General Support (41 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
Look Configuration Files section at Folder File Locations - MediaPortal 1 - MediaPortal Wiki
Look Configuration Files section at Folder File Locations - MediaPortal 1 - MediaPortal Wiki
I am having the most bizarre problem in the history of problems. Yesterday, I was using Mediaportal happily and with no problems...
Replies
2
Views
2K
Yes.
Yes.
Hi, I have a Yamaha RX-V681 with 5.1 speakers (Teufel LT2 MK2 5.1). Latest MediaPortal, latest LAV Filter, latest nVidia drivers...
Replies
97
Views
18K
Does this also happen with EVR (instead of madVR)? Can you provide a screenshot of your LAV audio decoder configuration? MP already does that. Refresh rate is updated as long as the material (title/chapter) length is at least 60 seconds. For shorter material (could be only a 5 second "logo") we don't think there's much point. Sorry...
Does this also happen with EVR (instead of madVR)? Can you provide a screenshot of your LAV audio decoder configuration? MP...
Today I finally managed to do some tests with 1.1Pre and BD-J and madVR (MadVR renderer will try it best after arranging the video...
Replies
29
Views
4K
I have never used this, but the Wiki shows a function called "GridLayout", which looks as though it might create a multi-row button grid. There are 15 occurrences of it in the "Titan" skin. This is the function description: GridLayout(columns, rows, horizontalSpacing, verticalSpacing, orientation) The "GridLayout" function is used...
I have never used this, but the Wiki shows a function called "GridLayout", which looks as though it might create a multi-row button...
MediaPortal 1.15 works great with an MCE remote control. It's pretty good too with a mouse and touch interface using PureVision...
Replies
6
Views
1K
MP1 MP2 RAMDisk DE
Ja, nur Timeshift in der RAM Disk. Ob das sinnvoll ist hängt von verschiedenen Faktoren ab. Ich würde die Lösung immer wieder nutzen. Da es quasi "nichts" kostet und schnell eingerichtet ist würde ich einen Test empfehlen.
Ja, nur Timeshift in der RAM Disk. Ob das sinnvoll ist hängt von verschiedenen Faktoren ab. Ich würde die Lösung immer wieder...
Hallo Zusammen, hat einer eine RAMDisk in MP erstellt (für Timeshift)? Ich habe schon sehr lange MP im Einsatz, jedoch noch nie...
Replies
4
Views
997
After managing to experiment, I opened a new thread: Pre 1.16: Problem with BD-J and external codec video :rolleyes: Thanks again to all
After managing to experiment, I opened a new thread: Pre 1.16: Problem with BD-J and external codec video :rolleyes: Thanks again...
He's trying in every way to be about two weeks, After installing the Pre 1.16, internal player does not play any type of files...
Replies
29
Views
5K
thanks that worked for a new install !
thanks that worked for a new install !
Hi. I'm looking for Firewall info for MP 1.15 / 1.16Pre under Windows 10 (I found a thread here for Win 7 and 8 but it does not...
Replies
8
Views
4K
Hi Assume you have 2 or more tuners? If so, in TVServer Config -> Recordings -> Folders. Set path for one tuner, then hit 'Same recording folder for all cards'. Ref Breese posting, Custom path & filenames is on same tab as folders - mine is defaulted to movies and standard settings and I have no issues, but either way, you should...
Hi Assume you have 2 or more tuners? If so, in TVServer Config -> Recordings -> Folders. Set path for one tuner, then hit 'Same...
Hi, I searched the forum and the wiki and am confused. I have been using mediaportal 1 for several years. Currently using...
Replies
2
Views
2K
I'm not sure if this is a Rockstar plugin issue or MP. Considering support on Rockstar seems to have ceased I feel the need to post in here. Basically Rockstar works with Spotify in everything but accessing your playlists. This crashes MP. It appears I'm not the only one either. Logs:
I'm not sure if this is a Rockstar plugin issue or MP. Considering support on Rockstar seems to have ceased I feel the need to post...
I'm not sure if this is a Rockstar plugin issue or MP. Considering support on Rockstar seems to have ceased I feel the need to post...
Replies
0
Views
664
Hi Clay The log file shows the most likely explanation is that some channels are not mapped (linked) to both tuners: [2017-01-15 22:31:46,602] [Log ] [38 ] [INFO ] - Controller: find card for channel KTXA-DT [2017-01-15 22:31:46,604] [Log ] [38 ] [INFO ] - Controller: got 1 tuning details for KTXA-DT [2017-01-15...
