Post problems you have when using MediaPortal,
or pre installation questions in here.
I am also fiddling with ffdshow.
kevon27, as you are an expert on this, maybe you could share some of your experience here.
Ideas:
1. I am using Plasma TV with 1024x768, connected via HDMI, so it would be great to upscale and sharpen via ffdshow.
2. I want to keep CPU load low because of heat/noise (using Athlon 64...
I am also fiddling with ffdshow.
kevon27, as you are an expert on this, maybe you could share some of your experience here...
Anyone know how to upscale DVDs using ffdshow, i'm keen to try and upscale my dvds to 720p, just curious if anyone does this...
Do i run these after registering the filters, or does these register the codecs? supports Win7 x64 and works with "every" version of PDVD Codecs?
Do i run these after registering the filters, or does these register the codecs? supports Win7 x64 and works with "every" version...
I bought PowerDVD 8 and would like to know if it is possible to "extract" some Codecs from PowerDVD.
I don't need the whole...
I've moved the fix on to the 'request merge' stage in Jira, as it's probably had all the testing it's going to get from this thread, so it should go into 1.21 pre-release.
I've moved the fix on to the 'request merge' stage in Jira, as it's probably had all the testing it's going to get from this...
I've downloaded and installed MP 1.19, everything seemed to be fairly nice... I scanned the frequencies I wanted: DVB-T (514MHz)...
Hi,
It's not on the list as far as i can see but similar ones are listed there.
It should be a hardware encoding one.
esra.
Hi,
It's not on the list as far as i can see but similar ones are listed there.
It should be a hardware encoding one.
esra.
Hi guys,
I've read through the sticky and tried to find newer drivers for my card to test it but can't get the link on this page...
Update: With the "PowerScheduler forces system to go to standby when idle" option Windows goes to Standby mode even while EPG scan is running. (y)
However, since I'm not only using my PC for MediaPortal, I'd like to leave Windows handling the power modes - respecting MediaPortal actions like watching TV or recording.
I'd really...
Update: With the "PowerScheduler forces system to go to standby when idle" option Windows goes to Standby mode even while EPG scan...
Although this post is very old, the problem still or again is existing. As long as EPG runs, Windows Standby mode is prevented...
It's bad method to write myself xml-part for my tuner! Freeware, freeware))
It's bad method to write myself xml-part for my tuner! Freeware, freeware))
I have problem with my card A16AR, this card don't work with media portal (i have latest software version). Please help me. I read...
Thanks for all the advice. It seems that upgrading my tuner card will be the most promising sollution. As I am quite happy with Hauppauge I think I will stay with that company. I will probaply go for a PVR150. Are the differences to the PVR350 modell only the radio tuner and the scart-port or is the quality of recording of the PVR350...
Thanks for all the advice. It seems that upgrading my tuner card will be the most promising sollution. As I am quite happy with...
MediaPortal Version: 0.2.0
Windows Version: win xp pro sp2
CPU Type: Celeron 2.8
HDD: Maxtor 6Y080L0
Memory: 2 x 512mb DIMM...
MyFilms changes (MesFilmsDetail.cs)
For anyone interested, here is the source code file for the changer related code. This file is based on the most recnt SVN version of MyFilms on May 28th of 2008. The changes are pretty simple. Thye consist of embedding a Telnet Client object, adding a hook to release any allocations on close, and...
MyFilms changes (MesFilmsDetail.cs)
For anyone interested, here is the source code file for the changer related code. This file is...
Not sure if this is the right area or not but figured it was a good place to start.
Does anyone have or know of anyone who has a...
Which latency monitor are you using ?
Which latency monitor are you using ?
Any other MP users out there having lip sync issues on TV.
Tried different codecs and different sound devices, but no luck...
is not for today :whistle:
is not for today :whistle:
Hi,
Im in the marked for a new projector and i had my eyes set for the Benq w1070. While reading about the projector i stumbled...
Hi, i will try it in my poor english:ooops:
One way is to copy this File into the Mediaportal Folder (C:\documents and settings\all users\mediaportal). Im using a German XP so you have to check the Folders for wrong translation. In every way you should make a backup of the original Keymap.xml before replacing with this one.
