untested 'Nightly Builds' of TV-Server (2 Viewers)
Download and discuss TV-Servers 'Nightly Builds'
- Locked
- Sticky
If you think that you have found a Bug, then please start a detailed bugreport -->here<--
:thx:
If you think that you have found a Bug, then please start a detailed bugreport -->here<--
:thx:
If you think that you have found a Bug, then please start a detailed bugreport -->here<--
:thx:
Hi,
clicking the above link says "You are not allowed to view this page." ??? any solution???
Hi,
clicking the above link says "You are not allowed to view this page." ??? any solution???
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
in addition:
this build.. keeps on recording to the default tvserver location and not to the location I have set in the configuration
I kept it running 24/7 since first install and is stable..
However.. my C drive is limited.. and with timeshift files and recording it would be game over sooner or later ;)
in addition:
this build.. keeps on recording to the default tvserver location and not to the location I have set in the...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
I played around with it a little bit more and it seems that the actual channel switch is really just very delayed.
I played around with it a little bit more and it seems that the actual channel switch is really just very delayed.
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
I have NA channels, but HD only with the 82 canada...do you want to know something else that I can help you?
Thanks!
Saticoyo
I'm sorry, my previous message was for STOKED!!
Saticoyo
I have NA channels, but HD only with the 82 canada...do you want to know something else that I can help you?
Thanks!
Saticoyo...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
hi,
I found solution for my problem, I had in recording setting- recording folders, same folder set in recordings & timeshift, and that caused error.
Br, Janne
hi,
I found solution for my problem, I had in recording setting- recording folders, same folder set in recordings & timeshift...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Hi,
To all of you that wonder about "Your System does need MP's requirement!"!
Thats a detection to see if a fix which can cause issues it's not installed on your system, it doesn't work as it should yet, but it will very soon! So until then you can calm down ;)
Regards
Roy
Hi,
To all of you that wonder about "Your System does need MP's requirement!"!
Thats a detection to see if a fix which can...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
my epg for bev is working fine i grab it from NBC-E but for some strange reason the data shows up 2 times when im in MP i see the info about the show 2 times. i don't know if its MP yet need to test it with default skin to see if the skin is doing that.
my epg for bev is working fine i grab it from NBC-E but for some strange reason the data shows up 2 times when im in MP i see the...
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
Faulty scheduling conflict
I have three tuners installed:
- Pinnacle PCTV Dual DVBT Pro Tuner 1 (priority 4, Channels SVT1, SVT2, TV4 mapped)
- Pinnacle PCTV Dual DVBT Pro Tuner 2 (priority 3, Channels SVT1, SVT2, TV4 mapped)
- TwinhanDTV Ter-CI (priority 2, (Channels SVT1, SVT2, TV3, TV4 mapped)
When doing manually recordings...
Faulty scheduling conflict
I have three tuners installed:
- Pinnacle PCTV Dual DVBT Pro Tuner 1 (priority 4, Channels SVT1, SVT2...
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
Hi i would like to add another wote for function which could allow us to select one of two mono languages which can be transmited in one stereo channel. Possibility to choose it when scheduling record would be awsome.
Possibility of switching those audio channels (L/R) to mono would be beutifful.
Here in Czech are some old...
Hi i would like to add another wote for function which could allow us to select one of two mono languages which can be transmited...
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
I have the same problem.
I have the tswriter.ax exchanged against the "revision 18062.
After the error was fixed.
I have the same problem.
I have the tswriter.ax exchanged against the "revision 18062.
After the error was fixed.
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
I've random crashes of tv-server again with this build. While watching TV suddenly the tv-server service just stops. This happens with every build last week. Crashes are random, can't see any pattern in this. Logs are attached.
I've random crashes of tv-server again with this build. While watching TV suddenly the tv-server service just stops. This happens...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Have you try diabling EPG while timeshifting?? I had the same problem and I thing that I was fixed removing EPG timeshipting...
Iosu
Have you try diabling EPG while timeshifting?? I had the same problem and I thing that I was fixed removing EPG timeshipting...
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
this "retry loop" should only wait if the slot state is "unknown". all other steps (cam inserted, cam ok) are not affected.
meanwhile I have removed this loop, but returning false as result. by this the upper components should retry by themselves.
I'll post a new tvlibrary and tswriter this evening to test it...
this "retry loop" should only wait if the slot state is "unknown". all other steps (cam inserted, cam ok) are not affected...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
TVE3 doesen't grab EPG with options "...while idle" and "...while timeshifting".
