My fix for nothing showing in Recordings(but files there)
Hi Folks, I had the same problem (and ear bashing for this too...!) and looking at the MySQl database 'Recording' (NOT Recordings) table found that I had a spurious entry from a previous recording.
The entry pointed to the C: drive - but I have moved my recordings to D...
My fix for nothing showing in Recordings(but files there)
Hi Folks, I had the same problem (and ear bashing for this too...!) and...
TV-Server Version: 1.0 RC1
MediaPortal Version: 1.0 RC1
MediaPortal Skin: MonoChrome
Windows Version: Server: Vista Business /...
You may try disabling all the other devices on that interrupt. The IRQ usage highly depends on BIOS and mainboard, and since ACPI I do not know any way to manually change the assingments. I have found an interesting article: Interrupts-und-IRQs-FAQ and c't 18/2000, S. 188: Hotline
It works stable here with my script, although I am...
You may try disabling all the other devices on that interrupt. The IRQ usage highly depends on BIOS and mainboard, and since ACPI I...
TV-Server Version: 1.0_RC1_Refesh + svn19127
MediaPortal Version: 1.0_RC1_Refesh + svn19127
MediaPortal Skin: Blue Two
Windows...
Skystar2 S3 problem with RC2
Hello Rudi99 and all others,
I just upgraded to MP/TVServer 1.0, RC2 and it works better than any version before for
me. Unfortunately there is the same problem with the SkyStar 2 PCI (no HD) card like
you described.
Just after resuming from S3 standby the error initially described by Rudi99...
Skystar2 S3 problem with RC2
Hello Rudi99 and all others,
I just upgraded to MP/TVServer 1.0, RC2 and it works better than any...
My two "skystars" are now recognized by WinXP and MP. (driver etc see MySystem on the left side)
After reboot or first start i can...
i close this thread now, because its going from technical to personal.
as we clearly state in the wiki, we do not support certain OperatingSystems, simply because Microsoft does not support them in the way we would need it.
means that the do not release required patches.
if it works, good then you are lucky.
if not, than we can not...
i close this thread now, because its going from technical to personal.
as we clearly state in the wiki, we do not support certain...
TV-Server Version: 1.0 RC1
MediaPortal Version: 1.0 RC1
MediaPortal Skin: MonoChrome
Windows Version: Server: Vista Business /...
The issue could be fixed.
An uninstall of the broken installation is needed. Then download the RC1 again please. It will be named MediaPortal_Setup_1.0_RC1_Refesh.exe
Sorry for the inconveniance!
The issue could be fixed.
An uninstall of the broken installation is needed. Then download the RC1 again please. It will be named...
EDIT: first RC1 build was broken - please download a fresh build. ETA: 16:45 UTC
New file is located here: SourceForge.net...
You also have to note, that M$ has now dropped this format from its OS because of its limitations, especially now HD has become more available from broadcasters, so it is a case of looking to the future, not the past :)
You also have to note, that M$ has now dropped this format from its OS because of its limitations, especially now HD has become...
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: Blue
Windows Version: XPSP2
CPU Type: Intel Duo Core 2,66Ghz...
Hi seco,
I have configured a ramdisk for timeshift buffer recently, but since I have various problems right now, I can't check if it solves the problem. I'm even not on latest release of MP...
CU,
Sepp.
Hi seco,
I have configured a ramdisk for timeshift buffer recently, but since I have various problems right now, I can't check if...
Hi,
I think this threads should be in this forum...
Solved!
This issue has been solved in the following post:
https://forum.team-mediaportal.com/development-91/please-test-those-who-having-trouble-dvb-scannig-41252/#post277441
Check it out for an updated tswriter.ax! :)
Best Regards
Solved!
This issue has been solved in the following post...
Hi,
There have been lots of information about that, but seems like many "new" users have missed it along the road ;)
I'll add a note so we can add more on howto install in SVN thread(next or next after that)
Regards
Roy
Hi,
There have been lots of information about that, but seems like many "new" users have missed it along the road ;)
I'll add a...
TV-Server Version: RC 1 stable and SVN 18951
MediaPortal Version: same
MediaPortal Skin: Indigo
Windows Version: XP SP2
CPU...
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: Xface
Windows Version: Vista Ultimate 32 bit incl RC1 servicepack I
CPU Type: Athlon 64 X2 4800
HDD: WD 500 and Samsung 750
Memory: 2 Gig
Motherboard: Asus M2N SLI deluxe
Video Card: ATI club 3d HX 2600XT
Video Card Driver: Latest
Sound Card: PCI XFI Ultimate...