Hi Clay The log file shows the most likely explanation is that some channels are not mapped (linked) to both tuners: [2017-01-15...
Hello, Can someone please help me resolve this problem with the MediaPortal 1.14 TV-Server and my HDHomeRun tuners? I have...
Replies
1
Views
2K
So, after et all my shared folder to enable wakeonlan now shared folder on root plugins are always present, but i have always an issue when try to enter inside. the content folder is empty , and i need to return back and try once more ( it's an randomn result) this last step need to be done also for subfolder, about accesing to...
So, after et all my shared folder to enable wakeonlan now shared folder on root plugins are always present, but i have always an...
Since upgrading to MP 1.15 (from 1.12), I've had a problem with the folders in My Videos going missing. They are all network shares...
Replies
15
Views
3K
MP1 MP2 Feed news failed DE
Ok. This is what I want to hear, it means I'll wait for it.:)
Ok. This is what I want to hear, it means I'll wait for it.:)
By some days I noticed that in my home screen I have this message for RSS feed: "feed update failed. Control log files" Usually I...
Replies
2
Views
676
It's OK, but you may get more replies in the German language section of the forum (Es ist OK, aber Sie können mehr Antworten im deutschen Sprachabschnitt des Forums erhalten) - https://forum.team-mediaportal.com/categories/deutsches-mediaportal-forum.168/
It's OK, but you may get more replies in the German language section of the forum (Es ist OK, aber Sie können mehr Antworten im...
Hallo! Ich hoffe es ist ok in deutsch zu posten!? Zum Problem - MePo ruckelt im LifeTV. Nach einiger Zeit guter Performance...
Replies
1
Views
914
reminds me a bit on that ^^ pls @regeszter any switch or sth.else to hide them will do - my audience annoys me steady because of this. and happy new year to y'all
reminds me a bit on that ^^ pls @regeszter any switch or sth.else to hide them will do - my audience annoys me steady because of...
After upgrading to 1.16pre on both server and client the mini-EPG is suddenly displaying the start-time in fron of the program...
Replies
39
Views
5K
Just confirming this fix worked for me. Thanks MM1352000!
Just confirming this fix worked for me. Thanks MM1352000!
Hi, New to MediaPortal software, please be gentle. So, I have a HDHomerun dual running successfully. I've installed the...
Replies
5
Views
11K
As far as I know TVSeries plugin not supported NFO files. Why not ask about this in the Moving Pictures thread? I do not use Moving Pictures plug-in, so I do not know.
As far as I know TVSeries plugin not supported NFO files. Why not ask about this in the Moving Pictures thread? I do not use...
Can I import nfo fanart and poaster in Mp1 like MP2
Replies
7
Views
1K
BTW, it is confirmed that the problem arises due to the uninstall of Free Studio, and I am using 64-bit Win 7.
BTW, it is confirmed that the problem arises due to the uninstall of Free Studio, and I am using 64-bit Win 7.
I have been using MediaPortal 1.9.0 for over a year, everything is alright until 1 week ago, I uninstalled a software called...
Replies
7
Views
1K
I'm digging out these 4 years old thread, because i've had the same error. MediaPortal startup times were ok, but the first tune of a tv channel took around 1 minute. So i searched in the logs and found the same error message as PCSentianl. Also the same 20 seconds of doing nothing before the error message. Looks like my windows 10...
I'm digging out these 4 years old thread, because i've had the same error. MediaPortal startup times were ok, but the first tune of...
My client PC works fine, but takes around 2 minutes to startup even tough its an SSD, the following error always appears in the...
Replies
19
Views
4K
Interesting so this issue was introduced sometime between 1.9 and 1.15.
Interesting so this issue was introduced sometime between 1.9 and 1.15.
Hi Guys I have been using MP for 10 years and havnt really had many issues. I recently bought a UHD Samsung 65 inch TV and found...
Replies
6
Views
933
Sorry to hear that, hopefully it won't come to that. Do we have a list of tasks and features that need to be completed for TVE 3.5 to be delivered? What's clear to me is that the current situation is not sustainable. Ever since I joined that community 4 years ago TVE 3 has more or less been in code freeze because TVE 3.5 was being...
Sorry to hear that, hopefully it won't come to that. Do we have a list of tasks and features that need to be completed for TVE 3.5...
It's simply because only one dev is working on TVE3.5 and the status is, even if asked, not shared frequently. I saw a bunch of...
