No, because the exception/error does not include/provide that detail to us. I only knew that it was a file access problem because I've seen it before.
The file contains technical information related to the tuner. It's only saved when the tuner is loaded (ie. once per tuner after the TV service starts), not every time you start...
No, because the exception/error does not include/provide that detail to us. I only knew that it was a file access problem because...
Hello
I'd like to run TVServer with an account without administrator priviledges because I don't want to give a program which...
maybe not related but I had a problem with Outlook 2013 sending after the update.
This was fixed using
sfc /scannow
in a command window run as administrator
maybe not related but I had a problem with Outlook 2013 sending after the update.
This was fixed using
sfc /scannow
in a...
Have a weird problem after I decided to do a clean install of MediaPortal on my just updated windows 10 box.
I can install...
This is what I was thinking of. If you're confident that's not happening, rule it out.
I'd say that's impossible unless there was a serious Windows or hardware bug. MP and S@H are 100% independent.
Hmmmm nice to take the optimistic view. :)
Honestly, if it were me in your position, I'd still try testing your system's CPU and memory...
This is what I was thinking of. If you're confident that's not happening, rule it out.
I'd say that's impossible unless there was...
MediaPortal Version: 1.14.0
Description
In MP 1.15.0, which is not in the drop down list... I have tried removing unwanted...
Big thanx for that!
Clue:
With Buffer 0,19 I've a few moments of whitenoise at the beginning of all my DTS-Wavs (5.1).
0,40 works much better for me.
Perhaps: Averyone has to find his own best.
Big thanx for that!
Clue:
With Buffer 0,19 I've a few moments of whitenoise at the beginning of all my DTS-Wavs (5.1).
0,40 works...
MP 1.10.0
@hwahrmann
Hi!
With MP 1.10.0 i've noticed some playback issues. Steps to reproduce ->
1. Configure MP for music...
First a disclaimer: I'm based in NZ and don't have first-hand experience with Aussie TV.
From what I've heard, the EIT data suffers from all of the problems you've described, but the MHEG 5 data is better. EPG Collector supports grabbing both formats. It also supports enhancing the data with episode information via TVDB lookup.
You...
First a disclaimer: I'm based in NZ and don't have first-hand experience with Aussie TV.
From what I've heard, the EIT data suffers...
MediaPortal Version: 1.13.0
Description
If you have an EPG supplied by Xmltv data (possibly other data sources but haven't...
Need someone to work on it :P so surely in the future but not eta.
You can always use the internal option uncheck, it will use 4K bluray with LAV Splitter :)
Need someone to work on it :P so surely in the future but not eta.
You can always use the internal option uncheck, it will use 4K...
MediaPortal Version: 1.18.0
Description
do not start 4k blu-ray disks with a codec hevc, error unable to play : index video...
Ahhh, I have a WinTV CI myself and I recall that happening to me too. I thought I had just done something wrong, but now I guess the CI driver installer is a bit weird/buggy.
Yeah, thanks for reporting your solution. Very happy to hear that the problem is resolved. :)
Ahhh, I have a WinTV CI myself and I recall that happening to me too. I thought I had just done something wrong, but now I guess...
Hi,
I made a fresh install of win7 and MP 1.10.0 and everything works fine except that the WinTV-CI tab dissappeard and...
Thanks for reporting back. I'm always happy to hear positive results. :)
I don't know, but quite possibly. In theory trying to tune to the same channel over and over (or even tuning to different channels lots of times) as the EPG grabber was doing shouldn't cause a BSOD with a good driver. I think of the EPG grabber as...
Thanks for reporting back. I'm always happy to hear positive results. :)
I don't know, but quite possibly. In theory trying to...
Hi,
I have been using MediaPortal since at least December 2012 and am full of admiration for it and the developers and supporters...
Just to close off this thread...
Solution for no EPG data described here:
Norwegain (Canal Digital) DVB-S EPG stopped working
Language code "NOR" being unavailable for selection in MP and/or TV Server Configuration is system-specific. The list of language codes comes from Windows/.NET cultures. With a little code, it's possible to...
Just to close off this thread...
