I've upgraded to 1.2A now, so I've run the test. I left everything on default (2 virtual users, tune delay 1000). I can't get a lot of channels due to a rubbish aerial, and in 1.1.2 I'd get a lot of TVservice stops when tuning into weak signals and I didn't get any of that running this test, so it looks like some improvements have...
I've upgraded to 1.2A now, so I've run the test. I left everything on default (2 virtual users, tune delay 1000). I can't get a lot...
Have you ever wondered about just how stable your setup is when it comes to tuning channels, then this addition might just be for...
How about one setting that controls the scan division and another setting that controls the size of the jumps?
Scan division sizes: 0.05, 0.1, 0.2 MHz
Jump sizes: None, 0.05, 0.1, 0.2, 0.3, 0.4 MHz
That would be perfect
Bye,
sdf
How about one setting that controls the scan division and another setting that controls the size of the jumps?
Scan division...
when scanning analog radio, if MP finds a station, the scanning jumps 0.4 Mhz.
In Italy there are several stations between 0.10...
Hey there..
I Just got me a Hauppauge wintv-ci but cant get it to work, i have tried all that is postet here. MP actually tells me that the channels are scrambled. I have made some logs, hope you are able to help me. I thanks in advance ;)
Hey there..
I Just got me a Hauppauge wintv-ci but cant get it to work, i have tried all that is postet here. MP actually tells me...
Tried to do a clean install of 1.2.0 Alpha yesterday, and all went well until i tried to watch scrabled DVB-T channels.
I...
i only set zho(chinese) ,use the patch in 1.1.2 is all chinese epg ,1.1.3 is half chinese epg ~
1.2.1 not have use patch.1.2.1 can not use SetupTv.exe --DebugOptions dupe the ts source to upload for test..
i open a new thread here
https://forum.team-mediaportal.com/bugreports-74/mediaportal-1-2-1-epg-setup-error-101261/#post796667
i only set zho(chinese) ,use the patch in 1.1.2 is all chinese epg ,1.1.3 is half chinese epg ~
1.2.1 not have use patch.1.2.1 can...
HI
One of my todays schedule recording did not start (is on red on the guide) but is not recording
I have check tv.log and I...
Hello MM.
I'm using latest driver package, version 5.7. Don't know why they shows up as version 5.0. Have always used 5.7. I'm also using latest FirmWare.
I have to leave home for the next seven days today, for work. Can do some more testing when I return back home next Tuesday.
A
Hello MM.
I'm using latest driver package, version 5.7. Don't know why they shows up as version 5.0. Have always used 5.7. I'm...
I can't scan any DVB-S2 channels with my DigitalEverywhere FloppyDTV S2 card. This problem occurred after I made a fresh install...
Bump mm1352000.
Don't know how the development is going on and if the switch to git is near.
But what about including your latest speed improvements in analog radio?
Thank you!
sdf
Bump mm1352000.
Don't know how the development is going on and if the switch to git is near.
But what about including your latest...
MediaPortal Version: svn 27432
New problems in analog radio in latest svn (at least from 272xx).
Now when changing channels...
even if it causes trouble in your config it does not necessary mean its a bad feature.
i also had trouble with bsod's in the past, but i appreciate gibman's work and the lower
tuning delays.
even if it causes trouble in your config it does not necessary mean its a bad feature.
i also had trouble with bsod's in the past...
Hello,
starting i use MP 1.2.0.0 i get few time per day a bluescreen.
(in this message i can read something about "ks.sys")...
Working fine here with version 1.1.5.27210 and windows 7 sp1 32 bit Singleseat and also works fine on a client which is running windows 7 sp1 64 bit
Rich
Working fine here with version 1.1.5.27210 and windows 7 sp1 32 bit Singleseat and also works fine on a client which is running...
Hi,
Does anyone have a minute or two to check whether the following bug (confirmed in current SVN) is present in 1.2.0alpha...
The fixes that Andy submitted recently (viewport-issue and addition of masking in thumbnails and filmstrip) have cured the issue for me. So...this should be fixed whenever 1.2.0 Beta is released. Or in recent SVN versions.
The fixes that Andy submitted recently (viewport-issue and addition of masking in thumbnails and filmstrip) have cured the issue...
Hi
Running SVN 26565 in both Windows 7 and XP shows coverflow with covers upside down in Blue3Wide. Maybe you already know this...
I finally found one codec which could handle this with dxva enabled, Powerdvd 11 (saf 6.0).
So I don't know if this must be changed, maybe good as debug option.
I finally found one codec which could handle this with dxva enabled, Powerdvd 11 (saf 6.0).
So I don't know if this must be...
MediaPortal Version: 1.2 svn
MediaPortal Skin: maya
Windows Version: vista 32 bit
CPU Type: atom 330
HDD: seagate 1.5 TB...