The...
Hi, i will try it in my poor english:ooops:
One way is to copy this File into the Mediaportal Folder (C:\documents and...
Hello,
I am trying to use Mediacenter 0.1.0.5.1
I have to tuner cards an haupauge 150 pvr
and one technisat airstar 2. (like...
honestly i'm not sure... it just finds the movies and plays them...
honestly i'm not sure... it just finds the movies and plays them...
I can't figure out how to get subtitles to work on MKV with CoreAVC in Mediaportal 1.0.
DirectVobFilter auto-loading (or however...
Indeed it is, but it also depends on the LCD you have. Not all manufacturers use only the standard resolutions, some allow a bit more over HDMI.
Indeed it is, but it also depends on the LCD you have. Not all manufacturers use only the standard resolutions, some allow a bit...
TV-Server Version: TV-Server 1.0
MediaPortal Version: MediaPortal 1.0 RC3
MediaPortal Skin: Monochrome 2.2
Windows Version: XP...
Ok, i understand.
Have a nice holiday, enjoy !
Ok, i understand.
Have a nice holiday, enjoy !
Hi folks,
MP Version: 0.2. RC1 (same with 0.1.3...)
Skin: MCE
Windows Version: XP MCE
CPU Type: AMD Sempron 3100+
Memory...
Thanks mm for helpful explanations
Thanks mm for helpful explanations
Hi there,
I have been having a few problems with signal break up recently - particuarly on Dave, Really and Pick TV and started...
Maybe it's time for me to upgrade to Windows 10 then. I am really starting to miss out on the most recent features of MP.
Maybe it's time for me to upgrade to Windows 10 then. I am really starting to miss out on the most recent features of MP.
Evening everyone,
Is anyone operating Windows 10 and the latest installation of Mediaportal with iMON Frontview working, in...
As it seems similar I added my problem as well.
Mfg
Flo
As it seems similar I added my problem as well.
Mfg
Flo
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
i think the "use MP tray" is only for launching mediaportal instead of mediacenter with the green button
with the settings i wrote, MCE remote and General HID, i can use nearly all buttons on the remote.. not sure about some, but the most usefull ones are working BUT the info button.
i think the "use MP tray" is only for launching mediaportal instead of mediacenter with the green button
with the settings i...
Hey guys,
Not sure where to post this so feel free to move it if its in the wrong place.
I've created a guide to setup...
Hi again Tesla
The DVD navigator is not one of our components - I believe it is actually a Microsoft component which is bundled with the operating system. There are various DVD navigators available including the Cyberlink one. Most software houses that offer reasonably advanced/DVD playing software have their own. In other words, I...
Hi again Tesla
The DVD navigator is not one of our components - I believe it is actually a Microsoft component which is bundled...
I’ve come across a strange problem and I’m hoping you guys can help me.
I have my collection of DVDs ripped to VIDEO_TS folders...
There are several issues at once - unfortunately some even depend on the DVD itself. But Technec's issue will be addressed soon (The DVD link from home menu is not working although the MyVideo link is working).
There are several issues at once - unfortunately some even depend on the DVD itself. But Technec's issue will be addressed soon...
MediaPortal Version: 0.2.2.0
Windows Version: Win Media Center
Video Card: ATI 9600 XT
Sound Card: Sound Blaster Live
1. TV...
Hi
Ok after I disabled timestretch it seems to be ok - at least after 2h testing
Hi
Ok after I disabled timestretch it seems to be ok - at least after 2h testing
For some reason I'm having big issues with the MPAR and sound becoming more and more out of sync with the picture, it was fine and...
winfast tv 200 deluxe
All who have winfast tv 2000 deluxe and write unagle to create graph MUST INSTALL NEW DRIVER AND NEW SOFTWARE:
http://www.leadtek.com.tw/eng/support/download.asp?downlineid=63&downline=WinFast+TV+2000+XP+%28Deluxe+%2F+FM+%2F+RM%29
software: utility mulilanguage
winfast tv 200 deluxe
All who have winfast tv 2000 deluxe and write unagle to create graph MUST INSTALL NEW DRIVER AND NEW...