No errors no logs.
TVE3 doesen't grab EPG with options "...while idle" and "...while timeshifting".
No errors no logs.
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
After testing build 17368 and 17378 with the issue of HD not working except the audio, I've tried some older builds but without much luck with scheduled recording or playback stutter. So I tried this one. I have no problem with recording in .TS (haven't tested yet MPG) and scheduled recording and also finally HD is back (i'm in NA)...
After testing build 17368 and 17378 with the issue of HD not working except the audio, I've tried some older builds but without...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Hello all,
I have the same "No signal scan" issue.
I face also another strange behavour, it seems that i can't save settings for "power scheduler" plugin. I can modify values, then i click ok and next time i open TV-server configuration settings are the default ones. Is there anybody else who have that problem ?
Regards...
Hello all,
I have the same "No signal scan" issue.
I face also another strange behavour, it seems that i can't save settings...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
If your MP is installed correctly, the setup detects the path out of the registry. If it doesn't found it, you are not able to install the plugin. It's unchecked and disabled then.
So no need to ask the user for the directory.
regards
chefkoch
If your MP is installed correctly, the setup detects the path out of the registry. If it doesn't found it, you are not able to...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
thx alot for this awesome link! i found the avi and vmr fix for german versions!
thx alot for this awesome link! i found the avi and vmr fix for german versions!
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Tv Doesn't work after MP Idle for some time
Hi,
Snapshot runs perfectly after a reboot. If TV is then turned OFF in MP and MP is idle for about 10 min, TV doesn't work anymore. Mp freezes, and only killing the process helps. One time i got an error log, that database connection can't be established. When restarting TV-Service...
Tv Doesn't work after MP Idle for some time
Hi,
Snapshot runs perfectly after a reboot. If TV is then turned OFF in MP and MP...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
lol @ that quote from tomfrogger "just give me five minutes to fix this then we can watch telly" - I too find myself always saying this to my gf. :ooops:
Quick question for the SVN-updated. If I too want to jump on the SVN bandwagen and do frequent SVN updates, do i simply have to download the new SVN update, and run the exe, or...
lol @ that quote from tomfrogger "just give me five minutes to fix this then we can watch telly" - I too find myself always saying...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
please wait for the next public build. builds > 16265 should contain the correct fix. otherwise please report again. note that you will need to update _both_, MP AND TVServer to a build >16265 for the fix to work.
edit: after reading your logfiles, i'm not sure if you are having the same issue that has been fixed. please report...
please wait for the next public build. builds > 16265 should contain the correct fix. otherwise please report again. note that you...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
I've had same issue with FireDTV first and Technorotrend C1500 as secondary. TT creates 0kb recordings if FireDTV tunes and records another mux first. What makes it weird, is that I can timeshift TT but recordings fail. And now recording and timeshifting are supposed to use the same routines.
While timeshifting woks, I did had...
I've had same issue with FireDTV first and Technorotrend C1500 as secondary. TT creates 0kb recordings if FireDTV tunes and records...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
hongkong dmb-th is work!
great software ,only the chinese epg and channel name can not show
i upload the ts to ftp,epg.zip is from other software may can help
hongkong dmb-th is work!
great software ,only the chinese epg and channel name can not show
i upload the ts to ftp,epg.zip is...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Hi,
Just skip that message until next build occurs, it was a false report ;)
Regards
Roy
Hi,
Just skip that message until next build occurs, it was a false report ;)
Regards
Roy
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Client problems
Cane some one help me? I have a multi seat system. My TV works on the server but not on the client. all firewalls are disable.:S Here are the log files.
I have also tested with VLC, but i only get black screen.
Client problems
Cane some one help me? I have a multi seat system. My TV works on the server but not on the client. all firewalls...
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
Don't worry. You nevertheless pointed out a bug.. In case some other grabbers will fail there won't be database errors anymore ;)
Don't worry. You nevertheless pointed out a bug.. In case some other grabbers will fail there won't be database errors anymore ;)
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Exactly.
I was guilty of venting my frustration about the way I saw the project going. I've been using MediaPortal for long enough now to realise that it does most of what I want it to do. Sure, I'm one of the lucky ones who has a setup that TV server works well on. However, if I didn't, I'd just have to stick with TV engine 2...
Exactly.
I was guilty of venting my frustration about the way I saw the project going. I've been using MediaPortal for long...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Thanks!!
Thanks!!
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Same here with hauppauge pvr500.
Ruud
Same here with hauppauge pvr500.
Ruud
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...