Post problems you have when using MediaPortal,
or pre installation questions in here.
No this setting is disabled
I have disabled this as suggested. I doubt it will change anything but I will give it a go.
I was hoping that the supplied log files "might" pinpoint the issue?
No this setting is disabled
I have disabled this as suggested. I doubt it will change anything but I will give it a go.
I was...
I have had on intermittent occasions over various MP releases where I've suddenly lost the video stream to the TV. This normally...
I've been using MP1 since 2007 or 2008, I don't remember. Used in the family every day, 3 HTPCs.
At this point the MP1 is in near perfect condition. And we only have a couple of fixes for the new Pre release. There is single database support in development for many MP1s, but I haven't been able to test that yet. So some innovation is...
I've been using MP1 since 2007 or 2008, I don't remember. Used in the family every day, 3 HTPCs.
At this point the MP1 is in near...
It has been a long time since a new version of MP was released. There are almost no new themes, new plug-ins, new versions... it...
MP1
MP2
1.29.0
A few channels are missing in MediaPortal which are present in other liveTV-software
DE
:(. I have never used satellite TV, and I regret that I do not know what the problem might be.
TV Server scans only those frequencies that are defined in the tuning-parameters file for the satellite that you are scanning, so it is possible that the missing channels have moved to a new frequency that is not contained in the...
:(. I have never used satellite TV, and I regret that I do not know what the problem might be.
TV Server scans only those...
After many years of successful usage of MediaPortal, we were forced to upgrade the htpc (it's now more than 10 years old). I needed...
the best way is to use localhost or the name of the computer. 127.0.0.1 is good too.
the best way is to use localhost or the name of the computer. 127.0.0.1 is good too.
Hello team,
Setup: MP 1.28 single seat on Win 10 pro x64, using MySQL database, wired NIC to router.
The setup works fine until I...
Thanks @CyberSimian! I delved deeper into this issue and especially the "Silent Stream Bug" you mentioned. I downloaded different pieces of software that claimed to do like you said: keeping the DA-convertors "alive" by sending a non-audible signal periodically. Turned out this was NOT the thing happening in my AV-receiver.
While...
Thanks @CyberSimian! I delved deeper into this issue and especially the "Silent Stream Bug" you mentioned. I downloaded different...
I'm having a strange one here ... it seems to have started after getting a new Sony 4k TV, and manifests itself by refusing to...
Just come across this thread while trying to trace a similar problem.
MP1 set-up currently at v1.27 has no server/client connection problems, both server PC and client PC run power scheduler in plug and play mode, client PC set to not sleep unless on home screen, server set to sleep after 15 mins inactivity under native windows 10...
Just come across this thread while trying to trace a similar problem.
MP1 set-up currently at v1.27 has no server/client...
Hi,
I have the issue that my Server goes into suspend during watching a recorded video. Because it doesn't detect the MP Client...
Update: With the "PowerScheduler forces system to go to standby when idle" option Windows goes to Standby mode even while EPG scan is running. (y)
However, since I'm not only using my PC for MediaPortal, I'd like to leave Windows handling the power modes - respecting MediaPortal actions like watching TV or recording.
I'd really...
Update: With the "PowerScheduler forces system to go to standby when idle" option Windows goes to Standby mode even while EPG scan...
Although this post is very old, the problem still or again is existing. As long as EPG runs, Windows Standby mode is prevented...
Indeed. A big challenge. I had hoped it was a generic VFD in the iMON and that I could find a driver for just the display only. Alternatively if I could find the source code for the iMON driver and strip out the bits that don't apply to the VFD and re-compile it.
It's all a bit beyond my ancient skills (I learnt to code Z80 machine...
Indeed. A big challenge. I had hoped it was a generic VFD in the iMON and that I could find a driver for just the display only...
Evening all,
I am stuck. MP is throwing an exception at startup which has me baffled.
Logs attached. Many thanks in anticipation...
MP1
MP2
1.29.0
IPTV does not consistently connect. Mediaportal client times out before Tv Server establishes timeshifting?
DE
Thanks for your feedback!
Thanks for your feedback!
I'm not sure exactly when this started, I've been dealing with it for a while until I had time to troubleshoot it. I'm pretty sure...
Hi there,
the rotation of the video depends on the renderer.
I used EVR, joecrow MadVR. I installed MadVR and was able to see joecrow's results.
The video 1080x1920.mp4 is played correctly, the video 1920x1080-mux.mp4 is not. It is rotated but the resolution is not correct.
I've attached 6 screenshots, 3 with EVR and 3 with MadVR...
