it should be out on Monday hopefully.
Here is the way I do 3D with MP1:
Rip your BD3D with DvdFab, typically in FHD Side By Side for high quality playback on UHD TV.
If you need subtitles use MakeMKV to rip your BD again and remux both MKV with the MKVToolNix.
Use MP1 with Auto3D plug-in for...
We kept delaying it to fix issues but it should be out on Monday hopefully.
Here is the way I do 3D with MP1:
Rip your BD3D with...
Hi all,
I'm running mp1.15 on Windows 10. Can't find a way to play 3D blurays? I've installed MP3D but apparently it's not...
IMHO Titan the best skin in MP :)
--
WBR, ajs
IMHO Titan the best skin in MP :)
--
WBR, ajs
Hi, I have for ling time been using titan extended.
While running MePo there was a defect in my motherboard (heatsink came of the...
Hello Peter. Please can you provide log files. There are too many possible causes. We could speculate about what might be going on, but it's very likely we'd end up wasting your time and ours.
Hello Peter. Please can you provide log files. There are too many possible causes. We could speculate about what might be going on...
I have reinstalled MP1 on a new PC, and all seems OK except it crashes as soon as I want to start watching TV. Tuner card is fine...
Hi Lehmden
Thank you for your reply, maybe it's a UK thing
I will make an enquiry on the MP2 section to see if anyone has Prime working in the UK
Regards
TW
Hi Lehmden
Thank you for your reply, maybe it's a UK thing
I will make an enquiry on the MP2 section to see if anyone has Prime...
Just wondering if MP will ever have a solution for integrating Amazon Prime
Considering a smart TV but I would be totally happy...
Thank you so much for the quick reply. I will try this (rather large update) and report back. You guys rock. Thanks for everything.
Thank you so much for the quick reply. I will try this (rather large update) and report back. You guys rock. Thanks for everything.
Just recently, Mediaportal (latest build and 1.15) hangs and crashes. I do not use TV server, I have Moving Pictures installed. I...
Hi Penbrock
Yep, you're on the right track with SQLite. (y)
No, I don't think so.
The log file shows that the TVSeries database is corrupt:
[2017-04-01 23:00:36,488] [Log ] [29 ] [INFO ] - SQLiteClient: Closing database: TVSeriesDatabase4.db3
[2017-04-01 23:00:36,506] [Log ] [29 ] [INFO ] - SQLiteClient: Closing...
Hi Penbrock
Yep, you're on the right track with SQLite. (y)
No, I don't think so.
The log file shows that the TVSeries database...
MP has started crashing alot.
When I look at the (attached) log files I see a lot of sqlite errors.
Is it a problem from the size...
...but in any case, in my opinion updating/fixing the LAV codec installation should be your first priority. If you can get them working properly, MP should use them instead of whatever other dodgy codec it's currently falling back on, and avoiding the dodgy codec should avoid the crash.
...but in any case, in my opinion updating/fixing the LAV codec installation should be your first priority. If you can get them...
Hello,
Thank you Team for an excellent product. It truly is great to have my IPTV->Colossus running through my Win10 PC as a great...
Thanks MM, I installed that update and everything is back to Normal
Thanks MM, I installed that update and everything is back to Normal
Hello. I'm running Media Portal 1.15 on Windows 10, with several Hauppage Tuner cards, (2) HVR-1600 and HVR-2250 to tune OTA ATSC...
I managed to do it. But no files are created.
I managed to create a bd_debug.log on my laptop. But this file doesn´t correspond to my PC System.
Everything seems to get worse. Stuttering etc...
I am a little frustrated.
Never had these problems before.
Not one of my systems is working properly.
I managed to do it. But no files are created.
I managed to create a bd_debug.log on my laptop. But this file doesn´t correspond to...
Its is quite strange but i think it is realted to you problems.
I can´t play some m2ts files anymore, by using the index.bdmv. The...
That update did the job(y)(y)
Thanks!!
That update did the job(y)(y)
Thanks!!
lost connection to the TV-server, In MediaPortal Configuration TV/Radio I test for connection and it is good (connected)
I run...
I did say to restart the TV Server (ie. the tvservice Windows service installed for MediaPortal TV support) after rebooting the PRIME.
Here's a tip for avoiding hard reboots...
You needed to restart the TV Server service to solve the problem.
The existence of hybrid shutdown (AKA fast boot) means that "rebooting" by selecting...
I did say to restart the TV Server (ie. the tvservice Windows service installed for MediaPortal TV support) after rebooting the...
Over the past couple of days, my attempts to watch live TV have all resulted in an error message stating, "Unable to create graph."...
You can always ask Uncle Google!
I think R7 250 has UVD 3.1:
Unified Video Decoder - Wikipedia
...which means it doesn't support it either.
For AMD GPUs, UVD 5 is required.
You can always ask Uncle Google!
I think R7 250 has UVD 3.1:
Unified Video Decoder - Wikipedia
...which means it doesn't support...
Hi all,
To enable my gpu at full power processing for mp, is the settings seen in the screen shot attached all i have to do?
Been...
Hi, yes, that appears to be the issue.
ViewMode Switcher - MediaPortal 1 - MediaPortal Wiki
I don't recall enabling that plugin during my installed. However, disabling it got me back to what I wanted.
That plugin seems super useful, I'll have to experiment with it to see if I like how it works with my particular TV signal sources...
Hi, yes, that appears to be the issue.
ViewMode Switcher - MediaPortal 1 - MediaPortal Wiki
I don't recall enabling that plugin...
I've switched to using MediaPortal 1.16 pre from MediaPortal 2.1
Most things are working great, but I can't seem to set the...
Thx, I tried my very best but failed with this config. I wrote a thread in the fritzbox manager forum, perhaps my fritz box ist not compatible???
EPG was realy a wait for a long time topic...
Regards
ramu
Thx, I tried my very best but failed with this config. I wrote a thread in the fritzbox manager forum, perhaps my fritz box ist not...
Hello MP Team,
a week ago I updated to MP 16 Prerelease. Since than I'm not able to watch tv anymore. After restart of my...
Download KB4015438 here...
Microsoft Update Catalog
Download KB4015438 here...
Microsoft Update Catalog
MP 1.15.0 stopped working after Win10 update
Windows write :"Media Portal has stopped working"
Tried to fresh install MP 1.16.0 Pre...