Replies
10
Views
4K
Now that I had a little time to tackle this, I followed @SpudR 's advice and cleaned my system from the Video-card driver with DDU in safe mode and installed the latest driver. Since then no crashes or weird behaviour(y). It seems like everything is back to normal. Thanks again for the support.
Now that I had a little time to tackle this, I followed @SpudR 's advice and cleaned my system from the Video-card driver with DDU...
Hi there, The last couple of days my MediaPortal is acting up. The usual statement: I didn't change anything :rolleyes: . I...
Replies
5
Views
4K
Hi Andrew Thanks for the log files (y) In case you're interested, crashes for any program - MediaPortal or otherwise - can be followed up by checking the Windows application event log. The most recent crashes I see (24 and 28 December) in that log seem to be caused by a plugin which uses the Torshify library: "28/12/2016...
Hi Andrew Thanks for the log files (y) In case you're interested, crashes for any program - MediaPortal or otherwise - can be...
This is on my brothers system. He has a TV connected via HDMI and a soundbar which wirelessly connects to the TV automatically...
Replies
1
Views
789
Hi @mm1352000 I finally got back to this. I removed all ",17" in each url and tried scanning again but unfortunately this does not make a difference. Its still creating duplicates. Have I misunderstood your directions? Regards Jacob UPDATE: nevermind. apparently i did not manage to save the file i edited before scanning :)
Hi @mm1352000 I finally got back to this. I removed all ",17" in each url and tried scanning again but unfortunately this does not...
Hello, Just got a Digital Devices Octopus NET rack network tuner. When scanning in mediaportal with the attached .m3u file it...
Replies
4
Views
3K
ok, works as designed then. If i disable that option and turn the tv off the audio remains on, but if i turn the tv back on the audio is stopped and i cannot a webstream again. Pressing ok button after turning off or on of the TV is the workaround. I think i will stick to that then. Thanks for the support.
ok, works as designed then. If i disable that option and turn the tv off the audio remains on, but if i turn the tv back on the...
When using TV Server for playback of radiostreams playback is stopped when you turn the TV off or on. TV is connected through HDMI...
Replies
2
Views
1K
The watchdog doesn't ever send us anything. It creates zip files for your convenience so that you can attach it to your post. If you don't attach it, we get nothing.
The watchdog doesn't ever send us anything. It creates zip files for your convenience so that you can attach it to your post. If...
Recently, I had occasion to update the firmware of my HD HomeRun PRIME to the most recent version. Also, Windows 10 automatically...
Replies
3
Views
2K
ty, now i can enjoy :)
ty, now i can enjoy :)
Hi. I made a fresh install .15 on a fresh Seven SP1. Sound works fine on windows and VLC. But no sound within MP, neither...
Replies
4
Views
1K
Well, no, not really. One is the program name and the other part is the argument. A space in-between is a must. Logs please. That's entirely up to you. Keep in mind though that 1.2.3 is really old, has lots of bugs and is no longer supported. If you have difficulties with navigation you may want to try a different skin. There are...
Well, no, not really. One is the program name and the other part is the argument. A space in-between is a must. Logs please...
Hi I installed MediaPortal and afterwards I realised I had to change my computer name as it was made the same name as my other...
Replies
14
Views
3K
https://forum.team-mediaportal.com/threads/tv-upgrade-combined-rtsp-hevc-video-and-live-tv-rate-matching-improvements.135000/
https://forum.team-mediaportal.com/threads/tv-upgrade-combined-rtsp-hevc-video-and-live-tv-rate-matching-improvements.135000/
Hi, why is it not possible to get this channel: Astra 19.2 E, 11.406 V, SR 22000, FEC 2/3, DVB-S2 – 8PSK ? Is it not possible...
Replies
52
Views
22K
In MP2 there is a Separate TV Setup configuration on the desktop. That is where you will find everything
In MP2 there is a Separate TV Setup configuration on the desktop. That is where you will find everything
Hi, When I record on certain (sky 1) I am getting audio description in the background and whatever I do I cannot get rid rid of it...
Replies
5
Views
2K
Hello Without log files we could only speculate that TV Server is blocked from accessing the stream by a firewall, or the stream provided by the camera is not an MPEG 2 transport stream, or there's some problem in TV Server's RTSP handling etc. etc. etc. There are many possibilities. A diagnosis and possibilities for resolution could...
Hello Without log files we could only speculate that TV Server is blocked from accessing the stream by a firewall, or the stream...
I am trying to add a "channel" to show my live feed from my IP Cam. I created an m3u file with the full URL. If I open it with VLC...
Replies
1
Views
1K
Top Bottom