Hi there,
the rotation of the video depends on the renderer.
I used EVR, joecrow MadVR. I installed MadVR and was able to see...
Hello,
I noticed that videos 1080 * 1920 px are often played incorrectly in Mediaportal-Videos.
I have attached 3 videos, which are...
I tried to read the logs : investigation seemed to show the fanart database as having trouble...so I have deleted that database ......it has allowed me to watch mptv and some movies for 45 minutes without a crash......
I tried to read the logs : investigation seemed to show the fanart database as having trouble...so I have deleted that database...
Hi I posted recently because my Mediaportal 1 setup was crashing when I played long music playlists but now the problem has become...
Pleased to say that I have solved this, and believe it or not, it was a fault with the recording pin control on the xml which had the knock on effect with the highlight, which only goes to show the sensitivity of the EPG xml. If nothing else you confirmed what I thought and where I needed to look and thanks to your input, it is now...
Pleased to say that I have solved this, and believe it or not, it was a fault with the recording pin control on the xml which had...
Evening all,
I am having a little bit of bother skinning the EPG. The specific issue is the border highlight. It shows on all the...
I completely uninstalled MP1 and installed MP2. Audio is now good. I'm relieved, and I suppose a little glad to have been forced to make the switch, because I'm already liking MP2 more. But still, the original problem remains a frustrating mystery.
I completely uninstalled MP1 and installed MP2. Audio is now good. I'm relieved, and I suppose a little glad to have been forced...
I am running 1.29 Pre-release on Windows 10 Pro. I use MP only to watch TV through my Hauppauge tuner card. I am suddenly getting...
Better MediaPortal 1.29 Pre-Release - MEDIAPORTAL
Better MediaPortal 1.29 Pre-Release - MEDIAPORTAL
MePo 1.27 will not import Clickfinder. And by do it manually the TV Server configuration section will crash.
The Clickfinder...
Many people found the Lentoid decoder better optimised than LAV for software decoding.
If you want to try it, download it from the link below, run reg.bat as an admin to install it and change the HEVC Video settings in MediaPortal Configuration/Codecs and Renderer...
Many people found the Lentoid decoder better optimised than LAV for software decoding.
If you want to try it, download it from the...
For some unknown reason I can't play HEVC encoded video with MP1 on my system. I have tried every trick I know, but nothing works...
Aren't there any developers of test group people here that know something about radio streams??
Or is my problem posted in the wrong place?
Aren't there any developers of test group people here that know something about radio streams??
Or is my problem posted in the...
I have two local radio streams defined, both of which have played reliably for years. Suddenly one of them won't play with the...
In gathering logs for my radio stream problem, I noticed that I had hundreds of ts_reader and ts_writer files - apparently a new one every time MP starts (which is every day at 5am).
This has the look of some long forgotten debug effort. Any clue how to stop this as this point (other than command file delete before startup)?
No...
In gathering logs for my radio stream problem, I noticed that I had hundreds of ts_reader and ts_writer files - apparently a new...
In gathering logs for my radio stream problem, I noticed that I had hundreds of ts_reader and ts_writer files - apparently a new...
The Microsoft Antimalware Service Executable got updated on July 9 (version 4.18.2106.6-0) and it seems to me that this update fixed the issue with MediaPortal. The CPU load of the antimalware service is near 0% even if the MediaPortal application is running.
The Microsoft Antimalware Service Executable got updated on July 9 (version 4.18.2106.6-0) and it seems to me that this update...
I've been using MP1 on a dedicated HTPC for some years now, but recently I'm struggling the software to work. Whenever MP1 runs...
Just about done!
Most things are reinstated. A few issues with my Fanart, but I think that may be waiting for the scraper in FanartHandler to pick them up again from the old thumbs. Time will tell.
I have moved all of my files on to a larger HDD and reduced the number that I had from two to one, so if it was a power supply issue...
Just about done!
Most things are reinstated. A few issues with my Fanart, but I think that may be waiting for the scraper in...
Over the past few days MP has become a bit unstable and I have noted an error when exiting MP Configuration. The logs don't give...
Hello to all,
as requested by doskabouter I created the log and before posting it, I went through and one line caught my attention, apparently my music database had a problem. So I deleted (rename) and recreated the database, as I have a lot of tracks in my collection (+/- 90000 songs) I hate do do this because it's very longer but...
Hello to all,
as requested by doskabouter I created the log and before posting it, I went through and one line caught my attention...
Hello to all
I have been using MP for many years and my system had become +/- unstable, it was time to refresh it.
So I...
Well, or somehow find it in the Media Portal, and then with your eyes in the folder ...