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: Xface
Windows Version: Vista Ultimate 32 bit incl RC1...
infinityloop - you are saying either the audio stream from the tuner card getting corrupted or the TV-server's stream?
To rule out the tuner card, would a IRTrans remote volume change go to the tuner card? I didn't think it would touch the tuner card at all so I'm thinking it would be more likely the streamed data from the TV-server.
infinityloop - you are saying either the audio stream from the tuner card getting corrupted or the TV-server's stream?
To rule out...
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: Widescreen
Windows Version: WinXP SP2 w/ latest updates
CPU Type...
Ok, these are my logs.
I waited for the first SVN because noticed that there were some corrections from developers.
In fact, radio starts properly now, bt all the other problems remain.
Very slow starting of analog radio, sometimes (very often) channel changing doesn't work between different cards, recording doesn't work.
Anyway...
Ok, these are my logs.
I waited for the first SVN because noticed that there were some corrections from developers.
In fact...
TV-Server Version: 1.0.0.0 RC1
MediaPortal Version: 1.0.0.0 RC1
MediaPortal Skin: Blue Two 0.2.3.0
Windows Version: Windows XP...
note that I get the bug if the option "restart service" in powerscheduler is ticked ....... okay I don't know if this option is of some use to me for now but it seems to me still a bug (in powerscheduler maybe, in the way it restarts the tvservice ?)
note that I get the bug if the option "restart service" in powerscheduler is ticked ....... okay I don't know if this option is of...
This is an old bug but i have been serching for a resolution for NETWORK clients hanging/failing RTSP when the server returns from...
WinTV GO: TVServer configuration finds no channels
Hi,
I ran into a similar problem using a WinTV GO2, and hope you have some advice for me.
MediaPortal 0.2.2 worked (so, so), but RC1 TV Server won't find any TV channels. The drivers I found on the Hauppauge website were older than those I got on the CD...
WinTV GO: TVServer configuration finds no channels
Hi,
I ran into a similar problem using a WinTV GO2, and hope you have some...
TV-Server Version: 1.0 RC1
MediaPortal Version: 1.0 RC1
MediaPortal Skin: standard
Windows Version: XP Pro SP2
1. TV Card: PVR150...
Lately I have been seeing multiple different use cases when TVE3 triggers a standby when the media playback is ongoing (DVD, tv recording, last.fm radio). Previously I haved had time to get the logs, but now the error.log had the same NULL exception.
based on the logs the shutdown happened few minutes after a scheduled recording...
Lately I have been seeing multiple different use cases when TVE3 triggers a standby when the media playback is ongoing (DVD, tv...
There's seems to be some kind of synchronization problem in TV-Server PowerScheduler when entering to standby...
Hello,
I might have similar problem but i don't have any rating status in XML.
When i import manualy - TVserver CMLTV plugin says - OK.
After a while i can;t see anything i TV neither in XMLTV plugin !
TV server: 4 Jul 08 SVN.
Part of LOG file:
2008-07-14 22:39:59.718750 [XmlTvImporter]: plugin:xmltv importing...
Hello,
I might have similar problem but i don't have any rating status in XML.
When i import manualy - TVserver CMLTV plugin...
Hello,
I installed today The TVServer from MediaPortal_Setup_1.0_RC1_Refesh.exe from scratch and
wanted to import a...
i didnt had the time to read throught the whole thread now, because caos @ work.
if we have a confirmed bug here, could someone please give me (one more time) a step by step description please? :)
i didnt had the time to read throught the whole thread now, because caos @ work.
if we have a confirmed bug here, could someone...
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: default
Windows Version: XP SP2
CPU Type: AMD Athlon 1600+ XP...
I saw this mistake, I think that it is connected with that that at the first start of scanning the server swore on not initialized card and has not wanted to scan, at repeated attempt all has passed well...
It is necessary to try still? Or to wait the new version?
I saw this mistake, I think that it is connected with that that at the first start of scanning the server swore on not initialized...
TV-Server Version: 1.0 RC1
MediaPortal Version: 1.0 RC1
MediaPortal Skin: BlueTwo
Windows Version: Windows XP SP2 + All HotFix...
Hi,
I have experinced the same problem (using one of latest SVN - 4 Jul 08 i guess).... Luckily found this and I don't have to start new thread. You said it's fixed. Where ? Latest SVN which - one ?
Thanks.
Hi,
I have experinced the same problem (using one of latest SVN - 4 Jul 08 i guess).... Luckily found this and I don't have to...
TV-Server Version: TV3 + SVN
MediaPortal Version: 0.2.3.0 final + SVN
MediaPortal Skin: Project Mayhem III
Windows Version: XP Home...