From the cvs-changlog: “MediaPortal TVEngine
On 08/02/2006 [11:41:04] dman_LFC added the following change: - WinFast TV2000 XP...
It was the rubber in gimp;)
Conclusion: We need to provide as much as possible informations in the database. How they get used is your decision. I will find my way :cool:
It was the rubber in gimp;)
Conclusion: We need to provide as much as possible informations in the database. How they get used is...
Using MediaPort 8 on Windows 7. For the guide I am following the instructions here for configuring MC2XML and XMLTV. The guid is...
yeah! I got it working, too :lol:
Upgrading the drivers and install cvs version (I used cvs from 02-13-2006) did the trick.
I'm using windows MCE, and I really struggeled to make it work. Installing the hauppauge drivers partly failed, by following the isntructions on the driver site. However, by installing the standalone driver...
yeah! I got it working, too :lol:
Upgrading the drivers and install cvs version (I used cvs from 02-13-2006) did the trick.
I'm...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Thank you for picking up my post, I wasn’t expecting any reply, my initial post was a thank you, then a post to correct my stupidity in not checking everything before posting.
As @Stéphane Lenclud has suggested I will start a new thread about my problem on the forum.
And then if possible, place a link to it from here.
Thank you for picking up my post, I wasn’t expecting any reply, my initial post was a thank you, then a post to correct my...
I have two remotes available to me. I have one Windows MCE remote and one Hauppauge remote. I cannot get the Hauppauge unit to...
I wonder if one of the recent NVidia driver update has fixed this issue.
I've had another funny issue with picture quality in 4K which I documented there:
https://forum.team-mediaportal.com/threads/philips-tv-55puk7150-12-review.134739/#post-1194885
This one is not related to MediaPortal though.
I wonder if one of the recent NVidia driver update has fixed this issue.
I've had another funny issue with picture quality in 4K...
Hi,
Finally upgraded to a 4K screen today and have a weird issue which makes it impossible to use Mediaportal with it.
- When at...
The picture quality should be same whichever renderer you use, the only difference is if your pc setup can make FULL use of the chosen renderer, I use EVR for both XP and Vista\Win7, for me it just seems smoother.
But as the old saying goes, "beauty is in the eye of the beholder", so everyone has there own opinion about this :)...
The picture quality should be same whichever renderer you use, the only difference is if your pc setup can make FULL use of the...
Hi,
I just want to know, what renderer setting gives the best/most beautiful picture quality ?
The EVR is required for DXVA...
AW: active movie window popup.
Since today i have the same Problem.
After a fresh install of my System (XP SP3) with actual drivers of the graphics card (Catalst 10.3) it was neccessary to use EVR instead of VMR because with VMR in Live-TV the picture freezes immediately.
And now, with EVR, TV works within MP, but this window pops...
AW: active movie window popup.
Since today i have the same Problem.
After a fresh install of my System (XP SP3) with actual...
TV-Server Version:
MediaPortal Version: Latest
MediaPortal Skin: Default
Windows Version: Windows XP SP3
CPU Type: Intel Core...
wow, nice spot! The (post from twizzlerite link) as mentioned above fixed all my stutter problems, I dont have to have 'always on top' ticked now for MP, so it doesnt steal focus from my other apps. nice.
The only thing I would be concerned about is that the regedit 'Force10Level9', turns off dx10. Maybe this is only for DWM. Who...
wow, nice spot! The (post from twizzlerite link) as mentioned above fixed all my stutter problems, I dont have to have 'always on...
MediaPortal Version: 1.1 RC3
MediaPortal Skin: Streamed MP
Windows Version: Windows 7 Professional x86
CPU Type: AMD Phenom II X4...
MP1
MP2
1.29.0
IPTV does not consistently connect. Mediaportal client times out before Tv Server establishes timeshifting?
DE
Thanks for your feedback!
Thanks for your feedback!
I'm not sure exactly when this started, I've been dealing with it for a while until I had time to troubleshoot it. I'm pretty sure...
