When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your post!
Useful Wiki information:
Known Issues
Troubleshooting
FAQ
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your...
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your...
Could it be because the tuner was in use in another application?
Good luck with whatever other software you try.
For anyone else reading this in future:
It is better to start a thread -->here<-- than revive such an old thread.
Post your log files as per the instructions -->here<-- so we have the information we need to be able to...
Could it be because the tuner was in use in another application?
Good luck with whatever other software you try.
For anyone else...
EVERYONE WITH ATSC CARDS: If you can get your card to autotune, Please disable EPG. Doing this has allowed me to use a VBox DTA-150...
I had the freezing problem only with older drivers but i dont know with which...
with 9.11 legacy and 10.2 legacy i had only the unable to play error caused by the /3GB switch in boot.ini
now there are no freezing problems. (with win xp, 10.2 legacy without ccc, only driver but i think with ccc there are no problems too, saf500 codec)
I had the freezing problem only with older drivers but i dont know with which...
with 9.11 legacy and 10.2 legacy i had only the...
TV-Server Version:
MediaPortal Version: 0.2.3.0 RC2 and RC3
MediaPortal Skin: BleTwo/default
Windows Version: WinXP MCE 2005...
Looks very interesting solution: FFDSHOW logoaway feature is easier to configure based on a file name for the automatic profile selection. The TS file name is hidden when RTSC is used.
Looks very interesting solution: FFDSHOW logoaway feature is easier to configure based on a file name for the automatic profile...
===================================================================
EDIT: The modifications in this thread are now included in MP...
Thank you again for having a look into my log files.
I do really think this is a Windows 10 issues because with Windows 8.1 there was not a problem.
So is it possible to disable that away mode at all? So that MediaPortal will be active even the monitor is switched of...
Thank you again for having a look into my log files.
I do really think this is a Windows 10 issues because with Windows 8.1 there...
I have searched and haven't seen others with this issue. I though it was the skin, but I changed that and it still happens...
Correct - it was deemed a re-work, and only bug fixes were allowed at the time.
The TsReader here - https://forum.team-mediaportal.com/780079-post59.html - has all patches to date.....
Tony
Correct - it was deemed a re-work, and only bug fixes were allowed at the time.
The TsReader here -...
I hve just upgraded to RC3 and have noticed that there is a audio/video sync problem when watching live TV. The audio is delayed...
Very cool! I'm actually in the middle of migrating my whole MediaPortal system (complete with 5 tuner cards and different sources) over to a new Ryzen 3 - based server this weekend. I'll give this a try when I get to my Colossus 2 - which won't be until tomorrow at this rate. Thanks for the heads-up!
Very cool! I'm actually in the middle of migrating my whole MediaPortal system (complete with 5 tuner cards and different sources)...
Ever since my family upgraded to HD dish I've been trying to get our media PC to record the playback. I am currently just...
I added a little Schedules Direct setup info to the mc2xml/xmltv setup guide, see
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/13_Setup_Guides/2_TV_Setup/4_TV_Guide_Setup_(EPG)/XMLTV_mc2xml
I added a little Schedules Direct setup info to the mc2xml/xmltv setup guide, see...
I'm evaluating MP1.6 as a replacement for SageTV (I'm still wrestling with getting usable program guide data to schedule...
I don't believe this is solved. MP1.23 contains three EN IMDB grabbers and all of them result in Plot = "unknown". Solved would be that the latest MP1.23 or latest online grabbers only have one EN IMDB grabber and it gets all the data correctly.
To the extent that there is a solution outside of a Mediaportal official release, is that...
I don't believe this is solved. MP1.23 contains three EN IMDB grabbers and all of them result in Plot = "unknown". Solved would be...
This is not just in 1.20, I had the problem in 1.19 as well. But to confirm the problem I upgraded to the latest. I have tried...
Thanks for the head up. I was aware of this and i will use the latest 1.1.0 Alpha + latest SVN.
I notice also that some people are having issues with the hauppuage cards not scanning etc. I have a novaT-500 and the NovaS2 installed with a dish and 4LNB's so i will be sure to check that out and give any help/feedback i can :)
Regards
Kev
Thanks for the head up. I was aware of this and i will use the latest 1.1.0 Alpha + latest SVN.
I notice also that some people are...
Well I Installed Windows 7 Beta on a a new Partition. I really like it only problem is I tried to install Media Portal and it says...
Just to update this for anyone who stumbles across this old thread: Updating to a Haswell Intel NUC and Windows 8.1 has done nothing to solve the crashing problem. In fact the NUC has no optical out so now I must buy a Dr HDMI again!
Just to update this for anyone who stumbles across this old thread: Updating to a Haswell Intel NUC and Windows 8.1 has done...
Steps to Reproduce:
1. Use MP in any way.
2. Turn off TV.
3. Turn TV back on.
4. Windows error appears.
Using Windows 7, MP...
Hey all,
So... I did some research and found out that CableLabs changed the CableCard specification to allow content provider DRM to override the CCI flags applied by the cable companies. In many cases, a cable company could override a content provider's DRM by setting the feed to "CCI Copy Freely." In my particular instance, WOW...
Hey all,
So... I did some research and found out that CableLabs changed the CableCard specification to allow content provider DRM...
Hey everyone,
I'm consistently having the TV server crash on me right as recordings end. Its not happening everytime... but it...
For some reason the ATI installer isn't accepting your cards ASIC as elligible for the encoder instal.
Use the 6.6 encoder package as this is not as restrictive as the 6.8 ; I have both installed on my system and run MMC9.15 and MP.
Run the 6.6 encoder instal twice and force the modify settings for all options again on the...
For some reason the ATI installer isn't accepting your cards ASIC as elligible for the encoder instal.
Use the 6.6 encoder...
Hi - I worked with a chap in the US (RichardTV) with an AIW 9800 Pro card in an attempt to get it working with the MPEG-2 TV engine...
Hi,
Twirrim, Are you running XP or MCE? XP will not run dual DVT cards without some tweaking. MCE will do it out of the box. Check out the Tips and Tricks forum for the location of the newer dlls that MS has only released for MCE (thereby trying to stop any rival products).
chewbacka, I think the 777 card should work. It's...
Hi,
Twirrim, Are you running XP or MCE? XP will not run dual DVT cards without some tweaking. MCE will do it out of the box...
Has anybody managed to use MP with this card?
With what version of MP and Aver software?
I just keep getting errors and I would...
I tried every card definitions. NSP, WDM and VIVO... none of them worked.
In Graphedit the ATI Encoders are not listed. I tried to install them several times and i tried to register the encoder by regsvr32 atimcenc.dll.
But without sucess :(
I tried every card definitions. NSP, WDM and VIVO... none of them worked.
In Graphedit the ATI Encoders are not listed. I tried to...
An overview of the latest support of ATI AIW cards with MediaPortal v0.2.x.x.
(early pages in this thread should be ignored as out...