-- Tapatalk | WBR, ajs
Well, or somehow find it in the Media Portal, and then with your eyes in the folder ...
-- Tapatalk | WBR, ajs
Hello,
who knows how to determine the folder thumb file name e. g. 1712997069L.jpg to a particular folder?
Apparently a hash is...
Could be that a sudden powercut corrupts the database, or give all your pcs a new ipadres, or several more things that can break up a running mediaportal setup.
Without the logs however, I don't have a clue on what exactly is wrong...
Could be that a sudden powercut corrupts the database, or give all your pcs a new ipadres, or several more things that can break up...
Hi there,
I'm a happy long time user and am currently using MP 1.25.
Up until now I had no issues with my setup.
Yesterday...
Hi @joecrow,
Thank you, I did uninstall MYSQL, LAV and deleted the respective folders in ProgramData, then re-installed MP1.27 and hurrah I've set up the TV side of things and live TV and recordings are working.
Thank you and @joEhSuper for your help, I really do appreciate it, now I just need to set up all the plugins again :-)
Hi @joecrow,
Thank you, I did uninstall MYSQL, LAV and deleted the respective folders in ProgramData, then re-installed MP1.27...
After a short break away from Mediaportal, I installed MP1.27 and have the TV Server on a different computer to the client.
I...
Ops. I disabled the Skin Translations plugin. That's all it was. :ROFLMAO:
Ops. I disabled the Skin Translations plugin. That's all it was. :ROFLMAO:
So I was stripping away some unused plugins from Mediaportal. Not sure exactly what change caused it exactly, but now instead of...
Hi doskabouter
I only use the line jump for the description. I modify the XmlTV file from EPG-Buddy with WebGrabPlus (rex) only in the description with \n. My new description is:
Genre, year of production \n Original description \n Actors
Hi doskabouter
I only use the line jump for the description. I modify the XmlTV file from EPG-Buddy with WebGrabPlus (rex) only...
Just installed 1.28, and the new XML EPG importer refuses to import the xml spit out by EPG-Buddy. Older versions of MP1 ingest it...
Greetings....
I've been trying to set up mp2 server. I am able to scan for channels but I can't preview them it's saying no signal. On both red and green channels. There r 3 cards installed so over all I have 6 tuners. All of them r scanning but none playing. I'll be back in 9 hours.
Greetings....
I've been trying to set up mp2 server. I am able to scan for channels but I can't preview them it's saying no signal...
Greetings....
I've been trying to set up mp2 server. I am able to scan for channels but I can't preview them it's saying no signal...
Hello again ...
The HTPC, so the Power Scheduler, will wake up not to the correct time. So, if 20:15 is the beginning of the TV Recording, he has to record 8 Minutes pre and to wake up 7 minutes pre to do this. But je wake up at 20:15 and start to record after the installed 8 minutes ... . So the first 8 Minutes are lost! The times...
Hello again ...
The HTPC, so the Power Scheduler, will wake up not to the correct time. So, if 20:15 is the beginning of the TV...
I've set it like my other HTPC:
But it will not go to sleep in Homescreen. What is wrong?
With "START"...
P.S. - Strangely, the TV Server my single seat setup (1.27 on a modest machine running Windows 10 Pro x64) is working from my office machine MP client. Same exact network, firewall, Defender settings. It's a slightly older version of Win 10 though - I haven't updated to 20Hx on it yet. Maybe I shouldn't (or maybe I should image it...
P.S. - Strangely, the TV Server my single seat setup (1.27 on a modest machine running Windows 10 Pro x64) is working from my...
Let me start by asking if anyone has TV Server running PROPERLY on a Windows 10 machine, and if so are you using RTSP or UNC share...
I still don't know how to expose the problem I have with the audio reproduction. It seems not to appear in the bug reports. I will keep trying to find a solution. Thanks for the time.
I still don't know how to expose the problem I have with the audio reproduction. It seems not to appear in the bug reports. I will...
I don't know if this is a system, software or plugin issue. I've been trying to catch it for some time, at least the last 2...
When using the internal Blu-ray Player the subtitles appear too early. No matter if I play the movie/series using the menu or picking the stream from the MP menu.
When the internal Blu-ray Player is off, the subtitles appear correctly.
Has anyone a suggestion how to fix that?
Thanks in advance.
Gesendet von meinem BlackBerry KEYone...
When using the internal Blu-ray Player the subtitles appear too early. No matter if I play the movie/series using the menu or...
When using the internal Blu-ray Player the subtitles appear too early. No matter if I play the movie/series using the menu or...