Hi there,
I'm sure this has been covered in this thread (about the less than ideal way coverflow draws the screen - my simple terminolgy), but under normal usage of my HTPC coverflow seems ok for my collection of music (not that many albums - I used shares view), but when I connect to my HTPC via RDP (for admin/testing purposes) it...
Hi there,
I'm sure this has been covered in this thread (about the less than ideal way coverflow draws the screen - my simple...
MediaPortal Version: 1.2 alpha svn
MediaPortal Skin: Black Glass
Windows Version: WinXP SP3
CPU Type: AMD X2 3,8 GHz
HDD: WD 300 GB...
I don't have any of those files, so I cannot test.
Even if there are no errors in the logs, they are still useful as they tell us what MP is trying to do, and tell us what IS working.
Mark
I don't have any of those files, so I cannot test.
Even if there are no errors in the logs, they are still useful as they tell...
MediaPortal Version: MP 1.2.0
MediaPortal Skin: Blue3 Wide
Windows Version: W7x64 (fully patched)
CPU Type: AMD Phenom II X3...
This patch enhances GetUniqueTopLevelFolders by simplifying the logic and returning only the minimum number of directories to be watched.
edit - minor change to remove relative paths
This patch enhances GetUniqueTopLevelFolders by simplifying the logic and returning only the minimum number of directories to be...
Since some weeks I noticed a very annoying behaviour if I play videos from a network share. After some minutes the videoplay just...
AW: dshowhelper for EVR renderer Windows 7 x64 + Nvidia broken in SVN 26907
oh that could be a long time... it must be something really big. Sad to hear that we have to wait so long :-)
Devs get ready for 1.2 final :-) but as even the 1.2 beta is moved to february... 1.2 is next xmas 2011 ?
AW: dshowhelper for EVR renderer Windows 7 x64 + Nvidia broken in SVN 26907
oh that could be a long time... it must be something...
Hi!
System: Windows 7 Ultimate x64, Nvidia GT 330M graphics, 4 GB ram, etc.
Earlier today I discussed an issue in IRC with...
Hi @ll,
Currently MP 1.1.2 is running with DD driver 2.0.0.23 and morpheus_xx patch. It works mostly without problems.
But I'm thinking about switching to MP 1.2.0 Alpha.
Is anybody using this config already? My first tries posted earlier were not that successful.
Will MP 1.2.0 Alpha work?
Hi @ll,
Currently MP 1.1.2 is running with DD driver 2.0.0.23 and morpheus_xx patch. It works mostly without problems.
But I'm...
Hi,
I'm testing the 1.2.0 A after reading the new support of Digital Devices.
It seems that it doesn't work at all. If I...
AW: Re: TV Randomly loses HTPC signal
True. He should have checked this from the very beginning. At that time I thought that he had just badly set his MP options...
AW: Re: TV Randomly loses HTPC signal
True. He should have checked this from the very beginning. At that time I thought that he...
I have recently started using Mediaportal 1.2 and I have managed to get it up and running they way I like it. However, there is one...
Hi sofakng
That "error" seems to be common to a number of tuners. I say "error" because I believe that it actually means that the tuner is already tuned. There is a trial fix for this in MP 1.2.0b. If there are no problems with the fix (which there haven't been so far) then it should be included in 1.2.0rc +.
Regarding NIT...
Hi sofakng
That "error" seems to be common to a number of tuners. I say "error" because I believe that it actually means that...
MediaPortal Version: 1.1.6 r27742
Windows Version: Windows 7 x86
1. TV Card: Genpix Skywalker-2
1. TV Card Type: DVB-S
1. TV...
Hi there
The "fix" won't go into SVN because it is simply a workaround and confirmed where the problem was for me. There is an internal team discussion going on at the moment about how we're going to solve the problem properly as it is relatively serious and requires careful consideration. I guess you both compile your own builds...
Hi there
The "fix" won't go into SVN because it is simply a workaround and confirmed where the problem was for me. There is an...
MediaPortal Version: MP 1.2.0 SVN 27119
MediaPortal Skin: Blue 3 Wide
Windows Version: Windows 7 Ultimat 64
CPU Type: AMD Athlon...
Re: MP 1.2 Beta SVN single channel epg does not show correct program detail informati
Patch committed to SVN.
EDIT: Also moved this thread to 1.2 section.
Re: MP 1.2 Beta SVN single channel epg does not show correct program detail informati
Patch committed to SVN.
EDIT: Also moved...
Hi,
in the actual SVN you don't get the correct program detail information in the single channel EPG, when you're at the bottom...
i can verify this problem also exists in MP 1.1.1, the sound mixer sometimes sets MP to zero volume after wake up from suspend and also during a MP session.
very annoying as it strongly affects the waf factor...
i can verify this problem also exists in MP 1.1.1, the sound mixer sometimes sets MP to zero volume after wake up from suspend and...
MediaPortal Version: 1.1.3 Alphe
MediaPortal Skin: Blue3 Wide
Windows Version: Win 7 RC 32bit
CPU Type: Intel Core Duo E8200...