Solution for no EPG data described here:
Norwegain (Canal Digital) DVB-S EPG stopped working...
now and then , I need the edit the mediaportal.xml to make Norwegian audio default for DVB-S - because the GUI does not allow me to...
So weird! I enabled "Use MediaInfo BDs" and blu ray playback was successful again. As I don't like to enable this option, I subsequently disabled it and blu ray playback continued to work as normal! It was the same effect on all 3 computers. In my book, this is still a bug but at least there is a workaround.
So weird! I enabled "Use MediaInfo BDs" and blu ray playback was successful again. As I don't like to enable this option, I...
Blu Ray playback appears to be broken in Mediaportal 1.15. On all 3 of my computers, I receive the error "Unable to play: index"...
This sounds like the bug that has already been fixed in MP 1.18.
Note that the single episode in the list is not also included in the folder, so when the single episode is deleted by mistake, there is no corresponding deletion of the item in the folder (because it does not exist in the folder).
Try MP 1.18 and see if it fixes your...
This sounds like the bug that has already been fixed in MP 1.18.
Note that the single episode in the list is not also included in...
MediaPortal Version: 1.17.0
Description
I'm reporting a long term bug where if a TV station specifies the title of an episode with...
Hi,
i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no informations on the last channel, i do the live-tv-modul on and off, after this i can programm in the epg. Til today there is no solution. Go on my other 2 threads of this problem...
Hi,
i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no...
Hello Com,
i have noticed an issue. I was aware of was in MP 1.9 but now are not resolved. I have wrote it down here.
Melmak have...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think.
I did try to record without avtive front-end and without power-saving options active: same result as before. But since it is only to change the senning to never stop the frontend, I can lile with it. Could be...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think.
I did...
MediaPortal Version: 1.10.0
Description
After some testing I realized that the recordings became useless whenever the frontend...
Hi,
Yep this error time on time and related to registering font, so not a big deal but sometimes after a reboot it works, for now no one was able to fix it properly :(
Hi,
Yep this error time on time and related to registering font, so not a big deal but sometimes after a reboot it works, for now...
MediaPortal Version: 1.16.0
Description
This happened on a multiseat setup on clients as well as on the server.
Started with 1.16...
Thanks for the update. :)
This doesn't sound like a good long term solution.
I'm 99% sure the problem is/was outside MP, but either way, there's nothing I can do without more information.
I suggest to make a backup then try to update to v1703 again.
Thanks for the update. :)
This doesn't sound like a good long term solution.
I'm 99% sure the problem is/was outside MP, but...
MediaPortal Version: 1.16.0
Description
Hello,
could you please help me with very annoying problem, which occured to me few days...
Regeszter: My server has no client running on it (i.e. dedicated and 'headless'), thus the problem with having _lastUserTime updated to prevent entering standby prematurely.
Dev Group: Please consider the following patch for TvEngine3\TVLibrary\Plugins\PowerScheduler\PowerScheduler.cs in Mediaportal 1 Main branch.
NOTES:
1) I didn't...
Regeszter: My server has no client running on it (i.e. dedicated and 'headless'), thus the problem with having _lastUserTime...
MediaPortal Version: 1.14.0
Description
Dear Dev,
I have a machine with TVServer installed and use the PowerScheduler to shutdown...
I further add that access to particular parts of the CAM menu (eg. entitlements, supported CA system IDs) may be affected by the CAM usage at the time. In other words, if the CAM is busy decrypting channels, it may not be possible to access certain details. That would be a limitation imposed by the CAM and/or DD driver MTD design. As...
I further add that access to particular parts of the CAM menu (eg. entitlements, supported CA system IDs) may be affected by the...
MediaPortal Version: 1.16.0 pre-release
Description
When I open the CI entitlement menu I get nothing, I can only see the full...
Hello guy's
i think found an solution for solve my issue of short timing for an 100% server use.
it's the : "System unattended sleep timeout" setting
Power Options - Add "System unattended sleep timeout" - Windows 7 Help Forums...
Hello guy's
i think found an solution for solve my issue of short timing for an 100% server use.
it's the : "System unattended...
Hello guy's, i have myself an issue with PowerScheduler.
i explain my situation
MultiSeat with dedicated TVserver ( nothing else...